Monarch 9876 User manual

•Heavy Duty Welded Steel
Frame / 8” Wheels / 5/8”
Axel / 4” Swivel Locking
Wheels
•Ideal for Tabletop Printers
•Power Management
System
•Battery Status Panel
•Black Powder Coated
Monarch®9876™MWS™
(Mobile Work Station)
Product Specification
STANDARD FEATURES
Dimensions (MWS as shown above)
Height – 39" (991 mm)
Width – 24" (610 mm)
Length – 34" (864 mm)
Weight - 180 lbs. (82 kg)
(w/2 batteries, charger, steel top w push /
pull handles, wheels)
Weight (w/options shown in Options photo) 210 lbs
(95 kg) (Table Top, 300W AC Inverter, full mid shelf
enclosure w/ file pockets)
Height - 40" (1016 mm) with Table Top
Batteries:
24 V Standard: (2) 12-volt, 55 amp-hours, deep cycle
batteries, sealed lead-acid, non-venting, and no
transportation restrictions
Battery Status Panel:
Lights - Red, Yellow, and Green
Tone - Battery Low Alert
Power:
24 VDC
Charger Input: (Voltage Select)
115 VAC +/- 10% (60Hz)
230 VAC +/- 10% (50Hz)
IEC Connection
Charger Output:
5 hours "typical" charge time
Reverse polarity and short circuit-proof
Temperature compensated
Smart charging
10-amp peak charging current
Product Warranty:
60 days parts and labor - 1 year parts only
Full written warranty statement available on request.
ENVIRONMENT RANGES
Operating Temperature:
40° to 104° F (5° to 40° C)
Storage:
40° to 140° F (5° to 60° C)
Humidity/Operating and Storage:
5% to 90% non-condensing
Electrostatic Discharge and Air Quality:
Some problems with electronic equipment may occur in environments prone to static discharge or extreme dust
conditions. Paxar suggests that you take precautions to minimize these problems.

©2007 Paxar Americas, Inc. All rights reserved.
BC-SP-013 Rev. 04-08
800.543.6650 prompt 5
937.865.2554 fax
www.paxar.com
Monarch
®
9876
™
MWS
™
(Mobile Work Station)
PERFORMANCE
AC Power Sources:
Pure-Sine Wave Inverter
24 VDC / 300W / 115VAC
Continuous Output: 300W
Surge (3 seconds): 400W
Built-in GFCI Duplex Outlet
UL / TUV/ CE Listed
DC Power -
85 hours battery duration in "typical" conditions
AC/DC Power Supports full AC power with support for DC-powered 98X5CR Series printer on same MWS.
Cycle Use:
100% depth of discharge, approx. 250 cycles
50% depth of discharge, approx. 550 cycles
30% depth of discharge, approx 1200 cycles
Cycle life is approximate and many factors affect individual batteries performance
SPECIAL CONSIDERATIONS
•The MWS is designed for 9825CR and 9855CR (Cart-Ready) DC-powered printers. Note: Complete printer
specification can be found on 9825 and 9855 printer pages.
•938™ Verifier and 926™ Knife are not supported with Cart-Ready printers.
•Addition of other peripheral devices will decrease runtime time between battery charges.
OPTIONS
•24 VDC (with M098X5CR harness)
•24 VDC / 300W / 115 VAC Pure Sine Wave Inverter
•24 VDC (Symbol or Intermec Terminal Harness)
•24 VDC w/ DC / DC converter (24V to 12V)
•Auxiliary Shelf (1 or 2)
•Table Top 20" x 26" x 1" (508mm x 660mm x 25mm)
•Mid-Shelf Enclosure
•File Pockets
•Rubber Mats
In our ongoing effort to deliver the best technology, specifications are subject
to change without notice.