MotionGrey Motion Series User manual

Motion Series - Standing Desk
Assembly Instruction

CAUTION / INFORMATION
USE / LIABILITY
Check that there are no obstacles in the desk's way.
Ensure the desk is not touching any walls.
Make sure the cords are long enough for height adjustments.
This height-adjustable desk features electric motors and is intended for use exclusively in dry work areas.
The desk height is adjustable to provide the most ergonomically suitable position.
Using it for any other purpose is at the user's own risk.
The manufacturer does not accept warranty claims or liability claims for damages resulting from improper
use or handling of the desk frame under any circumstances.
IMPORTANT: Please carefully review this manual. If this desk is sold,
please provide this manual to the new owner.
Pinch Point
Keep hands and
fingers clear.
Please ensure that children are kept away from thw electric height-adjustable desks,
control units, and handsets to prevent the risk of injury and electric shock.
Do not open any of the components - the legs, control box, or switch. There is a danger
of electric shock.
Avoid exposing any electrical components to liquids.
Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.
Do not place any objects taller than 20” underneath the desk.
In the event of a power outage or if the power cord is unplugged, a manual reset
may be necessary - see USE section.
This product is designed with a duty cycle of 10% (2 minutes on, 18 minutes off).
Scan to access the step-by-step
installation instructions and video.
1

2
ASSEMBLY
Note: Use the M5*16 wood screws to attach
the Handset, Control Box, and Desktop.
ACCESSORY LIST
PARTS LIST
NO. QTYCONTROL BOX
NO. QTYSIDE BRACKET
NO. QTYCROSSBAR
NO. QTYKEYPAD
NO. QTYPOWER CABLE
NO. QTYLIFTING COLUMN
NO. QTYFOOT
❶
❷
❸
❹
❺
❻
❼
M5x16 M6x10 M6x16
TOOL
5mm
Allen Key

❶
❸
❷
Separate the frame ends from the center rail inside.
Insert the frame end into the leg part, and then use the Allen
key to insert and tighten the four M6x10 screws.
Slide the side bracket into the frame
end. Insert two M6x10 screws
through the holes in the frame end
into the side bracket. Use the Allen
key to tighten the screws.
Repeat the same process for the
other frame end and leg assembly.
M6x10
5mm
Allen Key
M6x10
5mm
Allen Key
3

❹Slide the frame ends into the center rail. Ensure center rail slots face inward.
For each leg assembly, attach a foot using four M6x16
screws and tighten them using the Allen key.
❺
5mm
Allen Key
M6x16
4

❻
M5x16
Make sure the desk base is properly positioned beneath the desktop.
Use six M5x16 screws to secure the frame to the tabletop.
❼Use four screws to secure the keypad and control box to the tabletop.
M5x16
5mm
Allen Key
5

6
❾Carefully turn the assembled desk right-side up and perform a final inspection.
❽Connect the frame cable, keypad cable, and power cable to the control box.