Morphy Richards IB21022 User manual

Morphy Richards products are intended for household
use only. Morphy Richards has a policy of continuous
improvement in product quality and design. The
Company, therefore, reserves the right to change the
specification of its models at any time.
PC21022M UK Rev 1
Two Year Guarantee
It is in your interest to retain the retailers receipt as
proof of purchase. Please quote the model number
if the product develops a fault. This number can be
found on the handle of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of
any appliance proving to be faulty within 28 days of
purchase it should be returned to the place of
purchase for it to be replaced.
If a fault develops after 28 days and within 24 months
of original purchase, you should contact the helpline
number quoting the model number of the product,
or write to the address below. You will be asked to
return the product (in secure packaging) to the
address below along with a copy of proof of
purchase.
The After Sales Division
Registered address
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri)
UK 0870 060 2614
Replacement parts 0870 167 6645,
Republic of Ireland 1800 409119
Morphy Richards Website
www.morphyrichards.co.uk
Wiring
This product is fitted with a 13A (BS1363) plug.
A 13 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for
the plug supplied with this appliance the plug should be
removed and the appropriate one fitted.
WARNING: The plug removed from the
mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a live
socket outlet.
Mains Lead
As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.
2000w Salon hairdryer
with concentrator nozzle
MODEL : 21022
Instructions & Style Guide

Thank you for buying your new 2000w Essential
hairdryer from Morphy Richards. Please read these
instructions carefully before use and keep in a safe
place for future reference.
Key Features
A 3 heat settings.
B 2 speed settings for fast controlled drying.
C Concentrator nozzle for accurate styling.
D Cool shot to set style in place.
E Removable air filter for easy cleaning.
F Hanging loop for easy storage.
G Non slip rubberised finish.
•Salon length cable.
Important safeguards
When using your hair appliance, basic safety
precautions should always be followed.
1Read all instructions carefully.
2Use the appliance for its intended use only.
3To protect against the risk of electric shock, do
not immerse the appliance in water or in any
other liquids.
4Be sure that your household voltage corresponds
to the voltage marked on the dryer.
5The air inlet grille should not be obstructed
when the hairdryer is in use.
6Always unplug your appliance when it is not
in use.
7It is recommended that this appliance should
not be used by children.
8Do not leave the hairdryer switched on whilst
unattended.
9 Do not use in a bathroom.
Styling
Towel dry hair before using the hairdryer.
Styling tips
Your hairdryer is one of the most important beauty aids
you own, and the way you use it has a significant
impact on the look and condition of your hair.
Having shampooed your hair, ensure that it is rinsed
properly as shampoo that is left in the hair will leave it
looking dull.
To maximise shine, rinse your hair in cool water when
you have rinsed it thoroughly, comb your hair through
with a wide toothed comb to remove tangles before
styling.
When drying your hair smooth, make sure each section
is completely dry before moving onto the next or your
hair will kink or frizz.
The concentrator attachment allows you to direct heat
for smooth styling.
For drying
Set the dryer on the highest setting/speed and circulate
airflow through the hair, trying not to concentrate the
airflow on any one section of hair for a long period of
time.
As soon as the hair is almost dry, lower the speed
setting and use a styling brush to shape the hair as
desired.
Set your style in place after drying your hair with a flow
of cool air by pressing the cool shot button.
To clean the air filter - The air filter ensures that only
clean air is used to dry your hair. To remove the air
filter, ensure the hairdryer is unplugged from the
mains supply and clip off the rear cover to reveal the
air filter. Take out the filter to clean away hair and lint
using a vacuum cleaner. To refit locate the air filter
into the filter cover and click back into place.
B
A
C
D
E
F
G