Morphy Richards Redefine 131000 User manual

Instruction manual
Please read and keep these instructions for future use
Mode d'emploi
Merci de bien vouloir lire et conserver ces instructions pour pouvoir les consulter ultérieurement
Bedienungshandbuch
Lesen Sie bitte diese Anleitungen und bewahren Sie sie für einen eventuellen späteren Gebrauch auf
Manual de instrucciones
Lea estas instrucciones atentamente y guárdelas
Istruzioni
Si raccomanda di conservare queste istruzioni per uso futuro
Vejledning
Du skal læse og beholde denne vejledning til fremtidig brug
Návod k použití
Přečtěte si tyto pokyny a uschovejte si je pro budoucí použití
Kullanım kılavuzu
Lütfen gelecekte kullanmak üzere bu talimatları okuyun ve saklayın
g
f
d
e
i
q
∂
t

2
g Health & Safety
The use of any electrical appliance requires the following common sense safety rules.
Please read these instructions carefully before using the product.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Keep the appliance and its cord out of reach of children.
• This appliance is intended to be used in household and similar
applications such as: farm houses, by clients in hotels, motels
and other residential type environments, bed and breakfast
type environments.
It is not suitable for use in staff kitchen areas in shops, offices
and other working environments.

Location
• Always locate your appliance away from the edge of the
worktop.
• Ensure that the appliance is used on a firm, flat surface.
• Do not use the appliance outdoors or near water.
• WARNING: Do not place the appliance onto a metal
tray or metal surface whilst in use.
Mains cable
• Do not let the mains cable hang over the edge of the
worktop where a child could reach it.
• Do not let the mains cable run across an open space e.g.
between a low socket and a table.
• Do not let the mains cable run across a cooker or other hot
area which might damage the cable.
• The mains cable should reach from the socket to the base
unit without straining the connections.
• If the mains cable is damaged, it must be replaced by the
manufacturer, it’s service agent or similarly qualified person
in order to avoid a hazard.
Personal safety
• WARNING: To protect against fire, electric shock
and personal injury do not immerse cord, plug and
appliance in water or any other liquid.
• Unplug from the outlet before cleaning.
• Allow to cool before putting on or taking off parts and
before cleaning.
Other safety considerations
• The use of attachments or tools not recommended or sold
by Morphy Richards, may cause fire, electric shock or
injury.
• Do not use the appliance for any use other than to boil
water.
• Do not place the appliance on or near a hot gas or electric
burner or in a heated oven.
• The Water Tank must not be in the Main Unit when being
filled with water.
• Unplug from the outlet when not in use.
• WARNING: The appliance must not be immersed for
cleaning.
CAUTION: To prevent damage to the appliance, do not
use alkaline cleaning agents when cleaning. Use a soft
cloth and detergent.
Electrical requirements
• Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
• Should the fuse in the mains plug require changing, a 13
amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
g
f
d
e
i
q
∂
t

4
19
20
21
23
13 14
15
16
17
18
7
7
22 89
10
11
12
1
1
2
2
3
3
4
4
5
5
6
1
34

2
56
78
910
11 12
13 14
g
f
d
e
i
q
∂
t

6
15 16
17 18
2019
22
21
25
seconds
23 24

g
f
d
e
i
q
∂
t
27
25
28
26
29

8
BRITA filtration
Filtering your water improves the taste and
appearance of beverages by reducing limescale, lead,
chlorine and other impurities.
The BRITA MAXTRA Filter Cartridge offers improved filtration
due to MAXTRA Technology. The natural
MicroporeFilter in combination with the powerful Protect
Filter reduces chlorine and limescale for a great natural taste
and further reduces metals such as lead and copper. Unique
flow control ensures the perfect
filtration time for best results.
For maximum filter performance and for optimum taste, it is
important to change your BRITA MAXTRA Filter Cartridge
regularly. BRITA recommends that you replace the cartridge
every 4 weeks.
Using the BRITA filtration system is optional. If you do not
wish to use the filtration system, simply remove the BRITA
Hopper (21) and MAXTRA Filter Cartridge (19) from the Water
Tank (7).
Filtering water through the BRITA Filtration System takes
roughly 4 minutes to filter 1.5L of water. You can use the
system while filtering, providing enough water has filtered
into the Water Tank.
Installing a BRITA MAXTRA
Cartrige 1
1 Unwrap the BRITA MAXTRA Cartridge (19) and immerse
in water, gently shake to loosen any bubbles.
2 Push the BRITA MAXTRA Cartridge into place in the
BRITA Hopper.
3 Place the BRITA Hopper into the Water Tank.
Before returning the Water Tank to the Main Unit, fill the
BRITA Hopper with Cold Water and allow the
water to filter through the BRITA MAXTRA Cartridge.
Discard the filtered water. Repeat this step twice.
4 Fill the Brita Hopper with fresh water and return the
Water Tank to the main unit. Your BRITA Cartridge is
ready for use with your Hot Water Dispenser.
BRITA Memo 2
The BRITA Memo (20) measures the recommended time of
use of your MAXTRA Filter Cartridge (19). The BRITA Memo
is located in the top of the BRITA Hopper (21).
To reset the BRITA Memo, please press and hold down the
Start Button on the Memo until all four bars appear in the
display and flash twice. The Cartridge Active Indicator Light
in the bottom right corner of the BRITA Memo indicates that
it is working. After four weeks, all four bars will disappear
and a flashing arrow will indicate that the cartridge should
now be changed. After changing the cartridge, reset the
Memo.
Replacing the BRITA Memo
The BRITA Memo (20) has a life of approximately 5 years. To
remove the exhausted BRITA Memo, place a screwdriver in
the notch next to the BRITA Memo and push it out. Please
note that BRITA Memo should not be removed for any other
reason than to dispose of it.
More information on the use of BRITA filter cartridges and
the BRITA Memo can be found in the BRITA information
guide supplied with your hot water dispenser.
Telephone our replacement parts helpline (0844 873 0726)
for your new BRITA Memo. If you require assistance on using
your BRITA MAXTRA filter cartridge or BRITA Memo, please
call BRITA Customer Care team on 0844 742 4800.

