Mood Media Harmony K140A1 User manual
Quick Start Guide
Harmony
❶Connect
❷Listen
K140A1
Need Help? Call 800.345.5000 or visit moodmedia.com 2
❶The Harmony a/v player
❷Remote control (ProFusion or MVision version)
❸External power adapter for the Harmony
❹Ethernet cable (and HDMI cable, if applicable)
❺3.5mm TRRS to RCA audio cable
❻Window appliqué
❼This Quick Start Guide and other important information
about your Harmony device.
WHAT YOU WILL NEED
A working visual display and/or speaker system
An open/active broadband internet connection (Ethernet or
WiFi)
Optional: If you wish to access the Harmony’s local user
control page, a computer, phone or tablet with an Internet
browser and network access will be necessary
ProFusion | MVision
❶
Welcome!
Thank you for choosing Mood Media to provide your
audio/visual experience!
WHAT’S IN THE BOX?
❷
❹
❺
❸
3Harmony Quick Start Guide
Harmony
A QUICK LOOK AT…
THE FRONT
THE BACK
NOTE: Your Harmony device may be configured for music only. A video
display is not necessary to complete an audio only installation. Please
see the full Harmony User Guide in the Client Support Hub at
moodmedia.com for more detailed operating information.
Remote Control
Sensor
Digital | Analog
Video Outputs
Power Adapter Input
USB
Ports
Power, Ethernet and Play Status Lights
Ethernet
Port
Audio Outputs
Digital | Analog
Need Help? Call 800.345.5000 or visit moodmedia.com 4
Connect your Harmony device
❶Please refer to the Regulatory and Safety information sheet
included with your Harmony device before proceeding.
❷Adjust the volume on your display or speaker system down
completely (off). Then power off your system and old music player. You’ll
be prompted to increase the volume in step ❽.
❸Disconnect the power and remove all cables from the old player.
❹Remove the old player and its power supply.
❺Place your Harmony device in a manner that is consistent with the
safety instructions and that allows adequate ventilation space.
❻Connect the cables in this order:
A: The 3.5mm a/v plug to the Harmony A/V jack, then the color
coded (red and white) RCA connectors to the corresponding audio
zone(s) for your speaker/visual system. (note: yellow is for Composite
video).
B: The Ethernet cable to your Harmony and to your available
Ethernet port then, if applicable, the HDMI cable to your Harmony
device and to your display.
C: The 5.5mm plug of the external power adapter (use only the
power adapter provided with your Harmony device).
CAUTION: Certain parts may cause electrical shock or injury.
IMPORTANT: Please note these important operational
instructions and clarifications.
❻A
❻B
❻C
5Harmony Quick Start Guide
❼Plug the external power adapter into an ‘always on’ wall outlet.
Your Harmony device will now boot-up and if scheduled, will
automatically begin content playback.
No further action should be required.
If you need to access the local user control page, please refer to the full
User Guide available online in the Client Support Hub at
moodmedia.com or call us at 1.800.345.5000.
❽Turn on your visual display or speaker system and increase the
master volume in small increments until you reach your desired listening
level.
Please note that you may need to adjust your display or speaker volume
to match the level you are accustomed to. Due to normal differences
between any previous music player and your new Harmony device you
may need to try different volume settings. The volume on your Harmony
device is set to 100% from the factory, so adjust your display and/or
speaker system volumes slowly and carefully.
Congratulations! You should now be enjoying your content selections
on your Harmony device!
Please refer to the full online User Guide for more detailed operating
instructions. If you have any questions or comments, please call us toll-
free at 800.345.5000 or visit our Client Support Hub at moodmedia.com
NOTE: If a circuit breaker, wall switch or a timer controls the outlet you
are using please ensure it is always on. Improperly shutting down
electronic devices can cause premature failure.
Need Help? Call 800.345.5000 or visit moodmedia.com 6
Status Lights
Power Status:
Red = Power is available, but the Harmony device is off.
Green = The Harmony Device is on and active.
Ethernet Status:
Yellow = no Ethernet or WiFi connection.
Green = a valid Ethernet or WiFi connection is established.
Playback Status:
Red = Content is not playing.
Green = content is playing.
Reset button
On the back of the Harmony device, there is a small opening to access
the reset button. This button should only be accessed upon the advice of
a Mood representative.
