MOHOS LASO User manual

QUICK START GUIDE

OVERVIEW
MOHOC BELIEVES THE WORLD’S
TOUGHEST WARRIORS DESERVE
ELITE, CUSTOM-BUILT GEAR TO
GUARANTEE MISSION SUCCESS.
EVERYTHING WE DO IS
DESIGNED TO SURPASS THE
EXPECTATIONS OF OPERATORS
WORKING IN THE HARSHEST
ENVIRONMENTS IMAGINABLE.
MOHOC.COM

OVERVIEW
Included in the box:
• 1 LASOTM Transmitter
• 1 LASOTM Viewer
• 2 Li-Ion rechargeable batteries
• 2 USB charging cables
The LASOTM Tactical Video Transmitter
LASOTM Transmitter
LASOTM Viewer
Rechargeable battery
USB charging cable
Connection Indicator light
1
2
3
4
5

OVERVIEW
4
1 2
3
4
3
55

Introduction
• LASOTM Transmitter connects to the MOHOC®
Camera and is recognizable by the orange
camera icon:
• LASOTM Viewer connects to a smartphone or
tablet and is recognizable by the orange
phone icon:
• For best live streaming performance keep the
LASOTM Transmitter near the MOHOC® Camera
(body worn) and keep the LASOTM Viewer near
the phone/tablet being used for viewing.
OVERVIEW

• Follow the steps in this Quick Start Guide
to connect and livestream from your MOHOC®
Camera, via the LASOTM Transmitter/ LASOTM
Viewer to your phone or tablet, increasing the
video range of your MOHOC® Camera by 10x.
Before pairing with your phone or tablet:
• Download the MOHOC® app to your phone or
tablet (Android® or iOS®).
• If you purchased the LASOTM separately from
the camera, skip ahead to PAIR MOHOC® WITH
LASOTM TRANSMITTER.
• If you purchased a MOHOC® or MOHOC® IR
Camera directly from MOHOC, Inc. with a LASOTM,
then start with setup instructions to TURN
WIFI ON.
OVERVIEW

3. Release the upper
latch and remove
the door.
2. Pull the lower
latch out.
TURN WIFI ON
1. Squeeze both
latch releases.
4. Insert Micro SD card
(Class 10, UHS-1 or
higher required).
Sold separately.

TURN WIFI ON
5. Insert MOHOC® rechargeable battery.
7. Change camera WIFI/BT setting to ON by
pressing the far left Menu button twice
until the WIFI/BT screen is reached.
Scroll right to reach the ON option and press
SELECT
8. Power OFF the MOHOC® Camera.
9. Close the door (reversing steps 1 to 3).
Ensure lower latch clicks shut completely.
10. Proceed to CONNECT & STREAM WITH
LASOTM instructions.
6. Turn MOHOC® Camera
toggle to ON position.

PAIR MOHOC®WITH LASOTM TRANSMITTER
Introduction
• Follow these steps if you already own a
MOHOC® Camera and purchased the LASOTM
without the camera or if you want to pair a
different MOHOC® Camera to any LASOTM
Transmitter.
1. Turn MOHOC® Camera
toggle to ON position
with WIFI ON.
2. Open phone/tablet’s WiFi setting and connect
to the MOHOC WIFI network (default
password is Eliteops).
3. Open MOHOC® App and connect to the
camera to see the live video preview.
4. Choose the settings gear icon in top right
corner of live preview screen. Select WIFI
Settings.

5. Change the SSID and Password to match
LASOTM Transmitter. The LASOTM Transmitter
SSID & Password are found under the lid of the
LASOTM Transmitter. Both are case sensitive.
SSID: LasoXXX Password: Eliteops
PAIR MOHOC®WITH LASOTM TRANSMITTER
6. Power camera OFF for the changes to
take effect.
7. Close MOHOC® App.
8. Go to Connect and Stream with LASOTM.

