Mooer MOD FACTORY PRO User manual


1、A.SPEED
Adjusts the rate of MODE A
2、A.DEPTH
Adjusts the depth/mix of MODE A
11
8 9
10
PRESE T ON/OFF
16
15
10
2 Independ en t pr oc es sing modules co nt ai ning a
total of 16 modulation e ff ec ts
Adjustab le s ig nal chain routing
Sto re and recal l up to 4 us er p re se ts
Tap Tempo fu nc ti onality
Expression ped al e xp an da bility
Leslie s ty le A CCELERATION pedal
True s te re o ou tp ut s
A.SP EED A.DE PTH A. CONT ROL B.S PEED B.D EPTH B .CON TROL
Step-p h
Auto-w ah
Vibrat o
A B
B A
TAP
TAP
Hold for
ACCEL
Hold for
21
INP UT EX P
DC 9V 30 0mA
20 19 18 17
13 14
12
Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Strongly vibrating or shakin
Place the place
Direct sunlight
Magnetic field
Dusty or unclean place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Near heat source
High temperature and humidity
Humidity is large
Precautions
Connections
Before connecting the device or disconnecting it, be sure to turn off t he p ower
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
before moving the unit.
Clean
Please use a dry, so ft c lo th t o cl ea n th e un it . If n ec es sa ry, w ip e wi th
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Main Features 3、A.CONTROL
Adjusts various effe ct p ar am et er s of M OD E A
4、B.SPEED
Adjusts the rate of MODE B
5、B.DEPTH
Adjusts the depth/mix of MODE B
6、B.CONTROL
Adjusts various effe ct p ar am et er s of M OD E B
7、MODE A
Selects the eff ec t ty pe f or M OD E A
8、ROUTING SWITCH
Selects the internal signal chain routing (see ROUTING section of this manual)
9、STO RE
Used for saving presets (see USING PRESETS section of this manual)
10、
Selects the eff ec t ty pe f or M OD E B
11、
Displays the currently selected Preset
12、
Thi s LE D wi ll i ll um in at e re d wh en t he P RE SE T FO OT SW IT CH i s co nt ro ll in g TAP TEMPO
13、
Displays the current speed of the modulation rate
14、
Displays the ON/OFF status of the pedal
15、
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
of the modulation rate
16、
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effe ct a cc el er at io n
17、DC IN
Connect to a 9VDC power source
18、RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BY PAS S
19、LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TR UE B YPA SS
20、EXP
Connect to an external expression pedal using a 1/4” TR S st er eo j ac k ca bl e
21、INPUT
Connect to the output of your instrument using a standard 1/4” jack cable
Pedal Layout
MODE B
PRESET STATUS L ED
TAP TE MP O LE D
EFFECT SPEED LED
ON/OFF LED
PRESET
ON/OFF
DUAL EN GINE M ODUL ATION P E DA L


1、A.SPEED
Adjusts the rate of MODE A
2、A.DEPTH
Adjusts the depth/mix of MODE A
11
8 9
10
PRESE T ON/OFF
16
15
10
2 Independ en t pr oc es sing modules co nt ai ning a
total of 16 modulation e ff ec ts
Adjustab le s ig nal chain routing
Sto re and recal l up to 4 us er p re se ts
Tap Tempo fu nc ti onality
Expression ped al e xp an da bility
Leslie s ty le A CCELERATION pedal
True s te re o ou tp ut s
A.SP EED A.DE PTH A. CONT ROL B.S PEED B.D EPTH B .CON TROL
Step-p h
Auto-w ah
Vibrat o
A B
B A
TAP
TAP
Hold for
ACCEL
Hold for
21
INP UT EX P
DC 9V 30 0mA
20 19 18 17
13 14
12
Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Strongly vibrating or shakin
Place the place
Direct sunlight
Magnetic field
Dusty or unclean place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Near heat source
High temperature and humidity
Humidity is large
Precautions
Connections
Before connecting the device or disconnecting it, be sure to turn off t he p ower
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
before moving the unit.
