Mooer Red Kid User manual

Main Features
Overview
Precautions
Talk Wah Pedal
Red Kid is a vocal simulation pedal which lies somewhere
between a wah wah and a talk box. It clearly replicates 2
different vocal sounds like you may expect to hear from a
talkbox or vocoder device. Operated like a traditional wah
pedal it's super expressive and there's no need for messing
about with microphones or rubber hoses. Just pop it into
your effects chain like any other pedal. Red Kid comes
equipped with MOOER's unique pressure sensing
footswitch for instant operation. Making your guitar talk
has never been so simple!!!!
Talk wah replicates the tonal qualities of the human
voice and can bring new inspiration to your music
Equipped with MOOER's unique pressure sensing
footswitch
Simulates 2 different vocal sounds
True Bypass switching
Rugged metal housing
Power Supply
Connections
Always turn off the power of this and all other equipment
before connecting or disconnecting, this will help prevent
malfunction and / or damage to other devices. Also make
sure to disconnect all connection cables and the power cord
before moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten
the cloth. Do not use abrasive cleanser, cleaning alcohol,
paint thinners, wax, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception
interference. Operate this unit at a suitable distance from
radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Heat sources
Strong vibrations or shocks
Excessive dusty or dirty location
Extreme temperature or humidity
High humidity or moisture
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
FCC certification
Please Read Carefully Before Proceeding
Please connect the designated AC adapter to an AC outlet
of the correct voltage. Please be sure to use only an AC
adapter which supplies 9V DC(±10%), , center
negative. Unplug the AC power adapter when not in use or
during electrical storms.

Specifications
*Notes: Any specification’s update will not be amended in
this manual.
Modes and Switching
Part No:620010618
1. LED：
Indicates the on/off status of the effect pedal
2. Input jack :
1/4” audio jack for connecting to the input
device or instrument.
3. Output jack :
1/4” audio jack, effect output for connection
to amp or other devices
4. DC in power jack:
Input for power supply, use a 9V DC regulated
power supply , center pin negative.
5. Pedal extension rings:
Can be extended to increase pedestal surface
area and increase comfort
6. Pressure sensing pads：
Activates the effect by detecting the presence
of your foot.Front sensing pad is used to change
Effect mode. Rear sensing pad is used to change
switching mode.
7. Expression Pedal:
Controls vocal sweep of the effect
Press and hold the toe pressure sensing pad while the
pedal is connected to power
Disconnect the power whilst continuing to hold the
Reconnect power
TALK MODES
The RED KID has two different TALK modes, each with a
different vocal sound.To change TALK mode:
The LED's will flash BLUE to confirm the mode has
changed. Flashing once means mode
1, flashing twice means mode
2. Release the pressure sensing pad to resume operation
RED KID has 3 different types of switching.
1.Touch the pressure sensing pads with your foot to turn on
the effect. Release your foot from the pedal to turn off the
effect
2.Double tap the pressure sensing pads to turn on the effect.
The effect will remain on untill you double tap the
pressure sensing pads for a second time
3.In this switching mode you can use both techniques
mentioned above for switching the effect on and off
SWITCHING MODES
Press and hold the heel pressure sensing pad while the
pedal is connected to power
Disconnect the power whilst continuing to hold the
sensing pad
Reconnect power
To change switching mode:
The LED's will flash RED to confirm the mode has changed.
Flashing once means mode
1, flashing twice means mode
2, flashing three times means mode
3. Release the pressure sensing pad to resume operation.
Input：1/4” mono audio jack.（Impedance: 1M Ohms）
Output：1/4” mono audio jack（Impedance: 100 Ohms）
Power requirements: AC adapter 9V DC , center
negative. Highly recommend to use Mooer Micro Power.
Cur rent Draw：130mA
Dimensions：128mm(D) x 55mm(W) x 48mm(H)
Weight：460g
Accessories：Owner’s Manual
2
1
3
4
56
1
7
Pedal layout