Zaer ZR820302 User manual

ITEM NO.: ZR820302 IRON GARDEN SWING BENCH
BOX 1 OF 2
A: Seat and Back B: Arm
(Left + Right )
C: Chain D: Bar on top E: Bar on back F: Hook G: Bolt
(10X100mm)
1 PC ( 1 each side)
2 PCS (Long+Short=Set) 2 SETS 1 PC 1 PC 2 PCS 4 PCS
H: Bolt
(10X40mm) I: Nut
(10mm) J: Nut (8mm) K: Nail L:Wrench
4 PCS 14 PCS 6 PCS 4 PCS 2 PCS
BOX 2 OF 2
M:Bottom Panel N:Top Panel
2 PCS 2 PCS
ASSEMBLY INSTRUCTIONS
Please read instruction thoroughly before assembling the swing bench.
Familiarize yourself with inventory of parts and the accompanying illustrations to assure safe and proper assembly.
Parts List

G (4 PCS)
H (4 PCS)
I (14 PCS)
Step 1: Fix top panel (N ) on bottom panel (M) for both sides, Step 2: Fix bar (D) on top and bar (E) on back to the frame.
keep nail hole on bottom panel (M) toward outside.
F (2 PCS)
J (6 PCS)
K
keep this way
Step 3: Fix left and right arms (B) to seat and back (A) , Step 4: Hang hook (F) on the top frame,hang chain (C) and seat (A)
fix chain (C) to arm (B),keep longer one in front. onto the hook (F);Fix nail (K)x4 to ground.
IMPORTANT: Check all hardware for tightness before and during use
The assembly requires 2 people and will take approximately 20 minutes
Clean with damp/dry cloth; use clear protective overspray (ex. Rustoleum) for
added protection against potential fading and/or weatherization
Visit www.ZaerLTD.com to shop our entire selection of wholesale home & garden decor
STEPS
Zaer Ltd. products have a 30 day warranty that begins once product
is delivered. Questions/Comments: Call 215-766-2010 or email
[email protected].
Use and Care:
Safe for both indoor and outdoor use; year round
Seats up to two (2) people; approx. 600lbs
no this way
Zaer Ltd. International Warranty
not this way