MORI ETH-600 User manual
manual
Electric tea
harvester
ETH-600
ISO 9001: 2000
Rev. 2021/05/10
Before using the electric tea picker, please read the following
instructions carefully to ensure safe operation！
Contents
1. Symbol description and precautions
2. Safety rules
3. Technical Information
4. Installation instructions for spare parts
5. Basic Operation Instructions
6. Instructions for harvesting tea
7. Maintenance
-1. Symbol description and precautions
must read and follow the operation manual before use.
Wear qualified and protective earmuffs and goggles
Wear qualified and protective gloves
Wear protective boots with strong and durable operation
manual
Do not touch the blade
Do not use in rain or humid environment
Must be charged and stored indoors in a dry and ventilated
place
Must store battery separately after usage from the equipment
to avoid accidental touch or self-consumption of battery
2. Safety rules
Before using this machine
*Please read the operation manual carefully.
*Please check and maintain the machine in a flat place to avoid moving or dropping the
machine.
*Check the correct assembly and adjustment of the cutter.
*Ensure that any failure has been repaired.
*Check clothing and protective equipment (safety helmet, goggles, safety shoes, gloves,
earplugs, etc. ).
*Do not touch the blade with bare hands (gloves should be worn).
Precautions
1. Check the work place carefully and confirm that there are no dangerous items.
2. Do not perform work on unstable foundations.
3. During the operation, be sure to keep bystanders or obstacles (wires, etc.) at least 5
meters away.
4. Do not use the electric tea harvester for other purposes.
5. During the operation, do not touch obstacles such as stones and metals.
6. Do not touch the blade, otherwise it will cause serious injury.
7. If a branch gets into the blade, be sure to turn off the power before removing the
branch.
8. During transferring, carrying or storing the machine, the battery connection must be
removed.
9. When moving or transporting, make sure to cover the cutting blade with the blade
cover.
10. When using a vehicle to transport the product, please secure the machine to the
vehicle to prevent it from tipping or falling.
11. When storing the machine, it needs to be thoroughly cleaned and maintained.
12. When storing the machine, if the machine is placed upright, it may cause accidental
injury.
13. Ask your dealer or authorized agent for regular inspection and maintenance of the
machine.
3. Technical information
Specification
IItem
One man tea harvester
Model no. ETH-600
Vvoltage
36 VDC
Weight ( without battery ) 4.6 kgs
RPM ( motor )
8500 /min
Llength 870 mm
Length of blade
590 mm
Continuous operating time
battery：6.3Ah
30~40 minutes
Continuous operating time
battery：25.2Ah
120 ~ 130 minutes
操作噪音
90 dB
The above technical information will be
different due to the different testing
environment and will be with differences in
datas.
4. Installation instructions for spare parts
Installation of leaf bag
The mesh of the leaf-collecting bag faces upwards, the lower half of the opening is
stuffed into the sheet metal.
Use four bag hooks to fix, and tie the belt tightly to avoid leaf collecting bag (Figure 1)
falling off.
Tie the other side of the leaf collection bag tightly to prevent the leaves from falling out.
Figure 1
If the leaf collection bag is loose or too tight,
adjust the strap at the opening of the bag. If too
loosened , the leaf collecting bag may fall off the
machine during work
Use leaf-collecting bags with mesh only
6. Basic operation instructions
1. connect the battery cable to the machine and tighten the nut (Figure 2).
2. turn on the power switch (Figure 3).
3. Press and hold the safety device to press the throttle lever.
4. The user can change the speed by using 2 speed switch
5. Please turn off the power switch during resting.
6. Must wear qualified & protective equipments during work
7. Must take out the battery and store it separately after works
9. Must fully charge the battery before storage.
Figure 2
Fibure 3
Figure 3
Must check the machine and blade, if hit any object or stone
Need to replace qualified parts and blade, as they might
cause injury during operation
Must turn off the power and take out the battery during
any maintenance works or repaires.
Need to fully charge the battery after works for future usage
2 speed switch
Power switch
Safety device
Throttle lever
8. Maintenance
For blade
1. Clean the blade with a clean cloth after usage.
2. Please use lubricating oil to lubricate the blade before and after each usage.
Please replace the blade, if the blade gap is too large to cut.
Adjustment of air hose
Please check the air hose is in the correct position If the picked leaves are blocked by the
machine or have bad cutting sections
Note
If a part of the air hose is pressed, it may deform or change its
direction, so do not press it.
If you find any abnormality, please contact the authorized dealer
immediately for repair.
Records of maintenance
TEAM MACHINERY CO., LTD. / TMC
No. 209, SHEN AN ROAD, CHANG HWA CITY, TAIWAN, R.O.C.
TEL:+886-4-7373668 FAX:+886-4-7371618 MFG ID : 28643855
E-mail : sales@trimmer.com.tw URL : www.trimmer.com.tw
TMC MORI © 1997-2008 Team Machinery Co., Ltd. All Rights Reserved
Table of contents
