MOTO GUZZI nevada Guide

SERVICE STATION MANUAL
B043105
NEVADA - NEVADA ANNIVERSARIO

SERVICE STATION
MANUAL
NEVADA - NEVADA ANNIVERSARIO
THE VALUE OF SERVICE
As a result of continuous updates and specific technical training programmes for Moto Guzzi products,
onlyMotoGuzziOfficialNetworkmechanicsknowthisvehiclefullyandhavethespecifictoolsnecessary
to carry out maintenance and repair operations correctly.
Thereliabilityofthevehiclealso dependsonitsmechanical conditions.Checkingthevehicle beforeriding
it, its regular maintenance and the use of original Moto Guzzi spare parts only are essential factors!
For information on the nearest Official Dealer and/or Service Centre consult our website:
www.motoguzzi.com
Only by requesting Moto Guzzi original spare parts can you be sure of purchasing products that were
developed and tested during the actual vehicle design stage. All Moto Guzzi original spare parts undergo
quality control procedures to guarantee reliability and durability.
Thedescriptionsandimagesinthispublicationaregivenforillustrativepurposesonlyandarenotbinding.
While the basic characteristics as described and illustrated in this booklet remain unchanged, Piaggio &
C.S.p.A. reserves theright, at anytime and withoutbeing required toupdate this publicationbeforehand,
to make any changes to components, parts or accessories, which it considers necessary to improve the
product or which are required for manufacturing or construction reasons.
Notallversions/modelsshowninthispublicationareavailableinallcountries.Theavailabilityofindividual
versions should be checked with the Official Moto Guzzi sales network.
The Moto Guzzi brand is owned by Piaggio & C. S.p.A.
© Copyright 2012 - Piaggio & C. S.p.A. All rights reserved. Reproduction of this publication in whole or
in part is prohibited.
Piaggio & C. S.p.A. Viale Rinaldo Piaggio, 25 - 56025 PONTEDERA (PI), Italy
www.piaggio.com

SERVICE STATION MANUAL
NEVADA - NEVADA
ANNIVERSARIO
This manual provides the main information to carry out regular maintenance operations on your vehicle.
This manual is intended to Moto Guzzi Dealers and their qualified mechanics; several concepts have
been deliberately omitted as they are considered unnecessary. As it is not possible to include complete
mechanical notions in this manual, users should have basic mechanical knowledge or minimum
knowledgeabouttheprocedures involved when repairingmotorcycles.Withoutthisknowledge, repairing
orcheckingthevehicle may be inefficient orevendangerous.Asthe vehicle repair and checkprocedures
are not described in detail, be extremely cautious so as not to damage components or injure individuals.
In order to optimise customer satisfaction when using our vehicles, Moto Guzzi s.p.a. commits itself to
continually improve its products and the relative documentation. The main technical modifications and
changes in repair procedures are communicated to all Moto Guzzi Sales Outlets and its International
Subsidiaries. These changes will be introduced in the subsequent editions of the manual. In case of
need or further queries on repair and check procedures, consult Moto Guzzi CUSTOMER
DEPARTMENT, which will be prepared to provide any information on the subject and any further
communications on updates and technical changes related to the vehicle.
NOTE Provides key information to make the procedure easier to understand and carry out.
CAUTION Refers to specific procedures to carry out for preventing damages to the vehicle.
WARNING Refers to specific procedures to carry out to prevent injuries to the repairer.
Personal safety Failure to completely observe these instructions will result in serious risk of personal
injury.
Safeguarding the environment Sectionsmarked withthis symbol indicate the correctuse of the vehicle
to prevent damaging the environment.

Vehicle intactness The incomplete or non-observance of these regulations leads to the risk of serious
damage to the vehicle and sometimes even the invalidity of the guarantee

INDEX OF TOPICS
CHARACTERISTICS CHAR
SPECIAL TOOLS S-TOOLS
MAINTENANCE MAIN
ELECTRICAL SYSTEM ELE SYS
ENGINE FROM VEHICLE ENG VE
ENGINE ENG
POWER SUPPLY P SUPP
SUSPENSIONS SUSP
CHASSIS CHAS
BODYWORK BODYW
PRE-DELIVERY PRE DE