Features
1 Start / Stop Button
Starts and pauses the heating process. Can also be used
to pause dispense while in progress and put the Hot Water
Dispenser into standby mode.
2 Water Volume Dial
Controls the volume of water to be heated and
dispensed. Volume is displayed on the LCD screen (15).
3 LCD Screen
Displays volumes, temperatures, functions, and warnings.
4 Temperature Button
Adjusts the temperature of dispensed water, turns sounds on
and off.
5 Dispense Button
Switches the Auto Dispense feature on and off.
6 Dispense Nozzles
7 Water tank
Contains the BRITA MAXTRA Cartridge 19, BRITA Memo 20 and
BRITA Hopper 21.
8 Drip Tray
9 Drip Tray Cover
10 Drip Tray Indicator
‘Full’ icon indicates when the Drip Tray needs to be emptied.
11 Heat Icon
Displays when the heat cycle is in process.
12 Water Tank Icon
Displays when the tank needs to be refilled.
13 Dispense Icon
Displays when water is ready for dispense.
14 Auto Dispense Icon
Displays when the auto dispense feature is enabled.
15 Dispense Volume Display
Displays the volume of water to be heated and
dispensed.
16 Descale Icon
Displays when the Hot Water Dispenser requires
descaling.
17 Temperature Icon
Displays the temperature the water will be heated to prior to
dispense.
18 Standby Light
19 BRITA MAXTRA Cartridge
20 BRITA MEMO
Monitors the life of the MAXTRA Cartridge.
21 BRITA Hopper
22 Water Level Sensor
23 Main Unit
Using the Hot Water
Dispenser
Before using your Hot Water Dispenser, or if it
has not been used for over a week, follow these
instructions to boil the maximum amount of water,
then discard to ensure the system is flushed
through.
The following instructions detail the steps to
follow to use your Hot Water Dispenser. For Installation of
the BRITA Filtration system see 'Installing a BRITA MAXTRA
Cartridge'.
Filtering water through the BRITA Maxtra
Cartridge takes around 4 minutes for 1.5L. Ensure enough
water has been filtered and is ready for use in the water tank
before heating.
3 If required, follow steps of 1-6 of ‘Resetting the system’
to reset the system and then discard the water. If the Hot
Water Dispenser is in standby mode, press any button to
wake.
4 Pull out the Drip Tray (8) from the Main Unit (23)
(if needed).
5 Place the required vessel (cup, pan, pot etc.) under the
Dispense Nozzles (6). One or two vessels can be filled
at the same time during each dispense cycle, provided
they are the same size.
6 Adjust the temperature of the water by pressing the
Temperature Button (4) to cycle through the
options (85,95 & 100°C). The water temperature will be
displayed on the screen (17).
7 Turn the Water Volume Dial (2) to adjust the Dispense
Volume (15). Your Hot Water Dispenser can heat between
150ml to 1.5L of water per cycle.
8 You can automatically dispense volumes of water at
600ml and below. To turn this feature on or off, press the
Dispense Button (5). This function cannot be selected for
volumes over 600ml. These must be dispensed manually.
9 Press the Start / Stop Button (1) to begin heating. Your
Hot Water Dispenser will sound and the heat cycle will
begin. Once started, the volume and
temperature can only be changed during the first few
seconds of the heating cycle.
10 Once ready your Hot Water Dispenser will sound.
The hot water will be dispensed automatically. If the
manual dispense function has been selected, press the
Dispense Button (5) to begin dispensing.
g
f
d
e
i
q
∂
t

