Moen Lindley 84916 series User manual

3-1/2"
(89mm)
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
LIFT
ROD
1-3/4"
(45mm)
MAX.
4-1/2"
(114mm)
TOP OF
MOUNTING
SURFACE
6-1/8" (154mm)
(ESCUTCHEON WIDTH)
5-1/8"
(129mm)
7-7/8"
(201mm)
2-5/8"
(68mm)
4-1/2"
(114mm)
LINDLEY™
Single-Handle Lavatory Faucet
with Plastic Waste Assembly
Model: 84916 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 – 1" DIA, HOLES, 4" ON CENTER
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes pop-up type waste assembly
OPERATION
• Pivot action lever style handle
• Temperature controlled through 180˚ degree arc of handle travel
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Can accommodate reverse piping and back to back installations
STANDARDS
• Third party certified to meet CSA B-125.1, ASME A112.18.1,
ICC A117.1 and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Water Drinking Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations