Mosaic FSMVPT3009 User manual

Grill Gazebo
Please keep this instruction manual for future reference
Assembly Instructions
& Users Manual
BRAND
FSMVPT3009
ustomer Service: [phone], 8:00am to 12:00am, ST
Live hat @ Academy.com: 24/7
----------------------OR---------------------
ustomer Service: [phone], 8:30am to 5:00pm, PST, (11:30am to
8:00pm, ST), Monday thru Friday
(Made in hina)

Warnings………………………………………………………………….2
Tools and Hardware……………………………………………………..3
Parts List……………..…………………………………………………...4
Assem ly Instructions………………………………………………..5-10
Care and Maintenance……………………………………………........11
Warranty Information………………………………………..................11
Table of ontents
Note: Before eginning assem ly of product, make sure
all parts are present. Compare parts with package content
list, hardware, and parts list on page 3 & 4. If any part is
missing or damaged do not attempt to assem le the unit.
Contact customer service for replacement parts.
Page 1 of 11

Warnings
•Assem le the Gaze o on a soft, non-a rasive surface
such as grass to avoid damage.
•This product is not intended for use during inclement or
severe weather, that includes ut is not limited to rain, hail,
sleet, snow, wind, freezing conditions and extreme heat.
•When not in use, store and/or cover the product in a cool
dry location.
•Do not use the product as a support. Do not shake, lean or
clim on the Gaze o.
•Children under the age of 16 should not e engaged in
assem ly, removal or disassem ly. Children under the age
of 10 should e supervised y a competent adult when
near the gaze o.
•This product is for residential use only. This product is
NOT intended for commercial use and misuse will void the
warranty.
•Item is heavy. Handle with care.
•May require two adults for safe assem ly.
•Keep all flame and heat source away from this canopy
fa ric. This canopy meets the flamma ility requirement of CPAI-84. The
fa ric may urn if left in continuous contact with any flame source. The
application of any foreign su stance to the canopy fa ric may render the
flame-resistance properties ineffective.
•Weight limit: 75l s (34.02kg) for each Bar counter top
Page 2 of 11

VPhilips screwdriver (Included)
WAllen wrench (Included)
XWrench (Included)
Tools Required
Hardware
QST5 * 10mm Self-tapping screw 16
RM6 * 20mm Wing olt 12
SM6 * 30mm Wing olt and nut 4
TUpper tu e olt 4
UGaze o anchor kit 8
Page 3 of 11

Parts List
ASupport post 1 2
BSupport post 2 1
CSupport post 3 1
DPanel 12
EPanel 2 2
FUpper canopy corner
pole
4
GBar counter top 2
HCenter support hu 1
IU-shaped racket 4
JBottle opener 1
KCap plate 4
LPost ase 4
MSmall canopy 1
NLarge canopy 1
OBar hook 6
PTop hook 1
Page 4 of 11

Assembly Instructions
Step 1:
1) Attach U-shaped racket (I) to the top of
Support post 1 (A) using Upper tu e olt (T).
Repeat this step for Support post 2 (B) and
Support post 3 (C). So that all posts have an
attached U-shaped racket.
2) Insert Support post 1 (A) into Cap plate (K), y
moving it a ove the hole of Support post 1 (A), and
then insert Post ase (L) into Support post 1 (A),
ensure that the ta on the Post ase (L) pops into
the secure hole on Support post 1 (A), then cover
Cap plate (K) on Post ase (L).
Repeat this step for Support post 2 (B) and
Support post 3 (C).
Step 2:
Insert Panel 1 (D) into Support post 1 (A) and
Support post 2 (B), then secure the Support post 1
(A), Support post 2 (B) and Panel 1 (D) using 2 X
M6 * 20mm Wing olts (R).
Page 5 of 11

Assembly Instructions
Step 3:
Insert the Panel 1 (D) into Support post 1 (A) and
Support post 3 (C), then secure the Support post 1
(A) , Support post 3 (C) and Panel 1 (D) using 2 X
M6 * 20mm Wing olts (R).
Step 4:
Insert the Panel 2 (E) into Support post 1 (A) and
Support post 2 (B), then secure the Support post 1
(A) ,Support post 2 (B) and Panel 2 (E) using 2 X
M6 * 20mm Wing olts (R).
Repeat a ove step for another side of Support
post 1 (A) and Support post 3 (C).
Page 6 of 11

Assembly Instructions
Step 5:
Attach the Bar hooks (O) to Bar counter top (G)
using 12 X Self-tapping screws (Q) for oth sides
of Bar counter top (G) .
Step 6:
1) Insert Bar counter tops (G) into Support post 1
(A) and Support post 2 (B). Secure the Bar counter
top (G) to Support post 1(A) and Support post 2
(B) using 4 X M6 * 20mm Wing olt (R).
Repeat a ove step for another side of Support
post 1 (A) and Support post 3 (C) .
2) Attach the Bottle opener (J) to Support post 3
(C) using 4 X Self-tapping screw (Q).
Page 7 of 11

Assembly Instructions
Step 7:
1) Insert Upper canopy corner poles (F) into the
Center support hu (H).
2) Screw the Top hook (P) into the Center support
hu (H).
Step 8:
Place large canopy (N) onto the assem led Upper
canopy corner pole (F).
Page 8 of 11

Assembly Instructions
Step 9:
Place the small canopy (M) onto the assem led
Upper canopy corner pole (F) and then attach the
four corners of small canopy (M) to Upper canopy
corner pole(F) gently.
Step 10:
Attach four corners of assem led Upper canopy
corner pole (F) and U-shaped racket (I) using 4 X
M6 * 30mm Wing olt and nuts (S).
Page 9 of 11

Assembly Instructions
Step 11:
1) Attach the four corners of large canopy (N) to
Upper canopy corner pole (F) gently.
2) Move the Cap plate (K) a ove the hole of
Support post 1 (A), then insert Gaze o anchor
kits(U) into the holes of Post ase (L).
Repeat a ove step for Support post 2 (B) and
Support post 3 (C).
Page 10 of 11

are and Maintenance
•For est results, clean the frame with a damp cloth and
dry thoroughly. This will help prevent mildew y removing
dirt particles that may accumulate.
•Do not use a rasive materials or cleaners.
•In order to prolong the use of the product, do not use
during inclement weather (rain, hail, sleet, snow, wind,
fire, extreme heat and freezing conditions). The product
should e stored in a dry, sheltered place.
•Use the Gaze o anchor kit to secure Gaze o. Additional
Grounding anchors may e needed.
Warranty Information
This Product has een manufactured under the highest standards of
quality and workmanship. We warrant to the original consumer
purchaser that all aspects of this product will e free of defects in
material and workmanship for one year from the date of purchase. A
replacement for any defective part will e supplied free of charge for
installation y the consumer. Defects or damage caused y the use
of other than genuine parts are not covered y this warranty. This
warranty shall e effective from the date of purchase as shown in the
purchaser receipt.
This warranty is valid for the original consumer purchaser only and
excludes industrial, commercial or usiness use of the product,
product damage due to shipment or failure which results from
alteration, product a use, or product misuse, whether performed y a
contractor, service company, or consumer. We will not e
responsi le for la or charges and/or damage incurred in installation,
repair or replacement nor for incidental or consequential damage.
Page 11 of 11