10
11 To pause the water flow whilst dispensing, press either
the Start/Stop or the Dispense Button.
12 To resume the water flow, press the Dispense Button
again.
NOTE: You must dispense all water heated before you
can start the heating cycle again.
Drinks Temperature
Getting the correct water temperature is essential if you are
to enjoy your favourite hot drinks with maximum flavour and
taste.
By choosing the correct temperature for your drink, not only
will you create better tasting drinks, you will also save time
and energy too.
85°C
Green, white and herbal teas, powder based cold and flu
remedies, black instant coffee.
95°C
French press/cafetiere coffee, instant coffee with milk, hot
toddies, malted milk, hot chocolate.
100°C
Black teas e.g. darjeeling, assam, ceylon, english breakfast
and earl grey, noodle / pasta snacks, instant soup type
drinks.
Auto/Manual Dispense 13
The auto dispense feature allows you to automatically
dispense volumes of water below 600ml. For safety reasons
it is not possible to automatically dispense volumes above
600ml.
Before heating, press the Dispense Button (5) to switch the
auto dispense feature on or off. The Icon (14) will
appear on the LCD Screen (3) when the feature is enabled.
After heating, if the volume is above 600ml, or if the auto
dispense is turned off, your Hot Water Dispenser will sound
and the Dispense Button will Illuminate. Press the Dispense
Button to begin dispensing water from the Dispense Nozzles
(6).
NOTE: All water must be dispensed before you can start the
heating cycle again.
Multiple Cups
Multiple cups can be filled quickly and easily by starting and
stopping the dispense cycle and exchanging vessels.
1 Set your Hot Water Dispenser unit to heat a desired
amount of water with the Auto Dispense featue
switched off. Place two cups under the Dispense
Nozzles (6) and dispense the water by pressing the
Dispense Button (5).
2 When the cups are filled press the Dispense Button
again to stop the flow.
3 Place another two empty cups under the Dispense
Nozzles and repeat the process until all remaining water
has been dispensed.
Dispense Nozzles 14
There are two Dispense Nozzles (6) on your Hot Water
Dispenser. These can be used to fill one or two cups at one
time. 15
If dispensing into two vessels try to ensure they are of equal
size and heat double the amount of water
required for one. Place your cups on the Drip Tray
(underneath the Dispense Nozzles). Your Hot Water
Dispenser will dispense an equal amount from each Nozzle.
Cancel the heating cycle
To cancel the heating cycle at any time, press the Start /
Stop Button (1). Press either the Start / Stop Button again to
continue the current cycle or press the Dispense Button (5)
to empty the water.
Once a heating cycle has begun, the volume and
temperature of the water can only be changed during the
first few seconds of the heating cycle.
The Water in the heating chamber must be dispensed before
a new volume can be selected.
Reheating Water
Any water remaining in the heating chamber that has cooled
down by 5 degrees can be reheated.
The Start / Stop Button (1) will illuminate and the
Heat Icon (11) will extinguish indicating the reheat
function can be activated. Press the Start / Stop Button to
reheat.

Sound
The audible signals from your Hot Water Dispenser can be
turned on or off. Press and hold the Temperature Button (4)
for 2 seconds to switch the sounds on or off.
Standby
Your Hot Water Dispenser will enter Standby Mode to
save power 60 seconds after the end of the heating and
dispense cycle. The unit enters standby mode after 30
minutes of inactivity if a heat and dispense cycle hasn’t been
completed. To wake the unit, press any button or rotate the
Water Volume Dial (2).
The Hot Water Dispenser can be placed in standby mode by
pressing the Start/Stop Button (1) for 2 seconds.
Any water remaining in the Heating Chamber when your Hot
Water Dispenser enters stand by will need to be dispensed
upon exiting standby, or reheated and dispensed before a
new volume or temperature can be selected.
Drip Tray 16
The Drip Tray Indicator (10) indicates that the Drip Tray (8)
is full and must be emptied. To empty, pull the drip tray
outwards until it is free from the runners and
discard the contents. CAUTION! The contents of the drip tray
may be hot. Replace the Drip Tray once emptied ensuring
the Drip Tray Cover (9) is replaced correctly.
Descale 17
This product is fitted with a concealed element that must be
descaled when the Descale Icon (16) illuminates. Excessive
scale can cause the product to switch off before the end of
the heating cycle and may damage the element invalidating
the warranty.
Remove hard scale using a proprietary descaling product.
We recommend Oust Descaler (please follow the instructions
carefully) which may be purchased from our Helpline or from
your local retailer.
To descale the unit:
1 Remove the BRITA Hopper (21) and MAXTRA cartridge
(19) from the Water Tank (7).
2 Fill the Water Tank to the MAX line with cold water add
the Oust Descaler as per manufacturers instructions.
3 When the crystals have dissolved, set the unit to heat
1.5 litres of water to 85 degrees.
Do not boil to 100 degrees
4 Leave the Hot Water Dispenser for 10 minutes.
Do not dispense the water!
5 After 10 minutes, dispense the water from the Heating
Chamber into a vessel and discard.
6 Empty the water tank and rinse thoroughly with cold
water.
7 Fill the water tank to the MAX line with cold water, set
the unit to boil 1.5 litres to 100 degrees and dispense
the water. Discard the water and repeat the cycle 3 times
8 Replace the BRITA Hopper and MAXTRA cartridge into
the Water Tank. Fill with fresh water.
9 Press and hold the Start / Stop Button (1) and Dispense
Button (5) for 5 seconds to reset the descale time. The
descale icon will extinguish. The Hot Water Dispenser
will reset and the unit will return to ready mode.
10 After 60 seconds of inactivity the Hot Water Dispenser
will enter standby.
Cleaning
Wipe the outside with a damp cloth.
WARNING: Always disconnect the plug from the
mains and allow the appliance to cool before cleaning.
IMPORTANT: Do not use abrasive cleaners on the
outside of the appliance, as they may scratch the
surface.
g
f
d
e
i
q
∂
t

12
Resetting the system
18 Plug your Hot Water Dispenser into the mains outlet and
switch on at the socket.
21 The Dispense Button (5) will flash and the ‘Dispense Icon’
(13) will appear on the screen.
22 Place an empty vessel, such as a measuring jug or
saucepan underneath the Dispense Nozzles (6).
23 Press the Dispense Button to reset the system. Any
remaining water will be dispensed from the system into
the vessel below. This takes approximately 35 seconds. It
is now ready for use.
Before using your Hot Water Dispenser for the first time,
or after it has been unplugged from the mains. You must
perform the following steps to reset your Hot Water
Dispensers’ heating chamber.
Your Hot Water Dispenser will not function
if the system has not been reset.
LCD Display Glossary
Below are some of the icons that may highlight during
use, and their meaning. Refer to the instruction book for
more information on the settings.
Reset 24
After the Hot Water Dispenser has been switched on, the
Dispense Icon (13) and the Dispense Button (5) are flashing.
The system needs to be reset before use. Follow the
instructions under ‘Resetting the System’.
Auto Dispense 25
The Auto Dispense (14) Icon is lit after heating.
Volumes between 150-600ml will be automatically dispensed
unless deselected by pressing the Dispense Button (5).
Volumes above 600ml cannot automatically be dispensed.
Water Still to Dispense 26
After heating or being woken from standby, the Dispense
Icon (13) is flashing.
There is still water remaining in the heating chamber. Either
reheat or dispense water before next use.
Water Tank 27
The Water Tank Icon (12) is flashing.
The Water Tank (7) is either empty or not properly fitted.
Fill the Water Tank and ensure the Water Tank is securley
fitted to the Main Unit (23).
Heat Icon 28
In manual dispense mode, after heating the water the Heat
Icon (11) remains lit.
The Boil Icon remains lit while the water is within 5°C
of the desired temperature. If the water drops more than
5°C then the icon will extinguish, the Start Stop Button will
illuminate and the water can be reheated by pressing the
Start/Stop Button (1).
Descale 29
The Descale Icon (16) is lit.
Your Hot water Dispenser needs descaling. Follow the
instructions under ‘Descaling’ to descale the heating
chamber.

Troubleshooting
If Water Tank Icon (12) flashes
The tank may be empty OR have insufficent water to heat
the selected amount.
Solution
• Fill the Water Tank with water.
• Check the Water Tank is fitted correctly.
• If this does not work check the Water Level Sensor (22)
on the rear of the Water Tank is not stuck in the down
position. Lightly tap to loosen.
The sound effects have turned
themselves on.
If sound is switched off, and your hot water dispense is
unplugged, (or there is a power cut), the next time it is
switched on the sound effects will be reactivated.
Solution
• Turn the sound effects off. To do so, press and hold the
Temperature Button (4) for 2 seconds.
Hot Water Dispenser will not heat when woken from
standby.
If the Water Tank Icon (12) is not flashing and the
Dispense Icon (13) is lit. The Hot Water Dispenser has
remaining water in the heating chamber that must be
dispensed before a new heating process can be started.
Solution
• Press the Dispense Button (5) to empty the chamber
into a suitable vessel.
OR
• Reheat any water remaining in the chamber by pressing
the Start/Stop Button (1).
The Hot Water Dispenser will not switch on, there is
no response.
If the product is plugged in and switched on at the socket
but there is no power.
Solution
• Check your main fuse box has not tripped.
Reset the fuse if it has.
• Check the electrical socket with a product you know is
working, such as a lamp.
• Replace the fuse in the Hot Water Dispenser plug
(13amp fuse).
The Hot Water Dispenser is not
dispensing the correct amounts.
The pipes or Dispense Nozzles (6) may be blocked.
Solution
• Descale your Hot Water Dispenser (see page 9).
• Check there are no blockages in the Dispense
Nozzles (6). (WARNING - Water remaining in the Nozzles
may be HOT).
The Auto Dispense Icon is not lit
after heating, no water has been
dispensed..
The Auto Dispense feature is not enabled OR you are trying
to heat more than 600ml.
Solution
• Press the Dispense Button to dispense the water that
has just been heated.
g
f
d
e
i
q
∂
t

