Moen HKEB500-D User manual

INS12941 - 07/11
Record Purchased Model Number:
(Save instruction sheet for future reference)
Image is for reference only
(Style varies by model)
Safety Glasses Adjustable Wrench
HELPFUL TOOLS
For safety and ease of replacement, Moen rec-
ommends the use of these helpful tools.
PLEASE CONTACT MOEN FIRST
For Installation Help, Missing or Replacement
Parts, please consult your local dealer.
www.moen.com.hk
Bidet Toilet Seat
HKEB500-D / HKEB500-E
INSTALLATION INSTRUCTIONS
Phillips Screwdriver

1
Parts List
A. Bidet Toilet Seat
B. Water Inlet Hose
C. T-Shaped Connector (G1/2)
D. Expansion Nuts
E. Adapter Plate
F. Sliding Plates
G. Connecting Bolts
C
B
A
G
F
E
D

2
※Center hole spacing must be between 4-1/5" and 6-1/2" (107mm - 165mm).
※The tee connector used for this product is G1/2.
※For HKEB500-E, the distance from the mounting hole to the front end of the toilet must be between 16-9/10" and 18-9/10"
(428mm - 480mm).
※For HKEB500-D, the distance from the mounting hole to the front end of the toilet must be between 16-1/10" and 18-1/10"
(410mm - 461mm).
Sizing Requirements
Before installing the product, please make sure you meet all of the requirements listed below.
HKEB500-D HKEB500-E
See below
4-1/5" to 6-1/2"
(107mm - 165mm)

3
1 2
Insert the Connecting Bolts (G) into the Sliding Plates (F). Insert the Connecting Bolts (G) with the Sliding Plates (F) into the
Adapter Plate (E).
Installation Steps
Preparation
CAUTION:The water pressure limit ranges from 10 to 110 PSI (0.07-0.8MPa). Please use as instructed. The water shutoff valve should be
near where the product can be installed or dismantled.
F
G
G
E
F

t
4
1
Installation of Your Product
Assemble Expansion Nuts (D), Adapter Plate (E), Sliding Plates (F)
and Connecting Bolts (G) into the ceramic in the order shown in
the diagram.
Adjust the fixed base and lock the Connecting Bolts (G).
3
Push forward the Bidet Toilet Seat (A) to support the fixed base. You will hear a "Click" noise once the seat is securely locked in.
CLICK
2
4
F
G
D
E
G
A

5
1
Connecting the Water Inlet Hose
Press the button on the side of the Bidet Toilet Seat (A) and pull
forward to unlatch from fixed base.
Close the valve.
3
Disassemble the water supply hose.
4
Connect the T-shaped Connector (G1/2) (C) to water supply pipe
and Water Inlet Hose (B), and then open the valve.
2
A
C
B

6
Warning Ignorance would result in body injury or death.
Attention! Used under the above “Warning”column, be sure to comply.
Prohibited Action!
Do not dismantle!
Keep away from fire!
Operation should follow the manual!
Use Instructions
Safety Precaution
Read All Instructions Before Use
Thanks for purchasing our products. In order to make a better use of the product, please read this manual carefully and install the product
correctly. Keep this manual properly for future reference.
The below precautions are important for safe use, and would cause serious consequence under different circumstance.
Be sure to follow them.
Terms and Symbols

7
Do not place a lit cigarette along with other burning
objects into the unit.
※ Risk of fire.
Warning
Any person with a disability, the elderly, and children,
should be using this product with the supervision of
another individual.
Do not dismantle, repair or alter this product on
your own. Call in a professional or contact Moen for
future advise.
※ Risk of fire and/or other accident that may lead to injury.
This product is not a toy. Advise children not to play
with product.
※ Risk of injury.
Do not use old supply hose to connect to seat elbow.
Use the one provided with your product. Anything
else connected to the older hose may need replaced.
※ Risk of water leakage and/or property loss/damage.
Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection.
※ Risk of urocystitis or dermatitis. Untreated water may also
cause corrode inner workings of unit.
Do not apply any force to the unit's seat and lid.
Do not stand on the lid or open or close the lid and
the seat forcefully.
※ This may result in product damage and/or user injury.
For cleaning or maintenance of plastic parts, do not
use any harsh cleaning agents.
(These include, but are not limited to products such
as: concentrated sulfuric acid, concentrated nitric acid, glacial
acetic acid, carbon tetrachloride, chloroform, acetone, butanone,
benzene, methylbenzene, phenol, methylphenol,
dimethylformamide, methyl ether, soybean oil, acetate, 40%
nitric acid, thick salt acid, 95% alcohol, kerosene, gasoline, or
brake oil, etc.)
※ Risk of damage parts that can lead to accidents and injuries.

8
Basic Use Function
Rear Wash
1. Turn the lever counterclockwise from the vertical position.
2. The nozzle for rear wash extends forward and the fresh water spray function starts.
3. The water volume decreases while turning the lever towards the vertical position. It will completely shut
off when the lever is on the vertical position.
Front Wash
1. Turn the lever clockwise from the vertical position.
2. The nozzle for feminine bidet (front wash) moves forward and the fresh water spray function starts.
3. The water volume decreases while turning the lever towards the vertical position. It will completely shut
off when the lever is on the vertical position.
Note: Front wash nozzle is slightly longer when fully extended and directs spray more in the forward direction.
Stop
1. During wash or bidet status, rotate the lever to the vertical position to stop the freshwater spray.
2. The nozzle moves back to the original position.
3. The water volume decreases while turning the lever towards the vertical position. It will completely shut
off when the lever is on the vertical position.

t
9
1
Cleaning and Dismantling
Clean the exterior of the Bidet Toilet Seat using a smooth sponge/
cloth with diluted dish detergent to clean the product. Do not use
the following: hydrogren chloride detergent, paint thinner,
benzene, abrasive paper, polishing agent, bleach, or chlorine.
Clean the spray nozzles. Pull out the nozzle softly and use a
smooth cloth, sponge or toothbrush with liquid dish soap to clean
the nozzles.
3
Turn the water supply off, remove the stainless steel water inlet
hose and clean the washer. Remove the washer with a pair of
pliers. Clean the washer.
Dismantle the Bidet Toilet Seat by closing the cover, pushing the
dismantle button, and pulling the Bidet Toilet Seat forward.
2
4