Moen Camelot 22245 User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 4/05
SINK DESCRIPTION
•Manufactured of 20 gauge, type 301
nickel-bearing stainless steel
•The large bowl is a minimum of 12" x 190" x 5-1/2"
•The sink ledge has two fixture mounting holes,
1-11/32" in diameter and 4" on center
•Includes 4901 bar faucet with a 2.2 GPM flow rate
•Has one 2” diameter SEALTITE recessed drain
•Soundshield undercoating maximizes sound
deadening and inhibits condensation
•The exposed surfaces are polished to a lustrous satin
tone finish
•Includes all necessary mounting hardware
CUT OUT DIMENSIONS
•Cut out dimensions are 12-1/2" x 16-5/8", with a
3/4" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
•Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
Also meets applicable requirements of ANSI A117.1
WARRANTY
•Warranted for ten years against material or
manufacturing defects
Camelot®
Single Bowl Bar Sink
Model: 22245
(K-1317-2-WF)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
6"
(152mm)
2-5/8" R.
TYP.
2"
(51mm)
1-11/32" DIA. TYP.
13"
(330mm)
WIDTH
5"
(127mm)
10"(254mm)
BOWL
5-1/2"
(165mm)
17-1/8"
(435mm)
LENGTH
1-1/2"
(38mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
SEALTITE DRAIN
ASSEMBLY WITH
DROP IN BASKET
3-5/8"
(92mm)
12"
(304mm)
2"SEALTITE
DRAIN
3/4" R.
TYP.
Installation Detail
ADA