MOONKI MA-TWS66 User manual

Wireless Bluetooth Stereo Earbuds
1. Stereo or mono mode Headphone. You can choose between left, right earbuds or
stereo playback.
2. True Wireless Stereo Sound (TWS)
3. Charging case with compact configuration.
Before using
Before starting to use this product you must remove the protective plastic covering
the charging contacts of the earbuds.
Functioning
Charging Base
1. Before using the earbuds for the first time, fully charge the base. Connect to USB port
charging to a USB cable, and at the other end of it to a suitable charger or a PC. The
level of charge is indicated by 4 LED lights (each light indicates 25% of the total charge).
When the 4 lights are power on, please disconnect the base from the power supply.
2. The full charge of the base takes approximately 1 Hr.
3. The base functions both as a carrying case and as a charger for the earbuds.
Recharging the earbuds with the case
1. Before using the earbuds, you must fully charge the battery of the earbuds.
2. Charging the earbuds takes between 1 and 2 Hr.
3. When the battery is charging, a red LED will stay on on the earbuds. When charging
is complete it will turn off.

4. When the battery charge is very low, a notification will be heard every one minute
indicating that the battery must be recharged. When this happens, proceed to recharge
the battery following the instructions in the previous step.
5. If the earbuds has not been used for a long time and has been discharged for a long
time, the indicator LED may take a few minutes to turn on.
6. If the earbuds is not used or if it is not recharged for a certain period of time, the
headset will turn off.
Base charging indicator
Indicator LED
Multipurpose button
Microphone
Micro USB
Security Lock

Place the earbud
on your ear
Bluetooth pairing
Open the case. Remove the earbuds. They will quickly pair with each other.
Accommodate
the earbud
for comfort
Rotate the earbud
and make sure it
makes good contact
with your ear
Placement mode

Call
1. With the earbuds connected to your cell phone you will be able to answer calls
from the earbuds .
2. The earbuds will play the ID of the incoming call. Press the multi-function button to
answer, or press and hold to reject the call.
3. Press the multi-function button while on a call to end the call. Doing so will return
the earbuds to the previous working state.
4. The call volume must be adjusted from the cell phone.
Music Playback
1. Turn on the earbuds and pair them with your playing device.
2. When there is an incoming call, press the multi-function button to answer, or press
and hold to reject the call.
3. Press the multi-function button twice to skip to the next track, or press it three times
to go back to the previous track.
COMPATIBLE WITH:

Parameters
Bluetooth version. 5.0
Range Distance: 10 mtrs
Working Frequency (bluetooth): 2.402 Ghz - 2480 Ghz
Signal to Noise Ratio:> 75dB
Impedance: 16 Ohm
Input Voltage: DC5V
Charging Time: Less than 2 Hrs
Playback Time: Up to 4.5 Hrs
Profile Compatible: A2DP, AVRCP1.4, HFP
CAUTION
- Do not use this product in the shower or in the rain.
- Keep away from WIFI Routers or other Bluetooth devices to avoid signal interference
- Use this product within the range of 10 mtrs and without obstacles in between
(such as walls)
- In case of abnormal operation, disconnect the pairing, reset the earbuds and
follow the steps for a new pairing again.
Made in PRC
PACKAGING CONTENT
2 Earbuds
Micro USB cable
Charging case
Cap spare parts * 3
User manual
Warranty card