Monogram ZEK7000SHSS User manual

Product Specification Revised 9/16
MONOGRAM 27" BUILT-IN SINGLE OVEN ZEK7000SHSS
25" (63.5)
min cutout width
26 3/4" (68.0)
7/16"
(1.1)
3/4"
(1.9)
27 5/8"
(70.2) min
cutout height
23 1/4"
(59.1)
6 3/8"
(16.2)
5 1/4"
(13.4)
24 5/8" (62.6)
8 3/8"
(21.3)
14 15/16"
(38.0)
1 5/16" (3.3)
3 1/2"
(8.8)
1 7/8"
(4.7)
7 1/4"
(18.4)
28 13/16"
(73.2)
15/16"
(2.4) 15/16" (2.4)
9 3/8"
(24.0)
24 7/8" (63.2)
2"
(5.1)
26 5/8"
(67.7)
8 3/8"
(21.4)
20 9/16"
(52.2)
min
ZEK7000SHSS
FRONT VIEW (SHOWING CUTOUT OVERLAP)
SIDE VIEW
TOP VIEW
OPEN OVEN DOOR
SHOWING DOOR CLEARANCE
Dimensions in parentheses are in centimeters unless
otherwise noted. Actual product dimensions may vary
due to manufacturing tolerances.
* Additional space will be needed for flush installation.
SPECIFICATIONS
Overall Width 26-3/4" (68.0 cm)
Overall Height 28-13/16" (72.2 cm)
Overall Depth
Including Handle 26-5/8" (67.6 cm)
Oven Door Clearance 20-9/16" (52.2 cm)
Overall Oven
Interior Capacity 4.3 cu. ft. (121.8 liters)
Oven Interior Dimensions
(W x H x D)
21-1/2" x 17-1/4" x 20"
(54.6 x 43.8 x 50.8 cm)
Minimum Cabinet Width* 27" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support 220 lbs. (99 kg)
Cutout Width* 25" (63.5 cm) Min
25-1/4" (64.1 cm) Max
Cutout Height* 27-5/8" (70.2 cm) Min
28-1/8" (71.4 cm) Max
Cutout Depth* 23-1/2" (59.7 cm) Min
Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A
Conduit Length 40" (72" available special
order: WB18T10398)
Electrical Rating 2.7 kW at 208V
3.6 kW at 240V
Shipping Weight 140 lbs. (64 kg)
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required.
An individual properly grounded branch
circuit or circuit breaker is required. Hardware
junction box is required for built-in product.
OVERALL DIMENSIONS

MONOGRAM 27" BUILT-IN SINGLE OVEN ZEK7000SHSS
Product Specification Revised 9/16
3/4" thick
platform
required
27 1/4" (69.2) flush inset width
with 1/4" (0.6) reveals
27 1/4" (69.2)
1 5/16"
(3.3)
27 5/8"
(70 .2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
6 1/8"
(15.6)
8 3/4"
(22.2)
25" (63.5)
cutout width
1 1/8"
(2.9)
Side cleats
7/8"
(2.2)
Top cleat
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
29 1/16"
(73.8)
Flush inset
height with
1/8" (0.3)
reveals
3/4"
(1.9)
6 1/8"
(15.6)
3
(7.6)
8 3/4"
(22.2)
25" (63.5)
min cutout width
23 1/2"
(59.7) min cutout depth
27 5/8"
(70.2)
31 1/4"
(79.4) min 24 13/16"
(63.0)
cutout depth
24 13/16" (63.0)
cutout depth
23 1/2" (59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
ZEK7000SHSS
ELEC.
ELEC.
3/4" thick
platform
required
27 1/4" (69.2) flush inset width
with 1/4" (0.6) reveals
27 1/4" (69.2)
1 5/16"
(3.3)
27 5/8"
(70 .2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
6 1/8"
(15.6)
8 3/4"
(22.2)
25" (63.5)
cutout width
1 3/16"
(3.0)
Side cleats
7/8"
(2.2)
Top cleat
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
29 1/16"
(73.8)
Flush inset
height with
1/8" (0.3)
reveals
3/4"
(1.9)
6 1/8"
(15.6)
3
(7.6)
8 3/4"
(22.2)
25" (63.5)
min cutout width
23 1/2"
(59.7) min cutout depth
27 5/8"
(70.2)
31 1/4"
(79.4) min 24 13/16"
(63.0)
cutout depth
24 13/16" (63.0)
cutout depth
23 1/2" (59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
ZEK7000SHSS
ELEC.
ELEC.
WALL INSTALLATION
UNDERCOUNTER INSTALLATION
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
D
E
CCC
B
A
F
C
B
ABased on a user height
of 5' 6" to 5' 10"
BJunction box location
(May also be located
in adjacent cabinet.)
CPlatform must be
able to support 220 lbs
(99 kg)
DCabinet surfaces must
be an appearance
finished surface for
flush installation.
ECleats may be visible
and should be finished
to match cabinetry.
FMinimum 31 1/4" from
the top surface of the
countertop to the top
surface of the wall
oven support platform
when installed beneath
a certified cooktop.
NOTES