Clean
Please use a dry, so ft c lo th t o cl ea n th e un it . If n ec es sa ry, w ip e wi th
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Main Features 3、A.CONTROL
Adjusts various effe ct p ar am et er s of M OD E A
4、B.SPEED
Adjusts the rate of MODE B
5、B.DEPTH
Adjusts the depth/mix of MODE B
6、B.CONTROL
Adjusts various effe ct p ar am et er s of M OD E B
7、MODE A
Selects the eff ec t ty pe f or M OD E A
8、ROUTING SWITCH
Selects the internal signal chain routing (see ROUTING section of this manual)
9、STO RE
Used for saving presets (see USING PRESETS section of this manual)
10、
Selects the eff ec t ty pe f or M OD E B
11、
Displays the currently selected Preset
12、
Thi s LE D wi ll i ll um in at e re d wh en t he P RE SE T FO OT SW IT CH i s co nt ro ll in g TAP TEMPO
13、
Displays the current speed of the modulation rate
14、
Displays the ON/OFF status of the pedal
15、
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
of the modulation rate
16、
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effe ct a cc el er at io n
17、DC IN
Connect to a 9VDC power source
18、RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BY PAS S
19、LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TR UE B YPA SS
20、EXP
Connect to an external expression pedal using a 1/4” TR S st er eo j ac k ca bl e
21、INPUT
Connect to the output of your instrument using a standard 1/4” jack cable
Pedal Layout
MODE B
PRESET STATUS L ED
TAP TE MP O LE D
EFFECT SPEED LED
ON/OFF LED
PRESET
ON/OFF
DUAL EN GINE M ODUL ATION P E DA L


1、A.SPEED
Adjusts the rate of MODE A
2、A.DEPTH
Adjusts the depth/mix of MODE A
11
8 9
10
PRESE T ON/OFF
16
15
10
2 Independ en t pr oc es sing modules co nt ai ning a
total of 16 modulation e ff ec ts
Adjustab le s ig nal chain routing
Sto re and recal l up to 4 us er p re se ts
Tap Tempo fu nc ti onality
Expression ped al e xp an da bility
Leslie s ty le A CCELERATION pedal
True s te re o ou tp ut s
A.SP EED A.DE PTH A. CONT ROL B.S PEED B.D EPTH B .CON TROL
Step-p h
Auto-w ah
Vibrat o
A B
B A
TAP
TAP
Hold for
ACCEL
Hold for
21
INP UT EX P
DC 9V 30 0mA
20 19 18 17
13 14
12
Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Strongly vibrating or shakin
Place the place
Direct sunlight
Magnetic field
Dusty or unclean place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Near heat source
High temperature and humidity
Humidity is large
Precautions
Connections
Before connecting the device or disconnecting it, be sure to turn off t he p ower
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
before moving the unit.
Clean
Please use a dry, so ft c lo th t o cl ea n th e un it . If n ec es sa ry, w ip e wi th
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Main Features 3、A.CONTROL
Adjusts various effe ct p ar am et er s of M OD E A
4、B.SPEED
Adjusts the rate of MODE B
5、B.DEPTH
Adjusts the depth/mix of MODE B
6、B.CONTROL
Adjusts various effe ct p ar am et er s of M OD E B
7、MODE A
Selects the eff ec t ty pe f or M OD E A
8、ROUTING SWITCH
Selects the internal signal chain routing (see ROUTING section of this manual)
9、STO RE
Used for saving presets (see USING PRESETS section of this manual)
10、
Selects the eff ec t ty pe f or M OD E B
11、
Displays the currently selected Preset
12、
Thi s LE D wi ll i ll um in at e re d wh en t he P RE SE T FO OT SW IT CH i s co nt ro ll in g TAP TEMPO
13、
Displays the current speed of the modulation rate
14、
Displays the ON/OFF status of the pedal
15、
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
of the modulation rate
16、
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effe ct a cc el er at io n
17、DC IN
Connect to a 9VDC power source
18、RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BY PAS S
19、LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TR UE B YPA SS
20、EXP
Connect to an external expression pedal using a 1/4” TR S st er eo j ac k ca bl e
21、INPUT
Connect to the output of your instrument using a standard 1/4” jack cable
Pedal Layout
MODE B
PRESET STATUS L ED
TAP TE MP O LE D
EFFECT SPEED LED
ON/OFF LED
PRESET
ON/OFF
DUAL EN GINE M ODUL ATION P E DA L


1、A.SPEED
Adjusts the rate of MODE A
2、A.DEPTH
Adjusts the depth/mix of MODE A
11
8 9
10
PRESE T ON/OFF
16
15
10
2 Independ en t pr oc es sing modules co nt ai ning a
total of 16 modulation e ff ec ts
Adjustab le s ig nal chain routing
Sto re and recal l up to 4 us er p re se ts
Tap Tempo fu nc ti onality
Expression ped al e xp an da bility
Leslie s ty le A CCELERATION pedal
True s te re o ou tp ut s
A.SP EED A.DE PTH A. CONT ROL B.S PEED B.D EPTH B .CON TROL
Step-p h
Auto-w ah
Vibrat o
A B
B A
TAP
TAP
Hold for
ACCEL
Hold for
21
INP UT EX P
DC 9V 30 0mA
20 19 18 17
13 14
12
Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Strongly vibrating or shakin
Place the place
Direct sunlight
Magnetic field
Dusty or unclean place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Near heat source
High temperature and humidity
Humidity is large
Precautions
Connections
Before connecting the device or disconnecting it, be sure to turn off t he p ower
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
before moving the unit.
