Mosaic 155507 Owner's manual

6 Piece Folding Dining Set
155507
Customer Service: [phone]
7:00 am to 12:00 am CST (daily)
Live Chat at: www.academy.com
Email: [e-mail]
----------------------OR--------------------
[phone] 8:30am to 5:30pm Monday thru Friday, EST
(Made in China)
Please keep this instruction manual for future reference
Assembly Instructions
& User’s Manual

Table of Contents
Page 1 of 9
Warnings………………………………………………………………..…1
Tools, Parts and Hardware……………………………………………...2
Assembly Instructions………………………………………………….3-8
Care and Maintenance……………………………………………...…. 9
Warranty Information………………………………………..................10
Warnings
• Weight Limit Chair: 250Lb
• Weight Limit Table: 100 Lb
• Ensure that all parts are securely fastened and that all nuts and
bolts are fully tightened before use.
Note: Before beginning assembly of product, make sure all parts
are present. Compare parts with package content list and contents
on next page. If any part is missing or damaged do not attempt to
assemble the unit. Contact customer service for replacement parts.
Sku: 113386579
Style#: 155507

1 Allen Wrench ( included)
2 Wrench ( included)
3 Phillips Screwdriver
( not included)
Tools Required
Parts List
Hardware
A Table Top 1
B Table Leg 4
C Center Ring 1
D M6x50 Bolt 4
E M6x35 Bolt 4
F Nut 8
H Screw 4
Page 2 of 9

Assembly Instructions
Step 1:
Place the Table Top (A) on a soft and non-abrasive
surface, remove all packing material. Attach table
Legs (B) into each corner bracket on the Table Top
(A). Attach all the legs with screws (H) using a
philips screwdriver (3).
Step 2:
Attach the Center Ring (C) to the legs with M6 x 50
Bolts (D) and Nut (F).
Further secure the table with Bolts (E) and Nut (F).
Tighten with Allen Wrench (1) and Wrench (2) after
all the bolts are in position and hand tightened,
then turn the table upright.
Page 3 of 9

Assembly Instructions
Step 3:
Turn the table upright.
Step 4:
Pull out the chair and remove the packaging
Page 4 of 9

Assembly Instructions
Step 5:
open the chair according to the right figure.
Step 6:
Pull the back till fully open
Page 5 of 9

Assembly Instructions
Step 7:
Pull out the umbrella and remove the packaging.
Hold the upper umbrella pole and insert into the
bottom pole.
Lock the pole according to the figure on the right.
Step 8:
Hand open the umbrella by pushing upwards until
the button locks in place.
Page 6 of 9

Assembly Instructions
Step 9:
Umbrella setup finish.
Page 7 of 9
Press the button and pull the umbrella downwards,
and pull the lock upwards according to the right
figure.
Step 10:

Assembly Instructions
Step 11:
Page 8 of 9
Pull the up pole out of the bottom pole.
Care and Maintenance
This patio set should be cleaned on a regular basis to promote
safe use and prolonged product life.
Wipe the frame with a smooth damp cloth and air dry.
Do not use abrasive cleaners as they may damage or scratch the
surface paint. Do not leave this product in severe weather
conditions for extended periods. For extended life, the patio set
should be stored indoors or covered during prolonged periods of
non-use. Storing in a dry location will help prevent rust.

Warranty Information
Page 9 of 9
This product has been manufactured under the highest
standards of quality and workmanship. We warrant to the
original consumer purchaser that all aspects of this product will
be free of defects in material and workmanship for one year
from the date of purchase. A replacement for any defective
part will be supplied free of charge for installation by the
consumer. Defects or damage caused by the use of other than
genuine parts are not covered by this warranty. This warranty
shall be effective from the date of purchase as shown in the
purchaser receipt.
This warranty is valid for the original consumer purchaser only
and excludes industrial, commercial or business use of the
product, product damage due to shipment or failure which
results from alteration, product abuse, or product misuse,
whether performed by a contractor , service company , or
consumer. We will not be responsible for labor charges and/or
damage incurred in installation, repair or replacement nor for
incidental or consequential damage.