Morphy Richards IB21013 User manual

Instructions
Twist & lift TM Salon professional 1800w hairdryer
Model 21013 with unique twist & lift motorised oscillator attachment

Thank you for buying your new Morphy Richards, Mark Hill 1800w hairdryer. Please read
these instructions carefully before use and keep in a safe place for future reference.
Key Features
2
Includes
• 3 metre salon length cable for flexibility and ease of use
• Rubberised grip to make styling more comfortable
• 4 velcro rollers adds volume and bounce, 25mm thermal bristle brush,
4 sectioning clips
Motorised twist & lift oscillator
attachment to create volume and movement
Adjustable concentrator
nozzle to control styling
Cool shot &
boost button
Twist & lift TM
motor control button
3 heat settings for
controlled styling
Removable air
inlet filter
Hanging loop
for tidy storage
2 speed settings
Comfort grip
Rubber tips for
comfortable styling

Styling Tips
Having shampooed your hair, ensure
that it is rinsed properly as shampoo that is
left in the hair will leave it looking dull.
To maximise shine, rinse your hair in
cool water thoroughly.
Comb your hair through with a wide
toothed comb to remove tangles before
styling.
Attachments
When using the twist and lift TM
attachment, use of a high heat/speed
setting may cause the automatic thermal
protection cut-out to operate and the
hairdryer will stop. Should this occur, switch
off the hairdryer and remove the plug from
the power socket. Allow to cool, the cut-out
will automatically reset, you can then
continue to dry your hair using a lower
speed.
Cool shot & boost button
Set your style in place with a flow of
cool air or use a boost of heat for quicker
styling.
Styling
Using the concentrator nozzle
Unclip nozzle for normal use.
The concentrator nozzle may also be
adjusted to allow more control over styling.
3
If you are blow drying curly hair into a
straight style, you need to concentrate the air
down into the shaft of the hair. Close the
unique adjustable nozzle up into the
narrowest position.
If you want to add more volume and
movement throughout the hair, open the
nozzle to its widest position.
Using the twist & lift TMattachment
Ensure the hair is dried thoroughly before
you attempt to lift the roots. To add volume
and lift, remove the concentrator nozzle if
attached and attach the twist and lift
motorised attachment. Toss the hair forwards
to loosen, then with the dryer on the desired
setting, place against the head, with the tips
of the rods touching the scalp and press the
twist and lift button, to move the dryer in an
oscillating motion.
Removable air inlet grille
The air inlet ensures that clean air is used
to dry your hair. To remove the air filter,
ensure that the hairdryer is unplugged from
the mains supply. Hold the hairdryer body
firmly then pull the air filter off. The air filter
will detach from the hairdryer. Take out the
filter to clean away hair and lint using a
vacuum cleaner or wash the filter in warm
soapy water should it become really dirty. Be
sure to let the filter dry properly before
refitting to the hairdryer. To refit push the
filter until it fits into position.

Important Safeguards
When using your hair appliance, basic
safety precautions should always be
followed.
1Read all instructions carefully.
2Use the appliance for its
intended use only.
3To protect against the risk of
electric shock, do not immerse
the appliance in water or in any
other liquids.
4It is recommended that this
appliance should not be used by
children.
5Be sure that your household
voltage corresponds to the
voltage marked on the hairdryer.
6Always unplug your appliance
when it is not in use.
7Do not leave the hairdryer
switched on whilst unattended.
8Do not take this product into a
bathroom or use near a water
basin.
9In the event of cable damage do
not attempt to replace the
mains cable, return to morphy
richards.
10 After use do not store until the
product has cooled down.
11 Do not place the hairdryer on
surfaces likely to be easily
damaged by the heat.
12 Ensure the filter is cleaned regularly.
4

Wiring
This product is fitted with a 13A (BS1363)
plug. A 13 amp fuse (BS1362) must be used.
Check that the voltage on the rating
plate of your appliance corresponds with
your house electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your home are
not suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED
FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH
BARED FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.
Mains Lead
As a safety precaution and to prolong the life
of your appliance, do not wrap the mains lead
around the appliance as this will cause
damage.
5

Morphy Richards products are intended for household use only. Morphy Richards has a policy of
continuous improvement in product quality and design. The Company, therefore, reserves the right to
change the specification of its models at any time.
446/8001/35 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two Year Guarantee
It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model
number if the product develops a fault. This number can be found on the handle of the product.
All Morphy Richards products are individually tested before leaving the factory. In the unlikely
event of any appliance proving to be faulty within 28 days of purchase it should be returned to the
place of purchase for it to be replaced.
If a fault develops after 28 days and within 24 months of original purchase, you should contact the
helpline number quoting the model number of the product, or write to the address below. You will
be asked to return the product (in secure packaging) to the address below along with a copy of
proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK (local rate) 08450 777700,
Republic of Ireland 1800 409119
Morphy Richards Website www.morphyrichards.co.uk