Clean
Please use a dry, so ft c lo th t o cl ea n th e un it . If n ec es sa ry, w ip e wi th
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Main Features 3、A.CONTROL
Adjusts various effe ct p ar am et er s of M OD E A
4、B.SPEED
Adjusts the rate of MODE B
5、B.DEPTH
Adjusts the depth/mix of MODE B
6、B.CONTROL
Adjusts various effe ct p ar am et er s of M OD E B
7、MODE A
Selects the eff ec t ty pe f or M OD E A
8、ROUTING SWITCH
Selects the internal signal chain routing (see ROUTING section of this manual)
9、STO RE
Used for saving presets (see USING PRESETS section of this manual)
10、
Selects the eff ec t ty pe f or M OD E B
11、
Displays the currently selected Preset
12、
Thi s LE D wi ll i ll um in at e re d wh en t he P RE SE T FO OT SW IT CH i s co nt ro ll in g TAP TEMPO
13、
Displays the current speed of the modulation rate
14、
Displays the ON/OFF status of the pedal
15、
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
of the modulation rate
16、
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effe ct a cc el er at io n
17、DC IN
Connect to a 9VDC power source
18、RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BY PAS S
19、LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TR UE B YPA SS
20、EXP
Connect to an external expression pedal using a 1/4” TR S st er eo j ac k ca bl e
21、INPUT
Connect to the output of your instrument using a standard 1/4” jack cable
Pedal Layout
MODE B
PRESET STATUS L ED
TAP TE MP O LE D
EFFECT SPEED LED
ON/OFF LED
PRESET
ON/OFF
DUAL EN GINE M ODUL ATION P E DA L


1、A.SPEED
Adjusts the rate of MODE A
2、A.DEPTH
Adjusts the depth/mix of MODE A
11
8 9
10
PRESE T ON/OFF
16
15
10
2 Independ en t pr oc es sing modules co nt ai ning a
total of 16 modulation e ff ec ts
Adjustab le s ig nal chain routing
Sto re and recal l up to 4 us er p re se ts
Tap Tempo fu nc ti onality
Expression ped al e xp an da bility
Leslie s ty le A CCELERATION pedal
True s te re o ou tp ut s
A.SP EED A.DE PTH A. CONT ROL B.S PEED B.D EPTH B .CON TROL
Step-p h
Auto-w ah
Vibrat o
A B
B A
TAP
TAP
Hold for
ACCEL
Hold for
21
INP UT EX P
DC 9V 30 0mA
20 19 18 17
13 14
12
Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Strongly vibrating or shakin
Place the place
Direct sunlight
Magnetic field
Dusty or unclean place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Near heat source
High temperature and humidity
Humidity is large
Precautions
Connections
Before connecting the device or disconnecting it, be sure to turn off t he p ower
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
before moving the unit.
