Moen T6107 series User manual

DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia holes
8" on center
• 1/2" copper connections
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and
stainless steel material
STANDARDS
When trim kit is added to M-Pact valve, the product is:
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
KINGSLEY™
Two-Handle Wall Mount Faucet
Models: T6107 series
Valve: 9400
2-7/8"
(73mm)
2-1/2 "
(64mm) 2-7/16" Dia.
(62mm)
2-7/8"
(73mm)
7-1/2"
(190mm)
MAX WALL THICKNESS
1-3/4” (45mm)
15˚
2-1/8"
(54mm)
3” (76mm) MIN.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11
M•pact™ System