INDEX OF TOPICS
CHARACTERISTICS CHAR

Rules
Safety rules
Carbon monoxide
If you need to keep the engine running while working on the vehicle, please ensure that you do so in
an open or very well ventilated area. Never run the engine in an enclosed area. If you do work in an
enclosed area, make sure to use a fume extraction system.
CAUTION
EXHAUSTEMISSIONSCONTAINCARBONMONOXIDE, APOISONOUS GASWHICHCANCAUSE
LOSS OF CONSCIOUSNESS AND EVEN DEATH.
Fuel
CAUTION
THE FUEL USED TO POWER INTERNAL COMBUSTION ENGINES IS HIGHLY FLAMMABLE AND
MAY BE EXPLOSIVE UNDER CERTAIN CONDITIONS. IT IS THEREFORE RECOMMENDED TO
CARRY OUT REFUELLING AND MAINTENANCE PROCEDURES IN A VENTILATED AREA WITH
THE ENGINE SWITCHED OFF. DO NOT SMOKE DURING REFUELLING AND NEAR FUEL VA-
POURS, AVOIDING ANY CONTACT WITH NAKED FLAMES, SPARKS OR OTHER SOURCES
WHICH MAY CAUSE THEM TO IGNITE OR EXPLODE.
DO NOT DISPERSE FUEL IN THE ENVIRONMENT.
KEEP OUT OF THE REACH OF CHILDREN
Hot components
The engine and the exhaust system components become very hot and remain hot for some time after
the engine has been switched off. When handling these components, wear insulating gloves or wait
until the engine and the exhaust system have cooled down.
Used engine oil and transmission oil
CAUTION
IT IS ADVISABLE TO WEAR PROTECTIVE IMPERMEABLE GLOVES WHEN SERVICING THE VE-
HICLE.
THE ENGINE OR GEARBOX OIL MAY CAUSE SERIOUS INJURIES TO THE SKIN IF HANDLED
FOR PROLONGED PERIODS OF TIME AND ON A REGULAR BASIS.
WASH YOUR HANDS CAREFULLY AFTER HANDLING OIL.
HAND THE OIL OVER TO OR HAVE IT COLLECTED BY THE NEAREST USED OIL RECYCLING
COMPANY OR THE SUPPLIER.
DO NOT DISPOSE OF OIL IN THE ENVIRONMENT
KEEP OUT OF THE REACH OF CHILDREN
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 7

Brake and clutch fluid
BRAKE AND CLUTCH FLUIDS CAN DAMAGE THE PLASTIC OR RUBBER PAINTED SURFACES.
WHEN SERVICING THE BRAKING SYSTEM OR THE CLUTCH SYSTEM, PROTECT THESE COM-
PONENTS WITH A CLEAN CLOTH. ALWAYS WEAR PROTECTIVE GOGGLES WHEN SERVICING
THESE SYSTEMS. BRAKE AND CLUTCH FLUIDS ARE EXTREMELY HARMFUL FOR YOUR
EYES. IN THE EVENT OF ACCIDENTAL CONTACT WITH THE EYES, RINSE THEM IMMEDIATELY
WITH ABUNDANT COLD, CLEAN WATER AND SEEK MEDICAL ADVICE.
KEEP OUT OF THE REACH OF CHILDREN
Battery electrolyte and hydrogen gas
CAUTION
THE BATTERY ELECTROLYTE IS TOXIC, CORROSIVE AND AS IT CONTAINS SULPHURIC ACID,
IT CAN CAUSE BURNS WHEN IN CONTACT WITH THE SKIN. WHEN HANDLING BATTERY
ELECTROLYTE, WEAR TIGHT-FITTING GLOVES AND PROTECTIVE APPAREL. IN THE EVENT
OF SKIN CONTACT WITH THE ELECTROLYTIC FLUID, RINSE WELL WITH PLENTY OF CLEAN
WATER. IT IS PARTICULARLY IMPORTANT TO PROTECT YOUR EYES BECAUSE EVEN TINY
AMOUNTSOF BATTERYACIDMAY CAUSEBLINDNESS. IF THEFLUID GETSINCONTACT WITH
YOUR EYES, WASH WITH ABUNDANT WATER FOR FIFTEEN MINUTES AND CONSULT AN EYE
SPECIALIST IMMEDIATELY. THE BATTERY RELEASES EXPLOSIVE GASES; KEEP IT AWAY
FROM FLAMES, SPARKS, CIGARETTES OR ANY OTHER HEAT SOURCES. ENSURE ADE-
QUATE VENTILATION WHEN SERVICING OR RECHARGING THE BATTERY.
KEEP OUT OF THE REACH OF CHILDREN
BATTERY LIQUID IS CORROSIVE. DO NOT POUR IT OR SPILL IT, PARTICULARLY ON PLASTIC
COMPONENTS. ENSURE THAT THE ELECTROLYTIC ACID IS COMPATIBLE WITH THE BAT-
TERY TO BE ACTIVATED.
Maintenance rules
GENERAL PRECAUTIONS AND INFORMATION
When repairing, dismantling and reassembling the vehicle, follow the recommendations given below
carefully.
BEFORE DISASSEMBLING COMPONENTS
•Beforedismantling components,remove dirt, mud, dust and foreign bodiesfrom thevehicle.
Use the special tools designed for this bike, as required.
COMPONENTS REMOVAL
•Donot loosenand/or tighten screws and nutsusing pliers or any othertools than the specific
wrench.
•Mark positions on all connection joints (pipes, cables etc.) before separating them, and
identify them with distinctive symbols.
•Each component needs to be clearly marked to enable identification during reassembly.
•Clean and wash the dismantled components carefully using a low-flammability detergent.
•Keep mated parts together since they have "adjusted" to each other due to normal wear.
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 8