Clean
Please use a dry, so ft c lo th t o cl ea n th e un it . If n ec es sa ry, w ip e wi th
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Main Features 3、A.CONTROL
Adjusts various effe ct p ar am et er s of M OD E A
4、B.SPEED
Adjusts the rate of MODE B
5、B.DEPTH
Adjusts the depth/mix of MODE B
6、B.CONTROL
Adjusts various effe ct p ar am et er s of M OD E B
7、MODE A
Selects the eff ec t ty pe f or M OD E A
8、ROUTING SWITCH
Selects the internal signal chain routing (see ROUTING section of this manual)
9、STO RE
Used for saving presets (see USING PRESETS section of this manual)
10、
Selects the eff ec t ty pe f or M OD E B
11、
Displays the currently selected Preset
12、
Thi s LE D wi ll i ll um in at e re d wh en t he P RE SE T FO OT SW IT CH i s co nt ro ll in g TAP TEMPO
13、
Displays the current speed of the modulation rate
14、
Displays the ON/OFF status of the pedal
15、
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
of the modulation rate
16、
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effe ct a cc el er at io n
17、DC IN
Connect to a 9VDC power source
18、RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BY PAS S
19、LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TR UE B YPA SS
20、EXP
Connect to an external expression pedal using a 1/4” TR S st er eo j ac k ca bl e
21、INPUT
Connect to the output of your instrument using a standard 1/4” jack cable
Pedal Layout
MODE B
PRESET STATUS L ED
TAP TE MP O LE D
EFFECT SPEED LED
ON/OFF LED
PRESET
ON/OFF
DUAL EN GINE M ODUL ATION P E DA L

Pa rt N o:6 20 0 10 64 0
A.S PEE D A.D EPT H A. CON TRO L B. SPE ED B. DEP TH B .CO NTR OL
Routing
MOD FACTOR Y PRO contains 2 independent Modulation modules (MODE
A/MODE B) which can operate individually or simultaneously. Th e in te rn al s ig na l
chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE A
A B
2.Serial MODE B > MODE A
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE B
B A
3. PAR RA LL EL
The signal will first be split into 2 and then go to MODE A and MODE B
simultaneously
The signal will then exit both effe ct m od ul es a nd be mixed together before
reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY set up b y
disabling one of the effe ct m od ul es . To ach ie ve t hi s si mp ly s et e it he r MO DE A or
MODE B to the ‘Off’ pos it io n.
Try s et ti ng M OD E A to ‘Off’ an d ‘M OD E B’ to Vib ra to w hi ls t in PA RR AL LE L
routing to discover a very cool chorus type eff ec t.
MODE A Off MO DE B O ff
Using Presets
MOD FACTOR Y PRO can store 4 presets which can be scrolled through live using
the PRESET fo ot sw it ch . Wh en y ou s av e a pr es et t he p ed al w il l st or e al l of y ou r
parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the
RED LED is highlighted (on the far left) MOD FACTO RY PRO is in pedal mode.
This means that all parameter values will be equal to their respective controls
physical position.
To scroll through presets, press and release the PRESET foo ts wi tc h
To store a preset
Make all settings you wish to save
Press the STO RE b ut to n on ce a nd t he p re se t LE D wi ll b eg in t o fl as h
Select the preset space where you wish to store your settings by pressing the
PRESET fo ot sw it ch
Press the STO RE b ut to n on e mo re t im e to c on fi rm o r mo ve a ny c on tr ol o n th e
pedal to cancel the storage procedure
Connections
INPU T EXP
DC 9V 300 mA
Expression Pedal
Expand the live performance experience of your MOD FACTO RY PRO by using it
with an expression pedal. The e xp re ss io n pe dal can be set to control any one
single parameter of the MOD FACTOR Y PRO.
Connect your expression pedal to the EXP in pu t of t he M OD FA CT ORY PRO
using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to
the EXP and r oc k th e pe de st al o f yo ur e xp re ss io n pe da l ba ck a nd forth
Now you have successfully set the expression pedal to control a parameter
of the MOD FACTO RY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Wei gh t: 400g
* Discl aimer: Spec if ication upd ate is subjec t to c hange witho ut notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com

Pa rt N o:6 20 0 10 64 0
A.S PEE D A.D EPT H A. CON TRO L B. SPE ED B. DEP TH B .CO NTR OL
Routing
MOD FACTOR Y PRO contains 2 independent Modulation modules (MODE
A/MODE B) which can operate individually or simultaneously. Th e in te rn al s ig na l
chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE A
A B
2.Serial MODE B > MODE A
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE B
B A
3. PAR RA LL EL
The signal will first be split into 2 and then go to MODE A and MODE B
simultaneously
The signal will then exit both effe ct m od ul es a nd be mixed together before
reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY set up b y
disabling one of the effe ct m od ul es . To ach ie ve t hi s si mp ly s et e it he r MO DE A or
MODE B to the ‘Off’ pos it io n.
Try s et ti ng M OD E A to ‘Off’ an d ‘M OD E B’ to Vib ra to w hi ls t in PA RR AL LE L
routing to discover a very cool chorus type eff ec t.
MODE A Off MO DE B O ff
Using Presets
MOD FACTOR Y PRO can store 4 presets which can be scrolled through live using
the PRESET fo ot sw it ch . Wh en y ou s av e a pr es et t he p ed al w il l st or e al l of y ou r
parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the
RED LED is highlighted (on the far left) MOD FACTO RY PRO is in pedal mode.
