Montesa COTA 4RT 260 2014 User manual

KIT RACE REPLICA
2014

3
32008 Montesa Honda, S.A.
E
COTA 4RT RACE REPLICA 2014 PART LIST
No DESCRIPTION REFERENCE
1 STAY FRONT FENDER + TUBE BRACKET 61110-REP-SOL
2 MUFFLER PROTECTOR 18347-REP-SOL
3 CLUTCH COVER PROTECTOR 11330-REP-SOL
4 CARBON FRONT FORK PROTECTOR (SET) 53211-REP-SOL
5 FOOTREST "HARD ROCK" 50645-REP-J00
6 EXHAUST PIPE PROTECTOR 18328-REP-SOL
COTA 4RT RACE REPLICA 2014 ADHESIVE LIST
No DESCRIPTION REFERENCE
7 RIMS STICKERS 87150-REP-J00
FRONT RIM STICKERS
REAR RIM STICKERS
8 HEADLIGHT STICKER 87144-REP-J20
9 CRANKCASE PROTECTOR STICKER 87146-REP-J20
10 SPONSOR STICKER ADHES-REP-004
"S3" STICKER
FORK RH STICKER
FORK LH STICKER
11 FUEL TANK STIKER ADHES-REP-005
- T. BOU STICKER
- T. FUJINAMI STICKER

4
4
E
2008 Montesa Honda, S.A.
COTA 4RT REPSOL 2014 PARTS
COTA 4RT REPSOL 2014 ADHESIVE
1
2
3
4
5
6
7
8
9
10
11

5
52008 Montesa Honda, S.A.
E
POSITION OF PARTS AND STICKERS ON 2014 REPSOL COTA 4RT
11
10
10
10
10
9
8
7
6
5
5
4
4
3
2
1
7
7
7

6
6
E
2008 Montesa Honda, S.A.
2014 HEADLIGHT KIT COMPONENTS
No DESCRIPTION REFERENCE
1HEADLIGHT ASSY. 61300-REP-J00
2- HEADLIGHT COVER 61310-REP-J00
3- HEADLIGHT SUPPORT 61315-REP-J00
4- VIS D3,9X10 90112-REP-J00
5- LAMP 34901-REP-J00
6- HEADLIGHT WIRING WITH SWITCH 32101-REP-J00
1
2
3
4
5
6

7
72008 Montesa Honda, S.A.
E
2014 HEADLIGHT KIT REPLACE-
MENT PROCEDURE
- Remove the rear fender.
Remove the top and side screws.
- Remove the fuel tank.
Remove the front screw.
Do not lift the tank.
- Remove the fuel injector holder.
- Disconnect the injector by pressing the
clips on the sides.

8
8
E
2008 Montesa Honda, S.A.
- Disconnect the suction hose from the
cylinder head.
Carefully lift the petrol tank, being careful
not to pull abruptly as the fuel hoses are
connected and could be damaged.
- Disconnect the fuel pump black connector
(2P).
- Remove the fuel tank.

9
92008 Montesa Honda, S.A.
E
- Remove the connectors from the protective
cable cover.
- Disconnect the 4P connector (a) from lights
installation.
- Remove the protective cover from the
muffler.
- Remove the exhaust pipe clamp.
- Remove the silencer attachment bolt (a).
- Remove the muffler.
a
a

10
10
E
2008 Montesa Honda, S.A.
- Loosen the filter casing intake flange.
- Remove and extract the filter casing.
- Remove the breather hose from the filter
casing.
- Disconnect the black connector (a) from
the front headlight cable.
- Disconnect the white connector (b) from
the headlight switch cable.
- Disconnect the connector (c) from the
speedometer (rear wheel speed sensor).
b
a
c