MONOGRAM 27" BUILT-IN SINGLE OVEN ZEK7000SHSS
Product Specification Revised 9/16
2" (5.1) min
2 1/2"
(6.4) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4)
27 5/8"
(70.2)
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC.
wall oven ELEC.
cooktop
GAS ELEC.
Wall oven
ZEK7000SHSS
2" (5.1) min
2 1/2"
(6.4) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4)
27 5/8"
(70.2)
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC.
wall oven ELEC.
cooktop
GAS ELEC.
Wall oven
ZEK7000SHSS
NOTES
INSTALLATION WITH
ADVANTIUM AND
WARMING DRAWER
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
SIDE BY SIDE INSTALLATION
C
I
H
L
J
K
E
F
J
ADimensions per Advantium
or Microwave Oven
requirements
BDimension per Warming
Drawer requirements
CNote this oven is only
approved to be installed
under specific models as
labeled on this unit.
DSupport platform made
of 3/4" (1.9 cm) wood is
required. Must be capable
of supporting 220 lbs (99
kg). Support Platform base
to be same height as toe
kick.
EJunction box location
for wall oven. (May also
be located in adjacent
cabinet).
FGas regulator and electric
connections for cooktops
must be located in an
adjacent accessible location
to the right
GTop and/or side fillers
may be necessary if unit
is positioned between
existing cabinets. Be sure
they are attached securely,
since they will anchor the
oven in the cabinet.
HFor flush oven installations,
the cooktop cutout must
be set back 2 1/2" (6.4 cm)
plus the cleat setback.
IDimension varies
based on model.
example:
ZGU384 4 5/16"
(11.0 cm)
(from wall)
JDimension varies
based on model.
example:
ZGU384 12 1/16"
(30.6 cm)
(centerline)
KDimension varies
based on model.
example:
ZGU384 5"
(12.7 cm)
LFrom the top surface of
the countertop to the top
surface of the wall oven
support platform
UNDER COOKTOP INSTALLATION
23 1/2" (59.7) min
cutout depth
27 1/4"
(69.2)
32 1/2" (82.6)
Recommended and
16 1/4" (41.3) min
Cutout location
from floor
2"
(5.1) min
2"
(5.1) min
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ZET1FHSS
A
B
D

MONOGRAM 27" BUILT-IN SINGLE OVEN ZEK7000SHSS
Product Specification Revised 9/16
R
GLASS TOUCH CONTROLS
Allow you to adjust oven settings, with little eort
TRUE EUROPEAN CONVECTION
Achieve delicious results from a third heating
element and fan combination
4.3 CU. FT. CAPACITY
Accommodates even the largest meals
TEN-PASS BAKE ELEMENT
Covers more surface area for more even
baking results
SELF-CLEAN, HEAVY-DUTY ROLLER RACKS
Glide open smoothly to simplify loading and
unloading
EIGHT-PASS DUAL BROIL ELEMENT
Provides complete coverage and even browning,
even for large dishes
WIFI CONNECT
Allows you to control oven functions from anywhere
inside or even outside your home, using your
smartphone or other web-enabled mobile device
FEATURES AND BENEFITS