•Some components must be used together or replaced completely.
•Keep away from heat sources.
REASSEMBLING COMPONENTS
CAUTION
BEARINGS MUST ROTATE FREELY, WITHOUT JAMMING AND/OR NOISE, OTHERWISE, THEY
NEED TO BE REPLACED.
•Only use ORIGINAL Moto Guzzi SPARE PARTS.
•Comply with lubricant and consumables use guidelines.
•Lubricate parts (whenever possible) before reassembling them.
•When tightening nuts and screws, start from the ones with the largest section or from the
internal ones, moving diagonally. Tighten nuts and screws in successive steps before ap-
plying the tightening torque.
•Always replace self-locking nuts, washers, sealing rings, circlips, O-rings (OR), split pins
and screws with new ones if their tread is damaged.
•When assembling the bearings, make sure to lubricate them well.
•Check that each component is assembled correctly.
•After a repair or routine maintenance procedure, carry out pre-ride checks and test the ve-
hicle on private grounds or in an area with low traffic density.
•Clean all coupling surfaces, oil guard rims and gaskets before refitting them. Smear a light
layer of lithium-based grease on the oil guard rims. Reassemble oil guards and bearings
with the brand or lot number facing outward (visible side).
ELECTRICAL CONNECTORS
Electric connectors must be disconnected as described below; failure to comply with this procedure
causes irreparable damage to both the connector and the wiring harness:
Press the relative safety clips, if applicable.
•Grip the two connectors and disconnect them by pulling them in opposite directions.
•If any signs of dirt, rust, moisture, etc. are noted, clean the inside of the connector carefully
with a jet of compressed air.
•Ensure that the cables are correctly fastened to the internal connector terminals.
•Then connect the two connectors, ensuring that they couple correctly (if fitted with clips, you
will hear them "click" into place).
CAUTION
DO NOT DISCONNECT CONNECTORS BY PULLING THE CABLES.
NOTE
THE TWO CONNECTORS CAN ONLY BE CONNECTED IN ONE DIRECTION: CONNECT THEM
THE RIGHT WAY ROUND.
TIGHTENING TORQUES
CAUTION
IN THE EVENT THAT A SELFBRAKING NUT IS UNSCREWED, IT IS NECESSARY TO REPLACE
IT WITH A NEW ONE.
CAUTION
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 9