14
Contact Us
Helpline
If you are having a problem with your appliance, please call
our Helpline, as we are more likely to be able to help than the
store you purchased the item from. Please have the product
name, model number and serial number to hand when you
call to help us deal with your enquiry quicker.
UK Helpline 0844 871 0960
EIRE Helpline 1800 409 119
Spares 0844 873 0726
If you require assistance on using your BRITA MAXTRA filter
cartridge or BRITA Memo, please call BRITA
Customer Care team on the telephone number below.
BRITA Helpline 0844 742 4800
Talk To Us
If you have any questions or comments, or want some great
tips or recipe ideas to help you get the most out of your
products, join us online:
Blog www.morphyrichards.co.uk/blog
Facebook facebook.com/morphyrichardsuk
Twitter @loveyourmorphy
Website www.morphyrichards.com
THIS SECTION IS ONLY APPLICABLE FOR
CUSTOMERS IN UK AND IRELAND
Registering your
two year guarantee
Your standard one year guarantee is extended for an
additional 12 months when you register the product within
28 days of purchase with Morphy Richards. If you do not
register the product with Morphy Richards within 28 days,
your product is guaranteed for 1 year. To validate your 2 year
guarantee register with us online at www.morphyrichards.
co.uk
N.B. Each qualifying product needs to be registered with
Morphy Richards individually. Please refer to the one year
guarantee for more information.
Your one year guarantee
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference. Please quote the following information if the
product develops a fault. These numbers can be found on the
base of the product.
Model no.
Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should be
returned to the place of purchase for it to be replaced. If the
fault develops after 28 days and within 12 months of original
purchase, you should contact the Helpline number quoting
Model number and Serial number on the product, or write to
Morphy Richards at the address shown. You may be asked to
return a copy of proof of purchase. Subject to the exclusions
set out below (see Exclusions), the faulty appliance will
then be repaired or replaced and dispatched usually within
7 working days of receipt. If, for any reason, this item is
replaced during the 1 year guarantee period, the guarantee
on the new item will be calculated from original purchase
date. Therefore it is vital to retain your original till receipt or
invoice to indicate the date of initial purchase. To qualify for
the 1 year guarantee, the appliance must have been used
according to the instructions supplied. For example, crumb
trays should have been emptied regularly.
EXCLUSIONS
Morphy Richards shall not be liable to replace or repair the
goods under the terms of the guarantee where:

1 The fault has been caused or is attributable to accidental
use, misuse, negligent use or used contrary to the
manufacturer’s recommendations or where the fault has
been caused by power surges or damage caused in
transit.
2 The appliance has been used on a voltage supply other
than that stamped on the products.
3 Repairs have been attempted by persons other than our
service staff (or authorised dealer).
4 The appliance has been used for hire purposes or non
domestic use.
5 The appliance is second hand.
6 Morphy Richards are not liable to carry out any type of
servicing work, under the guarantee.
7 Plastic filters for all Morphy Richards kettles and coffee
makers are not covered by the guarantee.
8 Batteries and damage from leakage are not covered by
the guarantee.
9 The filters have not be cleaned and replaced as
instructed.
This guarantee does not confer any rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This guarantee is offered as
an additional benefit and does not affect your statutory rights
as a consumer.
Your International
two year guarantee
This appliance is covered by two-year repair or replacement
warranty.
It is important to retain the retailers receipt as proof of
purchase. Staple your receipt to this back cover for future
reference.
Please quote the following information if the product
develops a fault. These numbers can be found on the base
of the product.
Model no.
Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase it should be
returned to the place of purchase for it to be replaced.
If the fault develops after 28 days and within 24 months of
original purchase, you should contact your local distributor
quoting Model number and Serial number on the product, or
write to your local distributor at the addresses shown.
You will be asked to return the product (in secure, adequate
packaging) to the address below along with a copy of proof
of purchase.
Subject to the exclusions set out below (1-9) the faulty
appliance will then be repaired or replaced and dispatched
usually within 7 working days of receipt.
If for any reason this item is replaced during the 2-year
guarantee period, the guarantee on the new item will be
calculated from original purchase date. Therefore it is vital to
retain your original till receipt or invoice to indicate the date
of initial purchase.
To qualify for the 2-year guarantee the appliance must have
been used according to the manufacturers instructions. For
example, appliances must have been descaled and filters
must have been kept clean as instructed.
The local distributor shall not be liable to replace or repair
the goods under the terms of the guarantee where:
1 The fault has been caused or is attributable to accidental
use, misuse, negligent use or used contrary to the
manufacturers recommendations or where the fault has
been caused by power surges or damage caused in
transit.
2 The appliance has been used on a voltage supply other
than that stamped on the products.
3 Repairs have been attempted by persons other than our
service staff (or authorised dealer).
4 Where the appliance has been used for hire purposes or
non domestic use.
5 The appliance is second hand.
6 The local distributor are not liable to carry out any type
of servicing work, under the guarantee.
7 The guarantee excludes consumables such as bags,
filters and glass carafes.
8 Batteries and damage from leakage are not covered by
the guarantee.
9 The filters have not be cleaned and replaced as
instructed.
This guarantee does not confer any rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This guarantee is offered
as an additional benefit and does not affect your statutory
rights as a consumer.
g
f
d
e
i
q
∂
t

