Monoprice 13706 User manual

1
MONOPRICE
Select 5.25-inch 2-Way Bookshelf Speakers
MODEL 13706
Quick Install Guide
SAFETY WARNINGS AND OPERATING GUIDELINES
These speakers are for indoor use only. Do not expose these speakers to water or
moisture of any kind.
If operating these speakers in a humid environment, ensure that no condensation
occurs. Condensation can cause damage to the speaker cones.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents.
For stubborn deposits, moisten the cloth with warm water.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your order,
please give us an opportunity to make it right. You can contact a Monoprice Customer Service
representative through the Live Chat link on our website www.monoprice.com during normal
business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-6pm PT) or via email at
[email protected]
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed below.
If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
2x 5.25-inch bookshelf speakers
8x Adhesive rubber feet
INSTALLATION
For the best quality sound, the speakers should be positioned symmetrical to your
listening location and spaced at least 6 inches from the wall.
Ensure that any mounting location is capable of supporting the full weight of the
speakers.
For best results, the speakers should be mounted in such a way that the tweeters are at
ear level when seated in your listening position.

2
Use the included adhesive rubber feet if placing the speakers on a flat surface, such as
a shelf or table.
CONNECTION
Ensure your amplifier is powered OFF before making any connections.
For best results, use the thickest gauge speaker wire that can be supported by the
binding posts on your amplifier and these speaker.
It is recommended to use banana or pin plugs to make the connections.
For best results, ensure that both speaker wires are the same length. This ensures that
the overall impedance is the same for each speaker.
Ensure that there are no stray wire strands at the connection points.
Take care to maintain proper polarity in the speaker connections. Use speaker wire with
clear polarity markings.
Ensure that your amplifier is stable down to 6 ohms impedance.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product recommendations.
If you ever need assistance with your new product, please come online to talk to one of our
friendly and knowledgeable Tech Support Associates. Technical support is available through the
online chat button on our website www.monoprice.com during regular business hours, 7 days
a week. You can also get assistance through email by sending a message to
[email protected]
SPECIFICATIONS
Model
13706
Speaker Type
2-way with rear port
Woofer Size
5.1"
Tweet Size
1"
Frequency Response
70Hz ~ 20kHz ±20%
Crossover Frequency
3.5kHz
Nominal Impedance
6 ohms
Maximum Input Power
75 watts
Sensitivity
83dB
Dimensions
9.8" x 6.1" x 10.9 (251 x 155 x 276 mm)
Weight (each)
8.7 lbs. (3.95 kg)