Moen LEGEND MOENTROL 3189 User manual

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
•Chrome plated metal construction
•Pressure balancing valve design with integral
check stops, 1/2" CC connections
•Supplied with adjustable temperature limit stop
•Showerhead, arm, flange and diverter tub spout
OPERATION
•Knob style handle, Pull-on push-off design
•Temperature operates through an 180° arc of handle
travel (full cold to full hot)
•Adjustable temperature limit stop to control
maximum hot water temperature
•Pressure balancing mechanism maintains selected
discharge temperature to ± 3°.
FLOW
•Showerhead is limited to 2.5 gpm (9.5 L/min) Max
CARTRIDGE
•1225 cartridge design
•Nonmetallic/nonferrous and stainless steel materials
•Accommodates back to back installations
STANDARDS
•Third party certified to meet CSA B-125, ASME A112.18.1M,
ASSE 1016 and all applicable requirements
referenced therein
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations
LEGEND®MOENTROL®
Single-Handle Tub/Shower Valve
Model: 3189
HC
7-1/2" (191mm)
MIN.
HOT
INLET
COLD
INLET
FINISHED
WALL LINE
C
L
7" (178mm)
ESCUTCHEON
DIAMETER
5-1/2"
(140mm)
WALL OPENING
FLOOR
TUB RIM
6'-6"
(1981mm)
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
4-1/2"
(114mm)
2-9/16" (65mm) MAX.
1-15/16" (49mm) MIN.
1-1/4" (32mm)
6" Min -11" Max
Rev. 8/05