16
AUSTRALIAN WARRANTY
This appliance is guaranteed for 2 years against faulty
material, components and workmanship.
This warranty is in addition and does not affect your statutory
rights.
Proof of purchase must be produced for any warranty benefit.
In the unlikely event of any appliance proving to be faulty,
securely pack and return the item to the place of purchase
accompanied by the original receipt or invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Not covered by this warranty
(Australian only)
• If the appliance has not been used in accordance with
the manufacturers’ recommendations or Instructions.
• If the fault is deemed to be caused by abuse, misuse,
neglect, modifications or in proper use and or care
Eg: Kettles: Excessive build up of scale.
Toasters: Excessive build up of crumbs or foreign matter
etc.
• Connection to incorrect voltage to that stamped on the
product.
• Unauthorised repairs.
• Appliance used other than for domestic purposes.
• Excluding bags, filters, glass, carafes, and cutting blades.
• Freight and insurance costs.
If for any reason this item is replaced during the 2 year
guarantee period, the guarantee on the new item will be
calculated from original purchase date. Therefore it is vital to
retain your original receipt or invoice to indicate the date of
original purchase.
Morphy Richards’s policy is to continually improve quality
design and product quality. The company therefore reserves
the right to change any specifications or to carry out
modifications as deemed worthy at any time.
The Australian supplier ASKO Appliances reserves the right to
repair, modify, exchange or replace the faulty appliance with
the same or similar model or product of equivalent value.

f Santé et sécurité
L'utilisation de tout appareil électrique implique de respecter les règles de sécurité et de bon sens suivantes.
Merci de lire attentivement ces instructions avant d'utiliser le produit.
• Cet appareil peut être utilisé par les enfants âgés de 8 ans
et plus et les personnes souffrant de facultés physiques,
sensorielles ou mentales réduites, ou d'un manque
d'expérience ou de connaissances, s'ils sont surveillés ou
qu'ils ont reçu des informations suffisantes concernant
l'utilisation de l'appareil en toute sécurité, et s'ils comprennent
les dangers en présence.
• Les enfants ne doivent pas jouer avec l'appareil.
• Le nettoyage et l'entretien courant ne doivent pas être
effectués par des enfants sans surveillance.
• Tenir l'appareil et le cordon d'alimentation hors de portée des
enfants.
• Cet appareil est conçu pour être utilisé dans des applications
domestiques et similaires, telles que les fermes, par les
clients dans des hôtels, motels et autres environnements
de type résidentiel et les environnements de type « bed and
breakfast ».
Il n'est pas adapté à une utilisation en cuisine professionnelle,
que ce soit dans un magasin, un bureau ou tout autre espace
de travail.
g
f
d
e
i
q
∂
t

