Monoprice Commercial Series User manual

Commercial Series
3x1 Menu Board Ceiling Mount for Displays between 32in to 65in,
VESA Patterns up to 600x400
P/N 39664
Installation Guide
SAFETY GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please
keep this manual in a safe place for future reference.
• Do not exceed the rated weight limit. Doing so can cause the mount to fail, resulting in equipment damage and/or severe
personal injury.
• Ensure that the structure to which this mount will be installed is capable of supporting at least four times the total weight
of the mount and any connected displays.
• Use the supplied mounting screws. Tighten the screws using the appropriate tool, but take care not to over-tighten them.
• This device is intended for indoor use only.
• This device contains small parts that could pose a choking hazard to small children. Keep this device and its spare parts out
of reach of children.
• Inspect the installation at least once every three months to ensure that it is secure and safe to use.
• Please take an inventory of the package contents to ensure you have all the items shown in the Parts List. If anything is
missing or damaged, please contact Monoprice Customer Service for a replacement.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery
experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You
can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or
via email at [email protected]. Check the website for support times and links

PRODUCT DIMENSIONS
PACKAGE CONTENTS
REQUIRED TOOLS
Packet 1 Packet 2
Packet 3
X1 X3
M5X15 M6X15 M8X15 6X 6.2X1.5
X4 X4 X4
A1 A2 A3 A4
X4
X3 X1
X2
X8 X8
3mm
M5x8
X8
X4 X2 X4X2
D4 D5 D6 D7 D10 D11
X2X2 X6
D8 D9
X2 X12 X6
D12 D13
580(Min)~800(Max)
3480
480 1000
6°
5°
10°
15°
55
Wood Bit
Stud Finder
Socket Set Pencil Level DrillMeasuring Tape Masonry Bit
HammerPhillips Screwdriver
32"
78"
3
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery
experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You
can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.comor
via email at [email protected] . Check the website for support times and links
1000(x3)
480(x1)
6
6

Installation
BRICK OR CONCRETE
C6
C5
C2
6mm
B5
C1
C2
B4
C4
WOOD
C5
C2
1 2a
2b 3
4 5
D5
B6
1000
1000
D12

6 7
8
9
Repeat the steps connecting the ‘480’ to the remaining ‘1000’ piece and the 2 already attached ‘1000’ parts.
1000
1000
D10
3mm 3mm
D10
D12
B6
1000mm
1000mm
1000mm
480mm

10
11 14
15 16
5mm
6mm 6mm
B2
B1
C4
B4
D11 C3
B5
A1/A2/A3
A4
Tighten

17
5°
10°
10°
15°
13
05
10
15
05
10
15
05
10
15
Tighten

1 2
2 3
Push in
Wire