REMEMBERTHAT THETIGHTENINGTORQUES FORALL FASTENINGELEMENTSON WHEELS,
BRAKES, WHEEL AXLES AND ANY OTHER SUSPENSION COMPONENTS PLAY A KEY ROLE
IN ENSURING VEHICLE SAFETY AND MUST COMPLY WITH SPECIFIED VALUES. CHECK THE
TIGHTENING TORQUES OF FASTENING ELEMENTS ON A REGULAR BASIS AND ALWAYS USE
A TORQUE WRENCH TO REASSEMBLE THESE COMPONENTS. FAILURE TO COMPLY WITH
THESE RECOMMENDATIONS MAY CAUSE ONE OF THESE COMPONENTS TO LOOSEN OR
EVEN DETACH, CAUSING A WHEEL TO LOCK OR COMPROMISING VEHICLE HANDLING. THIS
MAY LEAD TO FALLS, WITH THE RISK OF SERIOUS INJURY OR DEATH.
Running-in
Runningthe engine in correctly isessential for ensuringengine longevity and functionality. Twistyroads
and gradients are ideal for running in the engine, brakes and suspension effectively. Vary your riding
speed during the running in period. This ensures that components operate in "loaded" conditions and
then "unloaded" conditions, allowing the engine components to cool.
CAUTION
THE CLUTCH MAY EMIT A SLIGHT BURNING SMELL WHEN FIRST USED. THIS PHENOMENON
SHOULD BE CONSIDERED NORMAL AND WILL DISAPPEAR AS SOON AS THE CLUTCH
PLATES GET ADAPTED.
ITIS IMPORTANTTO STRAINENGINECOMPONENTSDURINGRUN-IN, HOWEVER,MAKE SURE
NOT TO OVERDO THIS.
CAUTION
THE FULL PERFORMANCE OF THE VEHICLE IS ONLY AVAILABLE AFTER THE SERVICE AT
THE END OF THE RUNNING IN PERIOD.
Follow the guidelines detailed below:
•Do not fully open the throttle grip abruptly at low engine speeds, either during or after the
running in period.
•During the first 100 Km (62 miles) use the brakes gently, avoiding sudden or prolonged
braking. That is to permit the adequate adjustment of the pad friction material to the brake
discs.
AFTER THE SPECIFIED MILEAGE, TAKE THE VEHICLE TO AN OFFICIAL Moto Guzzi DEALER
FOR THE CHECKS INDICATED IN THE "AFTER RUN-IN" TABLE IN THE SCHEDULED MAINTE-
NANCE SECTION TO AVOID INJURING YOURSELF, OTHERS AND /OR DAMAGING THE VEHI-
CLE.
Vehicle identification
SERIAL NUMBER LOCATION
These numbers are necessary for vehicle registration.
NOTE
ALTERING IDENTIFICATION NUMBERS MAY BE SERIOUSLY PUNISHABLE BY LAW. IN PAR-
TICULAR, MODIFYING THE FRAME NUMBER IMMEDIATELY VOIDS THE WARRANTY.
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 10

This number consists of numbers and letters, as in
the example shown below.
ZGULWE0012MXXXXXX
KEY:
ZGU: WMI (World manufacturer identifier) code;
LW: model;
E00 (V7 Stone), G00 (V7 Special), H00 (V7 Rac-
er): versions;
0: free digit
12: variable year of manufacture (12 - for 2012)
M: production plant (M= Mandello del Lario);
XXXXXX: serial number (6 digits);
CHASSIS NUMBER
The chassis number is stamped on the right hand
side of the headstock.
ENGINE NUMBER
The engine number is stamped on the left side,
close to the engine oil level check cap.
Dimensions and mass
WEIGHT AND DIMENSIONS
Specification Desc./Quantity
Maximum length 2166 mm (85.27 in)
Maximum length (Anniversario) 2210 mm (87.01 in)
Maximum width 805 mm (31.69 in)
Maximum width (Anniversario) 800 mm (31.5 in)
Maximum height (hand grips) 1068 mm (42.04 in)
Maximum height (Except rear view mirrors) (Anniversario) 1120 mm (44.10 in)
Saddle height 770 mm (30.31 in)
Wheelbase 1467 mm (57.75 in)
Minimum ground clearance 209 mm (8.22 in)
Kerb weight 191 kg (421.08 lb)
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 11