This means that all parameter values will be equal to their respective controls
physical position.
To scroll through presets, press and release the PRESET foo ts wi tc h
To store a preset
Make all settings you wish to save
Press the STO RE b ut to n on ce a nd t he p re se t LE D wi ll b eg in t o fl as h
Select the preset space where you wish to store your settings by pressing the
PRESET fo ot sw it ch
Press the STO RE b ut to n on e mo re t im e to c on fi rm o r mo ve a ny c on tr ol o n th e
pedal to cancel the storage procedure
Connections
INPU T EXP
DC 9V 300 mA
Expression Pedal
Expand the live performance experience of your MOD FACTO RY PRO by using it
with an expression pedal. The e xp re ss io n pe dal can be set to control any one
single parameter of the MOD FACTOR Y PRO.
Connect your expression pedal to the EXP in pu t of t he M OD FA CT ORY PRO
using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to
the EXP and r oc k th e pe de st al o f yo ur e xp re ss io n pe da l ba ck a nd forth
Now you have successfully set the expression pedal to control a parameter
of the MOD FACTO RY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Wei gh t: 400g
* Discl aimer: Spec if ication upd ate is subjec t to c hange witho ut notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com

Pa rt N o:6 20 0 10 64 0
A.S PEE D A.D EPT H A. CON TRO L B. SPE ED B. DEP TH B .CO NTR OL
Routing
MOD FACTOR Y PRO contains 2 independent Modulation modules (MODE
A/MODE B) which can operate individually or simultaneously. Th e in te rn al s ig na l
chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE A
A B
2.Serial MODE B > MODE A
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE B
B A
3. PAR RA LL EL
The signal will first be split into 2 and then go to MODE A and MODE B
simultaneously
The signal will then exit both effe ct m od ul es a nd be mixed together before
reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY set up b y
disabling one of the effe ct m od ul es . To ach ie ve t hi s si mp ly s et e it he r MO DE A or
MODE B to the ‘Off’ pos it io n.
Try s et ti ng M OD E A to ‘Off’ an d ‘M OD E B’ to Vib ra to w hi ls t in PA RR AL LE L
routing to discover a very cool chorus type eff ec t.
MODE A Off MO DE B O ff
Using Presets
MOD FACTOR Y PRO can store 4 presets which can be scrolled through live using
the PRESET fo ot sw it ch . Wh en y ou s av e a pr es et t he p ed al w il l st or e al l of y ou r
parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the
RED LED is highlighted (on the far left) MOD FACTO RY PRO is in pedal mode.
This means that all parameter values will be equal to their respective controls
physical position.
To scroll through presets, press and release the PRESET foo ts wi tc h
To store a preset
Make all settings you wish to save
Press the STO RE b ut to n on ce a nd t he p re se t LE D wi ll b eg in t o fl as h
Select the preset space where you wish to store your settings by pressing the
PRESET fo ot sw it ch
Press the STO RE b ut to n on e mo re t im e to c on fi rm o r mo ve a ny c on tr ol o n th e
pedal to cancel the storage procedure
Connections
INPU T EXP
DC 9V 300 mA
Expression Pedal
Expand the live performance experience of your MOD FACTO RY PRO by using it
with an expression pedal. The e xp re ss io n pe dal can be set to control any one
single parameter of the MOD FACTOR Y PRO.
Connect your expression pedal to the EXP in pu t of t he M OD FA CT ORY PRO
using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to
the EXP and r oc k th e pe de st al o f yo ur e xp re ss io n pe da l ba ck a nd forth
Now you have successfully set the expression pedal to control a parameter
of the MOD FACTO RY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Wei gh t: 400g
* Discl aimer: Spec if ication upd ate is subjec t to c hange witho ut notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com

Pa rt N o:6 20 0 10 64 0
A.S PEE D A.D EPT H A. CON TRO L B. SPE ED B. DEP TH B .CO NTR OL
Routing
MOD FACTOR Y PRO contains 2 independent Modulation modules (MODE
A/MODE B) which can operate individually or simultaneously. Th e in te rn al s ig na l
chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE A
A B
2.Serial MODE B > MODE A
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE B
B A
3. PAR RA LL EL
The signal will first be split into 2 and then go to MODE A and MODE B
simultaneously
The signal will then exit both effe ct m od ul es a nd be mixed together before
reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY set up b y
disabling one of the effe ct m od ul es . To ach ie ve t hi s si mp ly s et e it he r MO DE A or
MODE B to the ‘Off’ pos it io n.