18
Positionnement
• Positionnez toujours votre appareil loin du bord du plan
de travail.
• Utilisez l'appareil sur une surface solide et plate.
• N'utilisez jamais l'appareil dehors ou près d'une source
d'eau.
• DANGER : Ne placez pas l'appareil sur un plateau en
métal ou sur une surface métallique pendant qu’il
fonctionne.
Cordon d'alimentation secteur
• Ne laissez jamais le cordon d'alimentation dépasser
du bord d'un plan de travail, à un endroit où un enfant
pourrait l'atteindre.
• Ne laissez jamais le cordon d'alimentation traverser un
espace accessible, par exemple entre une prise murale
basse et une table.
• Ne laissez jamais le cordon d'alimentation passer sur
une cuisinière ou toute autre surface chaude qui pourrait
l'endommager.
• Positionnez l'appareil de manière à ce que le cordon
d'alimentation puisse atteindre une prise électrique sans
forcer sur les connexions.
• Si le cordon d'alimentation est endommagé, il doit être
remplacé par le fabricant, un agent de son service après-
vente ou une personne qualifiée afin d'éviter tout risque.
Sécurité personnelle
• DANGER : Pour vous protéger des risques d'incendie,
de choc électrique et de blessure, ne plongez pas le
cordon d'alimentation, la fiche électrique ou l'appareil
dans l'eau ou dans d'autres liquides.
• Débranchez l'appareil du secteur avant de le nettoyer.
• Laissez-le refroidir avant de monter ou de démonter des
pièces et avant de le nettoyer.
Autres points relatifs à la sécurité
• N'utilisez pas d'accessoires ni d'outils non recommandés
ou commercialisés par Morphy Richards car ils pourraient
entraîner un incendie, un choc électrique ou des
blessures.
• Utilisez l'appareil uniquement pour faire bouillir de l'eau.
• Ne posez pas l'appareil sur une plaque de cuisson
électrique ou à gaz chaude ou dans un four chauffé, ni à
proximité immédiate de ces appareils.
• Le réservoir d'eau ne doit pas être placé dans l'unité
principale lorsque vous le remplissez d'eau.
• Débranchez l'appareil du secteur lorsque vous ne l'utilisez
pas.
• DANGER : Ne pas immerger l'appareil dans l'eau pour
le nettoyer.
ATTENTION : Pour éviter toute détérioration de l'appareil,
n'utilisez pas de produits de nettoyage alcalins. Utilisez
un chiffon doux et un détergent.
Exigences relatives à l'électricité
• Vérifiez que la tension indiquée sur la plaque signalétique
de l'appareil correspond à l'alimentation électrique de
votre domicile, qui doit être en courant alternatif (CA).
• Si le fusible de la prise secteur doit être changé, utilisez
un fusible de remplacement BS1362 de 13 A.
DANGER : Cet appareil doit être mis à la terre.

Filtration BRITA
Filtrer l'eau améliore le goût et l'aspect des boissons en
éliminant le tartre, le plomb, le chlore et d'autres impuretés.
La cartouche filtrante BRITA MAXTRA offre une filtration
améliorée grâce à la technologie MAXTRA. Le Micropore
Filter naturel et le puissant Protect Filter réduisent le chlore et
le tartre pour une eau au goût agréable et réduisent également
les métaux tels que le plomb et le cuivre. Le contrôle du
débit unique garantit une durée de filtration parfaite pour de
meilleurs résultats.
Pour obtenir une filtration maximale et un goût optimal, il est
important de changer la cartouche filtrante BRITA MAXTRA
régulièrement. BRITA conseille de remplacer la cartouche
toutes les 4 semaines.
L'utilisation du système de filtration BRITA est facultative. Si
vous ne souhaitez pas utiliser le système de filtration, retirez
simplement la trémie BRITA (21) et la cartouche filtrante
MAXTRA (19) du réservoir d'eau (7).
Il faut compter environ 4 minutes pour filtrer 1,5 litre d'eau
avec le système de filtration BRITA. Vous pouvez utiliser le
système pendant la filtration, à condition qu'une quantité
suffisante d'eau ait été filtrée dans le réservoir d'eau.
Installation d'une cartouche
BRITA MAXTRA 1
1 Déballez la cartouche BRITA MAXTRA (19) et plongez-la
dans l'eau en la secouant légèrement pour libérer les
éventuelles bulles.
2 Mettez en place la cartouche BRITA MAXTRA en la
poussant dans la trémie BRITA.
3 Placez la trémie BRITA dans le réservoir d'eau.
Avant de remettre le réservoir d'eau dans l'unité
principale, remplissez la trémie BRITA d'eau froide et
laissez l'eau filtrer par la cartouche BRITA MAXTRA. Jetez
l'eau filtrée. Répétez cette étape deux fois.
4 Remplissez la trémie BRITA d'eau fraîche et replacez le
réservoir d'eau dans l'unité principale. Votre cartouche
BRITA est maintenant prête à l'utilisation avec votre
distributeur d'eau chaude.
Mémo BRITA 2
Le Mémo BRITA (20) mesure la durée recommandée
d'utilisation de votre cartouche filtrante MAXTRA (19). Le
Mémo BRITA se situe sur le dessus de la trémie BRITA (21).
Pour réinitialiser le Mémo BRITA, appuyez sur le bouton
Démarrer du Mémo et maintenez-le enfoncé jusqu'à ce que
les quatre barres apparaissent sur l'affichage et clignotent
deux fois. Le voyant de cartouche active situé en bas à
droite du Mémo BRITA indique que la cartouche est en
fonctionnement. Après quatre semaines, les quatre barres
disparaîtront et une flèche clignotante indiquera que la
cartouche doit maintenant être changée. Après avoir changé
la cartouche, réinitialisez le Mémo.
Remplacement du
Mémo BRITA
Le Mémo BRITA (20) a une durée de vie d'environ 5 ans.
Pour retirer le Mémo BRITA usagé, placez un tournevis dans
l'encoche voisine et poussez pour l'extraire. Veuillez noter
que le Mémo BRITA ne doit pas être retiré sauf pour son
remplacement.
D'autres informations sur l'utilisation des cartouches filtrantes
BRITA et le Mémo BRITA sont disponibles dans le guide
d'information BRITA fourni avec votre distributeur d'eau
chaude.
Appelez notre service de pièces détachées (0844 873 0726)
pour commander un Mémo BRITA neuf. Pour toutes questions
concernant les produits BRITA et la filtration de l’eau :
Rendez-vous sur notre site internet www.brita.fr rubrique
Service consommateurs/demande de contact, Tel. 0810 -
731545 (Lu. - Ve. de 09h30 - 12h30 - Prix d’un appel local,
(surcoût possible depuis un mobile).
g
f
d
e
i
q
∂
t