NOTE: For a more detailed description about how Harmony can tell
you about its status by using these lights, please refer to the full online
User Guide for more detailed operating instructions. If you have any
questions or comments, please call us toll-free at 800.345.5000 or visit
our Client Support Hub at moodmedia.com
Page 1 Harmony - MAVPSG1 - Model K140 (A1;A2;L1;L2)
Regulatory and Safety Sheet
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
ATTENTION: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR!
NO USER SERVICEABLE PARTS INSIDE!
AU CUNE PIÈCE INTERNE RÉPARABLEPAR L’UTILISAT EUR!
This symbol is intended to inform users that certain parts may cause
electrical shock and injury.
Ce symbole est destiné à informer les utilisateurs que les pieces internes peuvent provoquer un choc
électrique et des blessures.
This symbol is intended to inform users of important operational
instructions and clarifications.
Ce symbole est destiné à informer les utilisateurs d’importantes instructions et clarifications
opérationnelles.
ATTENTION!
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
ATTENTION: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR!
NO USER SERVICEABLE PARTS INSIDE!
AU CUNE PIÈCE INTERNE RÉPARABLEPAR L’UTILISAT EUR!
This product was tested by an independent Nationally Recognized Testing Laboratory (NRTL).
Please refer to the ‘Safety Agency Listings’ for more detail.
Changes or modifications not expressly approved by the party responsible for
compliance will void the user’s authority to operate the equipment. Unauthorized
modifications place users at risk of injury to their person and/or damage to property.
CAUTION - READ
ME
Page 2 Harmony - MAVPSG1 - Model K140 (A1;A2;L1;L2)
Regulatory and Safety Sheet
WARNING!
To reduce the risk of fire, electric shock, or injury:
Pour réduire le risque d’incendies, de chocs électriques ou de blessures:
Do not use the Harmony device if it has been exposed to water.
N‘utilisez pas le Harmony s’il a été exposé à l’eau.
Do not use the Harmony device if it has been dropped or damaged.
N‘utilisez pas le Harmony s’il a chuté et a été endommagé.
Do not use the Harmony device with a damaged power cord.
N‘utilisez pas le Harmony avec un cordon d’alimentation endommagé.
Do not unplug power or audio connections by pulling on the cables.
Ne débranchez pas en tirant sur le cordon.
Do not restrict airflow by blocking or covering ventilation openings in the chassis cover
or insert objects into chassis ventilation openings.
Ne limitez pas le flux d’air en direction du boîtier en bloquant ou en insérant des objets
dans ses orifices de ventilation.
Do not use in environments with excessive heat, humidity, dust, or magnetic fields.
N‘utilisez pas dans des environnements en proie à une chaleur excessive, l’humidité,
aux champs magnétiques ou à la poussière.
Place the Harmony device only on a stable surface of sufficient size and strength
where it will not be exposed to excessive vibration.
Placez le Harmony uniquement sur une surface stable de dimension et de force
suffisantes où il ne sera pas exposé à des vibrations excessives.
Do not overload power outlets.
Ne surchargez pas les prises d’alimentation.
Route all cables safely. Do not place any items on or against the cables.
A cheminez tous les câbles en toute sécurité. Ne placez pas d’objets sur ou contre
les cables.
Do not allow children to operate without supervision.
Ne laissez pas les enfants utiliser l’appareil sans surveillance.
Use only attachments that are approved by Mood Media Corporation.
Utilisez uniquement des pièces approuvées par DMX, LLC.
Page 3 Harmony - MAVPSG1 - Model K140 (A1;A2;L1;L2)
Regulatory and Safety Sheet
NOTE-1: This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE-2: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protections against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case users will be required to correct the interference at their own expense.
Safety Agency Listings
This product was tested and was found to be fully compliant with international product safety and
electromagnetic standards using the hazards based approaches introduced by the recently
implemented IEC-62368-1:2018 Standard and its international derivatives.
This product was tested and found to be fully compliant with; FCC Part
15, Subpart B / Class A; CE-RED; cETLus – with ETL CB Scheme;
CCC;RoHS 2.0 and WEEE requirements
Contact Mood
Worldwide Customer Support Centers
United States: +1 800 345 5000
Africa: + 27 11 780 3000
Brazil: + 55.11. 3457.0654
Canada: +1 800 350 0369
or on the web at moodmedia.com
© Mood Media 2019. All rights reserved.
DMX, LLC is a Mood Media company.
All other trademarks and logos are the property of their respective owners.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Table of contents
Other Mood Media Media Player manuals