Engine
ENGINE
Specification Desc./Quantity
Type traverse-mounted twin-cylinder four-stroke V 90°
No. of cylinders 2
Engine capacity 744 cm³ (45.40 cu.in)
Bore / stroke 80x74 mm (3.14x2.91 in)
Compression ratio 10.4 : 1
Electric Electric starter
Engine idle speed 1350 +/- 100 rpm
Intake valve clearance 0.15 mm (0.0059 in)
Exhaust valve clearance 0.20 mm (0.0079 in)
Clutch dry single-disc clutch with flexible coupling
Lubrication Pressure-fed, controlled by valves and trochoidal pump
Air filter cartridge-type dry filter
Cooling air
Transmission
TRANSMISSION
Specification Desc./Quantity
Gearbox / Type mechanical, 5 speeds with foot lever on the left-hand side of
the engine.
Primary drive with gears, ratio: 16 / 21 = 1 : 1.3125
Gear ratios, 1st gear 11 / 26 = 1 : 2.3636
Gear ratios, 2nd gear 14 / 23 = 1 : 1.6429
Gear ratios, 3rd gear 18 / 23 = 1 : 1.2778
Gear ratios, 4th gear 18 / 19 = 1 : 1.0556
Gear ratios, 5th gear 22 / 25 = 1 : 0.9
Final drive with cardan shaft, ratio: 8 / 33 = 1 : 4.825
Capacities
CAPACITY
Specification Desc./Quantity
Fuel (reserve included) 14 l (3.70 USgal)
Fuel reserve 4 l (1.056 US gal)
Engine oil Oil change and oil filter replacement: 2000 cm³ (122.05 cu.in)
Gearbox oil 1 l (0.26 USgal)
Transmission oil 170 cm³ (10.37 cu.in)
Seats 2
Vehicle maximum load 180 kg (396 lb) (rider + passenger + luggage)
Electrical system
ELECTRICAL SYSTEM
Specification Desc./Quantity
Battery 12V - 12 Ah
Fuses 5 (2) - 10 - 15 (2) - 30 A
Generator (alternator + rectifier) 12V - 350 W
SPARK PLUGS
Specification Desc./Quantity
Standard NGK CPR8EB-9
Alternatively CHAMPION RG6YC
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 12

Specification Desc./Quantity
Spark plug electrode gap 0.6 - 0.7 mm (0.024 - 0.027 in)
Resistance 5 kOhm
BULBS
Specification Desc./Quantity
Low/high beam light (halogen) 12 V - 55 W / 60 W H4
Front daylight running lights 12V - 5W
Turn indicator light 12 V - 10 W (orange RY 10 W bulb)
tail light /stop lights 12 V - 5 / 21 W
Dashboard lighting LED
License plate light 12V - 5W
WARNING LIGHTS
Specification Desc./Quantity
Gear in neutral LED
Turn indicators LED
Fuel reserve LED
High beam light LED
Engine oil pressure LED
Injection check warning light LED
Frame and suspensions
CHASSIS
Specification Desc./Quantity
Type Modular double cradle, high strength steel tubular chassis
Steering rake 27.5°
Trail 138 mm (5.43 in)
SUSPENSIONS
Specification Desc./Quantity
Front hydraulic telescopic fork, Ø 40 mm (1.57 in)
Travel 130 mm (5.12 in)
Rear - V7 Special / V7 Stone swinging arm in die-cast light alloy, 2 shock absorbers with ad-
justable spring preloading
Rear - V7 Racer die-castlightalloy swingarm with 2 adjustable shock absorbers
Wheel travel 100 mm (3.93 in)
SIZES A AND B
Specification Desc./Quantity
Size A 692 mm (27.24 in)
Size B 186 mm (7.32 in)
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 13

Brakes
BRAKES
Specification Desc./Quantity
Front stainless steel floating disc, Ø 320 mm (12.59 in), callipers with
4 different and counteracting plungers
Rear 260 mm (10.24 in) stainless steel disc, floating calliper with two
25.4 mm (1.00 in) diam. pistons
Wheels and tyres
WHEEL RIMS
Specification Desc./Quantity
Type with spokes, for tyres with inner tubes
Front 2.5''x18''
Rear 3" x 16"
TYRES
Specification Desc./Quantity
Front (standard) METZLER LASERTEC
Front (size) 100/90 V18 MC (56V)
Front (inflation pressure) 2.2 bar (220 kPa) (31.90 PSI)
Front (inflation pressure) (Anniversario) 2.5 bar (250 kPa) (36.3 PSI)
Front (inflation pressure with passenger) 2.5 bar (250 kPa) (36.3 PSI)
Rear (standard) METZLER LASERTEC
Rear (size) 130/90 V16 MC (67V)
Rear (inflation pressure) 2.2 bar (220 kPa) (31.90 PSI)
Rear (inflation pressure) (Anniversario) 2.5 bar (250 kPa) (33.6 PSI)
Rear (inflation pressure with passenger) 2.5 bar (250 kPa) (36.3 PSI)
Supply
FUEL SYSTEM
Specification Desc./Quantity
Type Electronic injection (Marelli MIU G3)
Venturi Ø 38 mm (1.50 in)
Fuel Premium unleaded petrol, minimum octane rating of 95
(NORM) and 85 (NOMM)
Tightening Torques
Chassis
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 14

