Moen CAMELOT 22241 User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
SINK DESCRIPTION
•Manufactured of 20 gauge, type 301 nickel-bearing
stainless steel
•The large bowl is a minimum of 12" wide by 10"
and is 5-1/2" deep
•The sink ledge has two fixture mounting holes,
1-11/32" in diameter and 4" on center
•Has one 2" diameter SEALTITE recessed drain with
drop on basket
•Soundshield undercoating maximizes sound deadening
and inhibits condensation
•The exposed surfaces are polished to a lustrous
satin tone finish with a satin band
•Includes all necessary mounting hardware
CUT OUT DIMENSIONS
•Cut out dimensions are 14-3/8" x 14-3/8" with a
3/8" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
•Designed and manufactured to comply with the
requirements of: ASME A112.19.3M and all requirements
referenced therein
WARRANTY
•Warranted for ten years against material or
manufacturing defects
Installation Detail
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
5-1/2"
(140mm)
BOWL
DEPTH
12"
(305mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE
DRAIN
ASSEMBLY
7-1/2"
(191mm)
2-5/8" R. TYP.
2"(51mm)
TYP
1-11/32"
DIA. TYP.
15" (381mm)
8-1/2"
(216mm)
10"
(254mm)
BOWL
3-1/2"
(89mm)
11"
(279mm)
3/8" (10mm)
R TYP.
15"
(381mm)
WIDTH
Camelot®
Single Bowl Bar Sink
Model: 22241
(K-1515-2)
Rev. 4/05