Moen MONTICELLO POSI-TEMP 2348 User manual

Specifications
®
CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158 T/S-43
DESCRIPTION
•Metal construction with a chrome plated, LifeShine®
polished brass or glacier finish
•Pressure balancing cycle valve design with an
adjustable temperature limit stop
•1/2" IPS connections
•Includes adjustable showerhead, arm,
flange and diverter tub spout
OPERATION
•Handle operates counterclockwise through a 270°
arc with off at 6 o’clock and maximum hot at the 9
o’clock position. Shut off in clockwise direction
•Adjustable temperature limit stop to control
maximum hot water temperature
•Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW •Showerhead is limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
•1222 cartridge design
•Nonmetallic/nonferrous and stainless steel materials
•Accommodates back to back installations
STANDARDS
•Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
•Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•5 year warranty if used in commercial installations
MONTICELLO®POSI-TEMP®
Single-Handle Tub/Shower Valve
Models: 2348, 2348CP,
2348P, 2348W
NOTE: See reverse side for illustrated
parts and optional handle inserts
7" (178mm)
ESCUTCHEON
DIAMETER
HOT
INLET COLD INLET
FINISHED WALL LINE
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
1-11/16"
(43mm)
7-1/2"
(191mm)
MIN.
TUB RIM
6'-6"
(1981mm)
L
C
FLOOR LINE
L
C
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL FACE OF STUD
1 3/8"
(35mm)
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
THIN WALL APPLICATION
THICK WALL APPLICATION
ADA symbol applies to shower
valve control only.
Rev. 11/98
ADA