Front side
FRONT SUSPENSION - STEERING
pos. Description Type Quantity Torque Notes
1 Stanchion cap - 2 50 Nm (36.88 lbf ft) -
2 Screw fixing wheel axle to right fork leg M6x30 2 10 Nm (7.37 lbf ft) Tighten using a 1-2-1 se-
quence
3 Screw fixing stanchions to upper and lower
plate M10x40 4 50 Nm (36.88 lbf ft) -
4 Headstock ring nut M25x1 1 7 Nm (5.16 lbf ft) The fork must fall to one
side by itself
5 Headstock bushing M23x1 1 50 Nm (36.88 lbf ft) -
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 15

INSTRUMENT PANEL
pos. Description Type Quantity Torque Notes
1Screwfixinginstrumentpanelto headlampsup-
port M6x10 3 10 Nm (7.37 lbf ft) -
HANDLEBAR AND CONTROLS
Pos. Description Type Quantity Torque Notes
1 Switch fastener screw SWP 5 1+1 1.5 Nm (1.11 lb ft) -
2 Counterweight fixing screw M6 2 10 Nm (7.37 lb ft) Loctite 243
3Screw fastening the clutch control U-bolt to
the semi-handlebar M6x25 2 10 Nm (7.37 lb ft) -
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 16

FRONT BRAKE SYSTEM
pos. Description Type Quantity Torque Notes
1Screw fastening the brake pump U-bolt to the
semi-handlebar M6x25 2 10 Nm (7.37 lb ft) -
2 Front brake calliper fixing screw M10x30 2 50 Nm (36.88 lb ft) -
3Drilled screw for brake fluid pipe on pump and
calliper - 2 25 Nm (18.44 lb ft) -
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 17

FRONT LIGHTS
pos. Description Type Quantity Torque Notes
1 Headlamp fixing screw M8x30 2 15 Nm (11.06 lb ft) -
2 Front turn indicator fixing screw M6 2 5 Nm (3.69 lb ft) -
3 Horn fixing screw M6x16 2 10 Nm (7.37 lb ft) -
4 Headlamp support bracket fixing
screw M10x40 2 50 Nm (36.88 lb ft) -
CARROZZERIA - PARTE ANTERIORE
Pos. Descrizione Tipo Quantità Coppia Note
1 Screw fastening stabiliser plate to fork M8x40 4 15 Nm (11.06 lbf ft) Loctite 243
2 Screw fastening mudguard to stabiliser
plate M6x11 4 10 Nm (7.37 lbf ft) Loctite 243
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 18

FRONT WHEEL
pos. Description Type Quantity Torque Notes
1 Front wheel axle M18x1.5 1 80 Nm (59.00 lbf ft) -
2 Front brake disc fixing screw M8x20 6 25 Nm (18.44 lbf ft) Loctite 243
Central part
NEVADA - NEVADA ANNIVERSARIO Characteristics
CHAR - 19

FRAME
pos. Description Type Quantity Torque Notes
1 Screw fixing tank mounting rubber
blocks to frame M8x14 2 25 Nm (18.44 lbf ft) -
2 Cradle front fixing screw M10x30 4 50 Nm (36.88 lbf ft) -
3 Screw fastening gearbox to frame M10x55 2 50 Nm (36.88 lbf ft) -
4 Pin fixing engine/gearbox to chassis M10x205 1 50 Nm (36.88 lbf ft) -
5Screw fixing exhaust silencer mount-
ing to frame M8x16 4 25 Nm (18.44 lbf ft) Loctite 243
6 Battery supporting plate fixing screw M8x16 4 25 Nm (18.44 lbf ft) -
FRAME CRADLES
pos. Description Type Quantity Torque Notes
1 Screw fixing stand beam to cradle M10x260 1 50 Nm (36.88 lbf ft) -
2 Screw fixing stand beam to cradle M8 1+1 25 Nm (18.44 lbf ft) -
3 Pin fixing engine/gearbox to chassis M10x250 1 50 Nm (36.88 lbf ft) -
4 Screw fastening cradle to frame M10x65 2 50 Nm (36.88 lbf ft) -
Characteristics NEVADA - NEVADA ANNIVERSARIO
CHAR - 20