Morphy Richards IB25020 User manual

Morphy Richards products are intended for household
use only. Morphy Richards has a policy of continuous
improvement in product quality and design. The
Company, therefore, reserves the right to change the
specification of its models at any time.
446/8005/11 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two year guarantee
It is in your interest to retain the retailers receipt as proof
of purchase. Please quote the model number if the
product develops a fault. This number can be found on
the base of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of any
appliance proving to be faulty within 28 days of purchase
it should be returned to the place of purchase for it to be
replaced.
If a fault develops after 28 days and within 24 months of
originalpurchase,youshouldcontactthehelplinenumber
quoting the model number of the product, or write to the
addressbelow. You will beasked to return the product(in
securepackaging)totheaddressbelowalongwithacopy
of proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri)
UK 0870 060 2614
Replacement parts 0870 167 6645
Republic of Ireland 1800 409119
Morphy Richards Website
www.morphyrichards.co.uk
Wiring
This product is fitted with a 13A (BS1363) plug.
A 3 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for
the plug supplied with this appliance the plug should be
removed and the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE
MAINS LEAD, IF SEVERED, MUST BE DESTROYED
AS A PLUG WITH BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE SOCKET
OUTLET.
Facial sauna
MODEL : 25020
Instructions
Mains lead
As a safety precaution and to prolong the life of your
appliance, do not wrap the mains lead around the
appliance as this will cause damage.
Cleaning
Ensurethefacialsaunaisdisconnectedfromtheelectrical
socket. Allow the unit to cool down and remove the mask
from the base unit. Pour out excess water from the tank
and wipe the mask with a damp cloth.

Thank you for buying your new Essentials facial sauna
from Morphy Richards. Please read these instructions
carefully before use and keep in a safe place for future
reference.
Key features
1 Translucent mask
2 Mainbody
3 On/off switch with neon indicator
4 Water tank
• Measuringbeaker provided
A Pour water into the water tank to the required level
using the beaker and position facial mask over the
body of the unit.
B Switch the appliance ‘on’.
C Place your face into the facial mask.
D Switch the appliance ‘off’.
E Lift the facial mask from the main unit.
F Pour the remainder of the water out of the tank.
Important safeguards
When using your facial sauna, basic safety precautions
should always be followed.
1 Read all instructions carefully.
2After or during use, do not touch the metal tray
as it becomes extremely hot.
3 Use the appliance for its intended use only.
4 To protect against the risk of electric shock, do not
immerse the appliance in water or in any other
liquids.
5 Be sure that your household voltage corresponds
to the voltage marked on the appliance.
6 Always unplug your appliance when it is not in use.
7 It is recommended that this appliance should not
be used by children as their skin is usually more
sensitive than adults.
8 Do not leave the appliance switched on whilst
unattended.
9 Never overfill the sauna as this will effect the
performance of the unit.
10 The sauna must not be switched on without water.
As soon as the water has evaporated please
switch off before adding more water as desired.
Cautions
1 If the treatment becomes uncomfortable cease the
treatment.
2 The facial sauna is also suitable for teenage skin.
However, where problems are present always
consult your doctor.
3 If you suffer from any kind of skin or respiratory
problems, please consult your doctor before using
the facial sauna.
How to use your facial sauna
The facial sauna will help to keep your skin healthy and
soft as the steam vapours gently clean the skin by
cleansing away impurities.
Before using ensure that the unit is switched off and
unplugged from your electrical socket.
The beaker has two water level indicators for shorter
and longer periods of usage when filled to each level.
Fill the metal tray situated within the sauna base to the
required level with the beaker provided. For quicker
results it is recommended to use warm (not boiling)
water.
Fit the sauna mask over the body of the unit.
Plug your sauna into the electrical socket and switch
on. The neon indicator light will glow to show that the
unit is in the ‘on’ position.
The sauna treatment can commence as soon as the
vapour begins to rise. Inserting your face into the mask
will increase the sauna vapour.
Tips
For the first treatment sauna should only be used for 2-
3 minutes and maximum treatments 6 minutes.
Dry and normal skin will benefit from regular weekly
treatment, but for oily skins two treatments per week
may be desirable.
Before using, thoroughly cleanse your skin. You may
wish to protect your hair with a towel or scarf.
After using your facial sauna wash your face to remove
the impurities that your sauna has drawn out. Use
warm water or your normal cleanser, then rinse with
cold water and pat dry.
For normal or oily skin, tone with a skin freshener and
apply night cream.
4
1
23