MoniServ DAC-12C024MSS Reference guide

MoniServ, Inc.
http://www.moniserv.com
http://www.lcdpart.com
Backlight Inverter Installation Procedures for ViewSonic VX900
There are no screws to remove on this model, you
need to use small flat head screw drive to open the
back cover, starting from the bottom of LCD Monitor
Set the monitor
upside down

Use Flat head screw
drive sta
r
tin
g
from here

Set Monitor Face up
and lift up this Control
panel and set it aside
Remove these
two screws

Remove Front Bezel

Remove these screws
Disconnect
S
p
eaker wires
Remove LCD Panel
from Back Cover
Disconnect Speaker wires

Set LCD Panel Face down
Remove this screw
and metal cove
r
Backli
g
ht Inverte
r

Replace with MoniServ DAC-12C024MSS inverter board. Re-install all component, metal
chassis, circuit board and back cover. VX900 should work now.
Disconnect CCFL
connectors
Disconnect this cable