Monoprice 13264 User manual

MONOPRICE
Portable Mini-Melody Bluetooth Speaker
PID 13264
User's Manual

2
SAFETY WARNINGS AND GUIDELINES
This device is not waterproof. Do not expose it to water or moisture of any kind.
If using this device in a humid environment, ensure that no condensation occurs.
Condensation can damage the speaker driver and/or short the internal electronics.
Fully charge this device prior to use.
If left unused for a long period of time, the battery should be charged at least once
every three months to ensure that it remains capable of holding a full charge.
This device has no user serviceable parts. Do not open the case or otherwise
attempt to modify this device.
INTRODUCTION
Thank you for purchasing this Portable Mini Melody Bluetooth Speaker!
This compact speaker features a wireless Bluetooth connection with a range of up to 32
feet (10 meters). It also includes a physical 3.5mm wired connection for ultimate flexibility
and convenience. The built-in microphone allows you to use this as a speakerphone for
making and receiving telephone calls using your Bluetooth-enabled phone.
FEATURES
Wireless Bluetooth connection
Up to 32 feet (10 meters) wireless range
3.5mm auxiliary input
Built-in microphone for use as a speakerphone
Internal rechargeable battery

3
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
6pm PT) or via email at [email protected]
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x Portable Mini-Melody Bluetooth Speaker
1x Micro-USB charging cable
1x User's manual
PRODUCT OVERVIEW
1. Volume - button
2. Multifunction button
3. Volume + button
4. Microphone
5. Power switch
6. Micro-USB Charging port
7. 3.5mm AUX port

4
CHARGE LEVEL INDICATION
The LED indicator will begin flashing red when the battery charge level is low. When it
does, charge the speaker by following the instructions in the Charging section below.
Depending on your device, a battery level icon may appear on screen.
The icon will have a short, red bar when the charge level is low.
CHARGING
This speaker features a built-in battery, which can be charged from any USB power source.
Perform the following steps to charge the speaker's battery:
1. Plug the USB Micro-B end of the included charging cable into the Micro-USB
Charging port (6) on the speaker.
2. Plug the other end of the cable into a USB power source, such as a computer's USB
port or an AC adapter/wall charger.
3. The LED will change color while charging is in progress:
If the speaker is ON during charging and you are using a Bluetooth connection,
the LED will glow pink/purple while charging and then will return to the normal
blue color when charging is complete.
If the speaker is ON during charging and you are using a direct connection, the
LED will blink pink/purple while charging and then will return to the normal
blinking blue color when charging is complete.
If the speaker is OFF during charging, the LED will glow red while charging, then
will turn off when fully charged.
Note: The battery should be fully charged at least once every three months, even if
the speaker has gone unused during that time.

5
BLUETOOTH PAIRING
Perform the following steps to pair the speaker with your phone or other Bluetooth
device:
1. Slide the Power switch (5) to the ON position. The speaker will beep and the LED
indicator will begin to blink blue, indicating that the speaker is in Bluetooth Pairing
Mode.
Note: If the speaker is already paired to a device, the LED will instead glow blue
continuously. To unpair the speaker from the other device, press and hold the
Multifunction button (2) for about 3 seconds. The speaker will beep and the LED
will begin blinking blue, indicating that the speaker is ready to be paired with
another device.
2. Open the Bluetooth settings on your device and search for nearby Bluetooth
devices.
3. Locate and select the MP-13264 entry. If prompted for a passcode, enter 0000 (four
zeroes). The speaker will beep and the LED indicator will stop blinking and begin to
glow blue continuously.
PAIRING WITH ANOTHER DEVICE
Although the speaker can be paired with multiple devices, it can only be paired with one at
a time. Perform the following steps to pair the speaker with a different device:
1. Slide the Power switch (5) to the ON position.
2. Press and hold the Multifunction button (2) for about 3 seconds. The speaker will
beep and the LED will begin blinking blue, indicating that the speaker is ready to be
paired with another device.
3. Follow the instructions in the Bluetooth Pairing section above.

6
DIRECT CONNECTION
If you cannot use a Bluetooth connection, you can use the speaker for audio playback by
connecting it to your device using a 3.5mm stereo audio cable (not included). Perform the
following steps to make a direct connection:
1. Plug one end of a 3.5mm stereo audio cable (not
included) into the AUX port (7) on the speaker.
2. Plug the other end of the cable into the headphone
output jack on your audio device.
Note that when using a direct connection, the volume
control buttons on the speaker are non-operative. Use
the volume controls on your audio device to control the volume level.
TELEPHONE CALLS
If you are using a Bluetooth connection with your phone, the speaker can be used as a
speakerphone for incoming and outgoing calls.
Incoming Calls
When you receive an incoming call, audio playback will automatically pause. You will hear
your phone's normal ringtone and the speaker will beep to indicate that an incoming call
has been received.
To answer the call, press the Multifunction button (2) once.
To reject the call, press and hold the Multifunction button (2) for about 2
seconds.
Once the call has been completed, press the Multifunction button (2) once to
terminate the call. Audio playback will automatically resume.

7
Outgoing Calls
You can use the speaker as a speakerphone when initiating a telephone call.
Use your phone as normal to initiate the call.
Use the speaker and the built-in microphone as a speakerphone during the call.
Press the Multifunction button (2) once to terminate the call.
AUDIO PLAYBACK CONTROL
When using a Bluetooth connection, the following buttons control audio playback:
Volume - (1): Press to decrease the volume level.
Multifunction (2): Press to pause/resume playback.
Volume + (3): Press to increase the volume level.
TROUBLESHOOTING
Q1: I slide the Power switch to the ON position, but the LED remains off.
A1: Recharge the battery.
Q2: The volume is too low, even with the volume level set to maximum.
A2: Increase the volume level on your audio source device. For best results, set the volume
level on your source device to near maximum, then use the volume controls on the
speaker to adjust to a comfortable listening level.
Q3: The volume controls on the speaker have no effect.
A3: The volume controls on the speaker are non-operative when using a direct connection.
Switch to a Bluetooth connection to use the volume controls on the speaker.

8
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [e-mail]
REGULATORY COMPLIANCE
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the user’s
authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.

9
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the user’s
authority to operate this device.
This device complies with IC RSS-210. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
EU Conformity with Applicable Directives
This equipment complies with the essential requirements listed below:
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
R&TTE Directive 1999/5/EC
RoHS Directive 2011/65/EU
WEEE Directive 2011/65/EU
Packaging & Packaging Waste Directive 94/62/EC
Batteries Directive 2006/66/EC