Moen SOLACE TS4714 Series User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 3/11
8" (203mm) - 16" (406mm)
Centers
ESCUTCHEON
DIA. 2"
(51mm)
ESCUTCHEON DIA.
2-1/8" (54mm)
LIFT ROD
2-1/4” (57mm) MAX.
DECK THICKNESS
10-1/4”
(260mm)
6”
(152mm)
7”
(178mm)
2-7/8"
(73mm)
Quick
Connect
Hose
Assembly
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
- Metal construction with various finishes identified by suffix
- 1/2" IPS connections will accept standard ball nose connection for 3/8” tubing
- Hydrolock™ quick connect installation
- Includes metal pop-up waste assembly
- For use with S948 valve
- Designed to be installed through 3, 1-1/8” min. dia. holes, 8 -16” on center
OPERATION
- Cross handles
- Maximum handle rotation angle is 90˚ to full on for either handle
- Rotate hot side handle counterclockwise to open and clockwise to close
- Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)
- Features a laminar flow pattern for dramatic water presentation
CARTRIDGE
- 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials
STANDARDS
- Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
- Certified to ANSI/NSF 61/9
- Contains no more than 0.25% weighted average lead content
- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
- 5 year warranty if used in commercial installations
SOLACE™
Two-Handle Widespread
Lavatory Faucet Trim
Models: TS4714 series
NOTE: FOR DECK THICKNESS 1-3/8" - 3", USE SERVICE KIT
#115001. SERVICE KIT INSTALL THROUGH 1-1/4" DIA. HOLE.