Monicon GTR-100B User manual

Monicon International Co., Ltd GTR-100BCP
1
GTR-100B Control Panel
User Manual
Web Site：http://www.monicon.com.tw
E-mail：[email protected]

Monicon International Co., Ltd GTR-100BCP
2
Panel Description
Volt. Meter - Indicating generator output voltage
Amp. Meter - Indicating generator output current
GTR-100 – Generator Controller
Operation Selection - To set the generator in Manual., Off/Reset, A.T.S. mode.
Water Temp. Meter - Indicating engine coolant temperature
Oil Pressure Meter - Indicating engine oil pressure
Emergency Stop – During emergency situations, press this button to close the fuel
valve and stop the engine. To reset, turn the button clockwise.

Monicon International Co., Ltd GTR-100BCP
3
Mode Description:
Manual: In manual mode, controller switches the power of the Gen-set into the
load.
AUTO: In auto mode, controller detects the utility failure and order the
procedure of the Gen-set power supply when received the ATS signal
from outside.
OFF/Reset: In off mode, controller turns off the generator.
Dimensions

Monicon International Co., Ltd GTR-100BCP
4
Back View

Monicon International Co., Ltd GTR-100BCP
5
Terminal wiring Description
FrontPanel Rear Panel

Monicon International Co., Ltd GTR-100BCP
6
AC Connection
DC connection