20
Caractéristiques
1 Bouton Marche/Arrêt
Démarre et arrête le processus de chauffage. Peut également être
utilisé pour arrêter la distribution au cours du fonctionnement et
mettre le distributeur d'eau chaude en mode veille.
2 Molette de commande du volume d'eau
Commande le volume d'eau à chauffer et distribuer. Le volume
s'affiche sur l'écran LCD (15).
3 Écran LCD
Affiche les volumes, les températures, les fonctions et les
avertissements.
4 Bouton Température
Règle la température de l'eau distribuée, active et désactive les
sons.
5 Bouton Distribution
Active et désactive la fonction de Distribution automatique.
6 Buses de distribution
7 Réservoir d’eau
Contient la cartouche BRITA MAXTRA 19, le Mémo BRITA 20 et la
trémie BRITA 21.
8 Bac récupérateur
9 Couvercle du bac récupérateur
10 Voyant du bac récupérateur
L'icône « Plein » indique lorsque le bac récupérateur doit être vidé.
11 Icône chauffage
Affiche lorsque le cycle de chauffage est en cours.
12 Icône réservoir d'eau
Affiche lorsque le réservoir doit être rempli.
13 Icône distribution
Affiche lorsque l'eau est prête à être distribuée.
14 Icône distribution automatique
Affiche lorsque la fonction de distribution automatique est activée.
15 Afficheur du volume de distribution
Affiche le volume d'eau à chauffer et distribuer.
16 Icône détartrage
S'affiche lorsque le distributeur d'eau chaude a besoin d'un
détartrage.
17 Icône température
Affiche la température à laquelle l'eau sera chauffée avant la
distribution.
18 Voyant de veille
19 Cartouche BRITA MAXTRA
20 MÉMO BRITA
Surveille la durée de vie de la cartouche MAXTRA.
21 Trémie BRITA
22 Capteur de niveau d'eau
23 Unité principale
Utilisation du distributeur
d'eau chaude
Avant d'utiliser votre distributeur d'eau chaude, ou s'il
n'a pas été utilisé depuis plus d'une semaine, suivez ces
instructions pour faire bouillir la quantité d'eau
maximale,
puis jetez-la pour vous assurer que le système est bien
rincé.
Les instructions détaillent les étapes à suivre pour utiliser
votre distributeur d'eau chaude. Pour l'installation du système
de filtration BRITA, reportez-vous à la section « Installation
d'une cartouche BRITA MAXTRA ».
Filtration de l'eau par la BRITA Maxtra
La cartouche prend environ 4 minutes pour 1,5 l. Assurez-
vous qu'une quantité d'eau suffisante ait été filtrée et soit
prête à l'utilisation dans le réservoir d'eau avant de chauffer.
3 Si nécessaire, suivez les étapes 1 à 6 de la section
« Réinitialiser le système » pour réinitialiser le système.
Ensuite, jetez l'eau. Si le distributeur d'eau chaude est en
mode veille, appuyez sur n'importe quel bouton pour le
réactiver.
4 Retirez le bac récupérateur (8) de l'unité principale (23) (si
nécessaire).
5 Placez le récipient voulu (tasse, casserole, bol, etc.)
sous les buses de distribution (6). Un ou deux récipients
peuvent être remplis en même temps pendant chaque
cycle de distribution à condition qu'ils soient de la même
taille.
6 Réglez la température de l'eau en appuyant sur le bouton
Température (4) pour faire défiler les options (85, 95 et 100
°C). La température de l'eau s'affichera à l'écran (17).
7 Tournez la molette de volume d'eau (2) pour ajuster
le volume de distribution (15). Votre distributeur d'eau
chaude peut chauffer entre 150 ml et 1,5 l d'eau par cycle.
8 Vous pouvez distribuer automatiquement des volumes
d'eau de 600 ml et moins. Pour activer ou désactiver
cette fonction, appuyez sur le bouton Distribution (5).
Cette fonction ne peut pas être sélectionnée pour des
volumes supérieurs à 600 ml. Ceux-ci doivent être
distribués manuellement.
9 Appuyez sur le bouton Marche/Arrêt (1) pour enclencher
le chauffage. Votre distributeur d'eau chaude émettra un
son et le cycle de chauffage débutera. Une fois le cycle
démarré, le volume et la température peuvent uniquement
être modifiés pendant les premières secondes du cycle
de chauffage.