Mooer Micro Series User manual

Main Features
1.True bypass footswitch: Engages and
disengages the effect. Depressing the
footswitch for more than 2 seconds will
engage Tap Tempo functionality and the
LED will flash. Tap the footswitch two or
more times to synchronize the delay to
your desired tempo. The pedal will revert
back to normal operation after 5 seconds.
2.LED:Displays the on/off status of the
pedal.Provides instant access to Tap
Tempo. Tap the LED 2 or more times to
synchronize the delay to your desired
tempo.
3.LEVEL/MIX control:Adjusts volume of
delay and wet/dry mix of reverb.
4.TIME/TONE: Adjusts Delay time and
Reverb tonality.
5.Controls switch:Depicts which effect
the controls are adjusting. Switch up to
adjust Delay parameters switch down to
adjust reverb parameters.
6.FB/DECAY:Adjusts Delay feedback
and Reverb decay.
7. DC in power jack: Input for power supply, use a 9V DC regulated power supply
, center pin negative.
8. Input jack : 1/4” audio jack for connecting to the input device or instrument.
9. Output jack : 1/4” audio jack, effect output for connection to amp or other
devices.
Precautions
Pedal layout
Digital Delay& Reverb Pedal
PLEASE READ CAREFULLY BEFORE PROCEEDING
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V DC, ,center
negative. Please do not use an AC adapter which supplies more than 9V DC.
Unplug the AC power adapter when not in use or during electrical storms.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Connections
Always turn off the power and all other equipment before connecting or
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessively dusty or dirty location
Strong vibration or shock
Extreme temperature or humidity
High humidity or moisture
Heat sources
EchoVerb
Part No:620010602
High Quality Reverb and Digital Delay in one micro pedal
Delay controls: TIME, FEEDBACK and LEVEL
Reverb controls: TONE, DECAY and MIX
Tap tempo functionality
Small and compact size
True bypass
Modes:Delay and reverb effects with tap tempo functionality.
Input:1/4” mono audio jack.(Impedance: 470k Ohms)
Output:1/4” mono audio jack(mpedance: 100 Ohms)
Power requirements:AC adapter 9V DC ,center negative.
Highly recommend to use Mooer Micro Power.
Current Draw:160mA
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:146g
Accessories:Owner ’s Manual
*Notes：Any specification’s update will not be amended in this manual.
DC IN
7
46
9
1
3
2
5
TIME TON E FB DEC AY
REVE RB
DELAY
EchoVerb
LEVE L MI X
8

延迟混响单块
连接
连接设备或断开连接前，请务必关闭电源及其他设备，这将有助于避免故障和损害其他设
备。另外，要确保移动本机前断开所有的连接线和电源线。
放置场所
为防止变形、变色，及其他严重损坏，请避免以下情况：
•阳光直射 •靠近热源
•磁场 •高温潮湿
•多尘或不洁的地方 •湿度较大
•强烈震动或摇晃
电器干扰
在使用本机时，收音机和电视机可能会造成干扰。使用本机时要远离收音机和电视机。
清洁
请使用干燥柔软的布清洁本机。如有必要，可用稍微湿润的布拭擦。切勿使用粗糙的清洁
粉、酒精、涂料稀释剂、蜡、溶剂、清洁剂及化学试剂等浸渍抹布。
操作
请勿暴力使用开关及控制元件。
请勿让纸屑、金属制品及其他物体落入机内。
注意不要摔落，不要使其受到冲击及过度压力。

*免责声明：参数更新恕不另行通知
电源供应
请使用正确的交流电源插座连接电源变压器。
请使用内负外正 的9V（±10%）电源变压器，否则将会导致设备损坏，着火
或者其他问题。不使用时或雷雨天时请拔下电源。
Part No:620010602
EchoVerb
两种调试模式：延时和混响。可独立调节，并且效果可同时使用
DELAY档对应旋钮调节为：TIME, FB(FEEDBACK), LEVEL
REVERB档对应旋钮调节为：TONE, DECAY, MIX
LED按键灯调节TAP TEMPO功能
脚钉控制TAP TEMPO功能
全金属MINI外壳
9V电源供电
DC IN
7
46
9
1
3
2
5
TIME TON E FB DEC AY
REVE RB
DELAY
EchoVerb
LEVE L MI X
8
1.TRUE BYPASS 踩钉：轻踩一下为效果
器开关状态；长踩2秒进入TAP TEMPO
模式，轻踩踩钉两下可根据踩下的速度
调节延时的时间，5秒后自动退出TAP
TEMPO模式。
2.LED灯：LED提示效果器工作状态，附带
TAP TEMPO功能，轻按两下可根据按下
速度调节延时的时间。
3.LEVEL/MIX旋钮：在DELAY档位下，
调节为延时效果的音量；在REVERB档位
下，调节为混响效果的干湿比例。
4.TIME/TONE旋钮：在DELAY档位下，
调节为延时效果的时间值；在REVERB档
位下，调节为混响效果的明暗度。
5.两档拨档：可选择当前调节模式为
DELAY还是REVERB，且切换档位时，之
前档位调节位置将会储存。
6.FEEDBCAK/DECAY旋钮：在DELAY档
位下，调节为延时效果的重复次数；在
REVERB档位下，调节为混响效果的深度。
8.INPUT输入:1/4”单声道音频接口，连接输入信号。
9.OUTPUT输出:1/4”单声道音频接口，连接输出信号。
7.DC9V:使用9V直流变压器（内负外正 ，160mA）
1．连接电源（9V，内负外正 ，160mA）
2．连接吉他信号输入至EchoVerb的INPUT接口，OUTPUT接口连接至音箱输入接口
3．踩下踩钉开启效果器，通过提供的旋钮调节对应参数获得需要的效果音色
工作模式：延时混响效果，可独立调节参数，附带TAP TEMPO功能。
输入：1/4”单声道音频接口（阻抗470k Ohms）
输出：1/4”单声道音频接口（阻抗100 Ohms）
电源供给：9V直流变压器（内负外正），推荐使用Mooer Micro Power
工作电流：160mA
尺寸：93.5mm(D) x 42mm(W) x 52mm(H)
重量：146g
附件：用户手册