Try s et ti ng M OD E A to ‘Off’ an d ‘M OD E B’ to Vib ra to w hi ls t in PA RR AL LE L
routing to discover a very cool chorus type eff ec t.
MODE A Off MO DE B O ff
Using Presets
MOD FACTOR Y PRO can store 4 presets which can be scrolled through live using
the PRESET fo ot sw it ch . Wh en y ou s av e a pr es et t he p ed al w il l st or e al l of y ou r
parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the
RED LED is highlighted (on the far left) MOD FACTO RY PRO is in pedal mode.
This means that all parameter values will be equal to their respective controls
physical position.
To scroll through presets, press and release the PRESET foo ts wi tc h
To store a preset
Make all settings you wish to save
Press the STO RE b ut to n on ce a nd t he p re se t LE D wi ll b eg in t o fl as h
Select the preset space where you wish to store your settings by pressing the
PRESET fo ot sw it ch
Press the STO RE b ut to n on e mo re t im e to c on fi rm o r mo ve a ny c on tr ol o n th e
pedal to cancel the storage procedure
Connections
INPU T EXP
DC 9V 300 mA
Expression Pedal
Expand the live performance experience of your MOD FACTO RY PRO by using it
with an expression pedal. The e xp re ss io n pe dal can be set to control any one
single parameter of the MOD FACTOR Y PRO.
Connect your expression pedal to the EXP in pu t of t he M OD FA CT ORY PRO
using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to
the EXP and r oc k th e pe de st al o f yo ur e xp re ss io n pe da l ba ck a nd forth
Now you have successfully set the expression pedal to control a parameter
of the MOD FACTO RY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Wei gh t: 400g
* Discl aimer: Spec if ication upd ate is subjec t to c hange witho ut notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com

Pa rt N o:6 20 0 10 64 0
A.S PEE D A.D EPT H A. CON TRO L B. SPE ED B. DEP TH B .CO NTR OL
Routing
MOD FACTOR Y PRO contains 2 independent Modulation modules (MODE
A/MODE B) which can operate individually or simultaneously. Th e in te rn al s ig na l
chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE A
A B
2.Serial MODE B > MODE A
The s ig na l wi ll f ir st g o to M OD E A and th en t o MO DE B
When using this routing the TAP TEM PO c on tr ol s th e ra te o f MO DE B
B A
3. PAR RA LL EL
The signal will first be split into 2 and then go to MODE A and MODE B
simultaneously
The signal will then exit both effe ct m od ul es a nd be mixed together before
reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY set up b y
disabling one of the effe ct m od ul es . To ach ie ve t hi s si mp ly s et e it he r MO DE A or
MODE B to the ‘Off’ pos it io n.
Try s et ti ng M OD E A to ‘Off’ an d ‘M OD E B’ to Vib ra to w hi ls t in PA RR AL LE L
routing to discover a very cool chorus type eff ec t.
MODE A Off MO DE B O ff
Using Presets
MOD FACTOR Y PRO can store 4 presets which can be scrolled through live using
the PRESET fo ot sw it ch . Wh en y ou s av e a pr es et t he p ed al w il l st or e al l of y ou r
parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the
RED LED is highlighted (on the far left) MOD FACTO RY PRO is in pedal mode.
This means that all parameter values will be equal to their respective controls
physical position.
To scroll through presets, press and release the PRESET foo ts wi tc h
To store a preset
Make all settings you wish to save
Press the STO RE b ut to n on ce a nd t he p re se t LE D wi ll b eg in t o fl as h
Select the preset space where you wish to store your settings by pressing the
PRESET fo ot sw it ch
Press the STO RE b ut to n on e mo re t im e to c on fi rm o r mo ve a ny c on tr ol o n th e
pedal to cancel the storage procedure
Connections
INPU T EXP
DC 9V 300 mA
Expression Pedal
Expand the live performance experience of your MOD FACTO RY PRO by using it
with an expression pedal. The e xp re ss io n pe dal can be set to control any one
single parameter of the MOD FACTOR Y PRO.
Connect your expression pedal to the EXP in pu t of t he M OD FA CT ORY PRO
using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to
the EXP and r oc k th e pe de st al o f yo ur e xp re ss io n pe da l ba ck a nd forth
Now you have successfully set the expression pedal to control a parameter
of the MOD FACTO RY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Wei gh t: 400g
* Discl aimer: Spec if ication upd ate is subjec t to c hange witho ut notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com