MOOKA ALLO User manual

USER MANUAL
www.mooka.co
AIR PURIFIER

Our customer service team is standing by to assist you
if you have any questions or concerns.
1-855-558-8999
[email protected]
www.mooka.co
Scan QR-c ode & Start Chatting
or visit:
SCAN ME
m.me/MookaOfficial
Please scan QR-code to start chatting
instantly:
CUSTOMER SERVICE

CONTENT
Points for Attention
Product Overview
Specifications
Installation Filter
Function Instruction
Maintenance
FAQ
01
02
04
04
06
08
09

1. To avoid electric shock and fire, do not allow water , liquid or any flammable
detergent to get
into or to clean the product.
2. Do not spray insecticide, perfume or other flammable spray around the products.
3. Before connecting the power supply, please check whether the voltage of the
product is consistent with the local power supply voltage.
4. This product can not replace normal ventilation, daily dust collection or oil
pumping when cooking.
5. Ensure the product is used in condition of a stable and horizontal level.
6. Leave at least 30cm of space on the back and sides of the product, and at least
50cm of space above the product when using.
7. Ensure both the filter and its cover are properly installed before using.
8. Do not insert finger or other things into the air outlet/inlet to prevent physical
damage or trouble.
POINTS FOR ATTENTION
WARNING
Before using, please read this user manual carefully and keep it for future reference.
[email protected]
- 01 -

PRODUCT OVERVIEW
Components
[email protected]
- 02 -
Control Panel
Air Outlet
Body
Air Inlet
Filter
Base

PRODUCT OVERVIEW
Control Panel
[email protected]
- 03 -
Power Button Reminder of Replacing Filter
Timing indicator light
Wind speed indicator light
Timer Button
Wind Speed Button

· Please remove the packaging of the filter before using for the first time.
· Ensure the machine is unplugged before removing or installing the filter.
· When the power indicator keeps flashing in red, the filter should be replaced.
· Please wipe the dust on the filter regularly, do not wash or use it repeatedly.
· Please use the filter specially designed for this product.
SPECIFICATIONS
INSTALLATION FILTER
Model No. ALLO
[email protected]
- 04 -
Size 195*195*403mm
Net Weight 2.7kg
Input 100-120V 50/60Hz
Power 35W

1. Invert the machine, and rotate the base along the direction marked "OPEN".
2. Take out the filter from the machine.
3. Remove the packaging of the filter.
4. Install the filter into the machine.
5. Then Install the base, rotate and tighten the base along the direction marked "CLOSE”.
STEPS OF INSTALLING FILTER
Unplug the power socket of the machine before replacing or installing the filter.
[email protected]
- 05 -

1. Touch the power button to turn on the machine, the buzzer will ring for one time, the
power indicator and the low grade of wind speed indicator light turns green.
2. Touch the button again, the buzzer will ring for one time and the machine will turn off
with all lights turn off.
Notice: The machine will record the working modes when turns off without unplugging
the power socket.
1. In the condition of working, press the timer button to set among the circulation of 2H,
4H and 8H timer with buzzer rings, and the corresponding indicator will be on.
2. Press again, the timer indicator turns off and the machine will work continuously
without timer.
3. In the status of timing, the machine begins to count down. When the time is up, the
fan will stop working and all lights will be off.
Notice: The timer button couldn’t operate in the status of shutdown.
FUNCTION INSTRUCTION
When connect to the power socket, the buzzer will ring for 1 second.
Button Operation
[email protected]
- 06 -
Power Button
Timer Button

1. In the condition of working, press the wind speed button, the buzzer will ring for one
time.
2. Press again to adjust the wind speed among the circulation of Low grade, Middle
grade and High grade with buzzer rings, the corresponding indicator will be on.
Notice: The wind speed adjustment couldn’t operate in the status of shutdown.
When the accumulated operation of the air purifier reaches 2200 hours, the indicator
flashes red; the new filter is required to be replaced. After replacing the new filter, press
and hold the power button for about 7 seconds to release the alarm.
Notice: Users do not need to reset when using the machine for the first time after
installing the filer.
Button Operation
[email protected]
- 07 -
Wind Speed Button
Reminder of Replacing Filter

· Ensure the machine is unplugged before maintenance.
· Do not immerse the machine into water or any liquid.
· Do not use abrasive, corrosive or flammable cleansers (such as bleach or alcohol) to
clean any part of the unit.
· Don't use a vacuum cleaner to clean the filter or wash it directly.
· Please sterilize the filter under sunlight regularly.
MAINTENANCE
Note
1. Ensure the machine is power-off and unplugged.
2. Use a soft cloth with neutral cleanser to clean away any dust or debris from the surface
of the unit and air inlet/outlet.
3. After the machine completely dry out, put on the bag and place it in a cool and well
ventilated place.
4. If you do not use it for a long time, in the basic of previous steps, please turn on the
machine for a few minutes from time to time to ensure a good performance.
Notice: Please don’t drop any water into the machine when clean the air outlet.
Cleaning & Storage
[email protected]
- 08 -

Notice: If the above FAQ can not solve your problems and need maintenance, please
contact the supplier or after sales service center. Please do not disassemble the machine
to maintain by yourself.
FAQ
[email protected]
- 09 -
No working
Coming out
nasty smell
The reminder of
replacing filter is sitll
flashing after user have
replaced a new one.
SITUATION
Poor performance
REASON
●Is it plugged into a power socket? Is there a power outage?
●Is the home leakage switch or fuse cut off?
●Is there any dust in the surface of pre-filter?
●Is there any obstacle blocking the air inlet/outlet.
●It is the normal phenomenon that the machine emits the smell
of plastic for the first time.
The machine will emit nasty smell if the filter is dusty, so in this
situation, please clean or replace the filter.
●If the burning smell emits from the machine, please unplug the
power socket and contact with buyer or customer service.
●Please press the power button for 7s to reset the machine
and the life counter of the filter will start.
Significant noise
●Is there anything stuck on the fan in the air outlet?
●Is the machine tilted?
●Please set a lower grade of wind speed if the noise is too loud ,
or set low grade of wind speed when using in bedroom at night.
●Is the filter replacing indicator keep flashing?

1-855-558-8999
[email protected].
www.mooka.co
Dear customer, thank you for your purchase. Our customer service team is standing by to
assist you if you have any questions or concerns.
Every product purchased from us comes with a 1-year warranty.
If we can't solve your problem, a new
replacement or refund is 100% guaranteed.
WARRANTY
If you are satisfied with the air purifier,
you can activate the warranty via
www.mooka.co/warranty.
If you are dissatisfied with the air
purifier, or want to return it, please
follow the below steps:
Find you order ID on Amazon
Supply the order number to our customer
support team: www.mooka.co/support
$

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

Made in China
BRINGING FRESHER AIR TO YOUR HOME