Monogram Monogram ZET1038PFSS User guide

Specification Created 3/03
ZET1038PF – GE Monogram 30" Professional Convection Single Wall Oven
Dimensions and Specifications (in inches)
Cutout Dimensions:
Height 23" max.
Width 28" min.
28-3/8" max.
Depth 23-1/2" min.
Cabinet depth required from front frame to inside rear
cabinet wall.
Most 30" wall cabinets can be used with this unit.
The opening between the inside walls must be at least
28" wide.
Allow minimum of 17-3/4" for clearance to adjacent
corners, drawers, walls, etc., when door is opened.
Allow 3/4" for overlap of oven over side edges
of cutout.
Allow 1" for overlap and clearance of oven over top
of cutout and allow 1/4" at bottom for clearance.
Installation Information:
Before installing, consult installation instructions,
packed with the product, for current dimensional data
and for alternate installation options.
Monogram Built-In Convection Single Ovens require
a separate, properly grounded 3-wire 208/120 or
240/120 volt, 60Hz power supply, protected by a time
delay fuse or circuit breaker. Ovens are supplied with
a flexible power cable.
Convection single ovens are rated at 3.3 KW at
240 volts and 2.8 KW at 208 volts.
24"
25"
30"
2"x 4" or
Equivalent Runners
23-1/2"
21-1/4"
23-1/4"
29-1/4"
22"
30"
23"
28" min.
28-3/8" max.
Locate junction box
above or below
cutout or through
cabinet sides.
34"
Must Support 300 lbs. For answers to your Monogram,
®GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
R
Listed by
Underwriters
Laboratories

Specification Created 3/03
ZET1038PF – GE Monogram 30" Professional Convection Single Wall Oven
Features and Benefits
• Self-Cleaning Convection Oven with Auto Self-Clean Latch
• 2 Halogen Interior Oven Lamps
• Electronic Clock and Minute Timer
• 4 Porcelain Self-Clean Oven Racks
• Roasting Rack
• Convection Bake and Convection Roast
• Under Counter Installation Option
• Model ZET1038PFSS – Stainless steel