CONNECT & STREAM WITH LASOTM
1. Power ON the
LASOTM Transmitter
by plugging in the
Micro USB power
cable from the
battery to the LASOTM
power port.
Micro USB power cable
LASOTM power port
1
2
1
2
2. Power ON the LASOTM Viewer by plugging in
the Micro USB power cable from the battery
to the LASOTM power port (same as pictured
above for LASOTM Transmitter).
3. Power MOHOC® camera ON with WIFI ON.
4. Allow 20-30 seconds for all 3 devices to pair.
Once the external light on the front of both
the Transmitter and Viewer are solid Green,
then all devices are connected. If either Green
light is blinking see Helpful tip #4 at the end of
the instructions.

CONNECT & STREAM WITH LASOTM
5. Connect to LasoXXX Viewer:
a) Open phone/tablet’s wireless network
settings and choose network
LasoXXX_Viewer.
Then enter password Eliteops.
b) Open the MOHOC® App and add the
LasoXXX_Viewer (re-enter password if
prompted).
See Helpful Tip #5 if the live preview screen
does not open.
Live video should now be streaming.
See Helpful Tips to understand all LASOTM features,
troubleshoot, and improve performance.

HELPFUL TIPS
1. To live preview the video on a phone/tablet
and simultaneously record to the MOHOC®
Camera’s Micro SD card, set your cameras
video setting to 720p 30FPS or 720p 60FPS.
The higher resolutions and frame rates (1080p
30FPS for example) are unable to wirelessly
livestream video and record simultaneously.
720p 30FPS/60FPS are the only options
capable of steaming and recording at the
same time.
2. The camera WIFI ONLY turns on when you
have the camera toggle in the ON position.
When operating the camera in the RECORD
position ( ) WIFI does not turn on.
3. To pair a different MOHOC® Camera to a
LASOTM Transmitter, update the SSID &
Password of the new camera to match the
SSID & Password of the LASOTM Transmitter
you wish to connect. See Pairing MOHOC®
Camera to LASOTM Transmitter Instructions.
4. Blinking green light on the front of either
LASOTM means it is not connected to its
paired device:

HELPFUL TIPS
a) LASOTM Transmitter blinking - either
the LASOTM Transmitter is no longer in
range of its paired MOHOC® camera, or the
paired MOHOC® Camera has turned OFF/
BATTERY IS DEAD.
b) LASOTM Viewer blinking - either the
LASOTM Viewer is out of range of the LASOTM
Transmitter, or the LASOTM Transmitter has
turned OFF/BATTERY IS DEAD.
5. If the App is not displaying the live video
screen even though both LASOTM Transmitter
and LASOTM Viewer lights are solid green,
confirm the wireless network connections.
The phone/tablet must connect to the
“LasoXXX_Viewer” wireless network, not the
“LasoXXX” network, for the LASOTM to work.
Also check the MOHOC® App is connected to
the “LasoXXX_Viewer” network.
6. To Power OFF the LASOTM Transmitter and
LASOTM Viewer, unplug the USB power cable
from the Power port.
7. Only one phone or tablet can to be connected
to the LASOTM Viewer at a time.

LASOTM RECHARGEABLE BATTERIES
1. The LASOTM batteries are removable and can
be replaced quickly with a fully charged
battery. Pull the battery up from the battery
bay to remove and replace.
2. Charging: Plug the
included Micro
USB cable into
the side battery
port and a
USB power
source.
3. Battery Light Indicator: the light on the back of
the battery indicates power level:
Green = Full
Yellow = Medium
Red = Low
a) While charging the light will flash in the
color of its power level.
b) Solid Green while charging means
battery full.

Contact [e-mail] or visit
www.mohoc.com for assistance, additional
product information and features.
+1.208.806.1391
[email protected]
www.mohoc.com
© 2019 MOHOC Inc. All rights reserved.
Part Number: MH-LAS1
CONTACT DETAILS
Rev 01.19