Moto hint User manual

en
moto hint
let’s get started

1en Charging
Charging
Note: Fully charge your headset
before use.
Wireless Charging
Wired Charging
micro USB
Charge the case and headset by
plugging in the charging cable.
Insert headset and close case to begin
charging. Headset is "on" when
removed from the case. A fully charged
case can recharge your headset twice.

2Wearing en
Wearing
Twist your headset to
make it t comfortably.
Fit
Remove the headset from the case
and carefully place in your ear.
Adjust
Connect and go
Follow voice prompts to
connect to your phone.

3en Talking
Talking
Call / Voice Touch area
Back microphone
Front microphone
Touch to answer/ignore a call
or start voice commands.

4Talking en
Take headset out of ear to:
•Transfer a call to your phone.
•Pause music.
Put headset in ear to:
•Answer an incoming call.
•Transfer a call to headset.
•Restart paused music.
Incoming call
Answer Say “answer” or
touch headset.
Ignore Say “ignore”.
Call options
Voice
command
Touch headset. Say
a command, like
“Call Francis
Martin, mobile”.
Note: This feature
is phone
dependent.
End call Touch headset.
Change
volume
Use your phone.

5en Moto Voice
Moto Voice
Tell your Moto Hint headset what you
want. Get directions, check
voicemail, play your favorite song, or
start a search using Moto Voice.
•If you have Moto Voice on your
phone and have trained it with
your launch phrase, you’re ready
to start using voice control.
•If you need to setup Moto Voice,
go to the Moto application on
your phone.
Note: You'll need the Moto Voice
feature on your Moto X or Droid
phone to use voice control on your
Moto Hint. If your phone doesn't
have Moto Voice, the headset still
supports voice commands (see
page 4).

6Lighting en
Lighting
Headset light indicator
Note: You will hear a prompt when
the battery is low
.
Charge case light indicator
In-ear Off.
Remove
from case
Turns on briefly to
show power to
headset.
Wired charging of case and
headset
Headset in
case
Headset and case
are charging.
Case Case charging.
Light Charge status
Blinks
white
Charging.
Solid white Fully charged.

7en Lighting
Notes:
•To check if charging is complete
open and shut the case.
•Lights turn off to save power.
Headset will continue to charge
until fully charged.
Wireless charging of headset
Headset in
case
Charging.
Light Charge status
Blinks
white
Charging.
Solid white Fully charged
headset.

8Cleaning en
Cleaning
Pull off the ear gel and inspect the
opening for blockages. Remove any
unwanted materials from the
opening. Push the ear gel back on to
the headset.
Second device
Do you use two phones? Or a phone
and a tablet? Connect with both of
them.
1Pair each device with the headset
as normal. You don’t have to turn
off the first device to pair with the
second one, as long as it’s done
within five minutes of turning on
the headset.
2Once paired, to connect with
both devices simply turn them on.
You’ll hear “device (number)
connected” as each device
connects with your headset.
Notes:
•Two phones connected: If you are
on a call and you receive a call on
the other phone. Touch the
headset to answer the second
call. End the second call to return
to first call.
•Two phones connected, not on a
call: Touch the headset to activate
voice recognition on the first
phone. Voice recognition only
works on the first phone.

9en Settings
Settings
Touch and hold the Call / Voice
Touch area of the headset for 8
seconds, and then release. Headset
will announce that it is in the "Settings
Menu". Follow the voice prompts to
turn features on or off:
• Ear detect: Sensor for audio
detect when in ear.
• Moto Voice: Always on voice
detection.
• Voice prompts: Voice dial calls,
and more.
• Caller ID alert: Hear caller ID for
incoming calls.
• Wide-band audio: Use HD Audio
Plus for increased clarity and
richer sound.
• Voice answer: Speak to answer
incoming calls.
• Pass through audio: Allows
ambient sound through headset.
Note: This feature is set to off.
When turned on it will reduce
power, talk and standby times.
• Restore factory settings: Reset
default settings on your headset.
Caution: This erases all pairing
information stored on the
headset.

10 Get what you need en
Get what you need
Support: Visit
www.motorola.com/support or
contact the Motorola Customer
Support Center at: 1-800-331-6456
(United States), 1-888-390-6456
(TTY/TDD United States for hearing
impaired), or 1-800-461-4575
(Canada).
MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. All other product or
service names are the property of their respective
owners.
© 2014 Motorola Mobility LLC. All rights reserved.
Product ID: Moto Hint
QD ID: D023072
Manual Number: 68017721001-D

es
moto hint
comencemos

1es Carga
Carga
Nota: cargue por completo el
audífono antes de usarlo.
Carga inalámbrica
Carga con cable
micro USB
Conecte el cable del cargador para
cargar la carcasa y el audífono.
Inserte el audífono y cierre la carcasa para
comenzar la carga. El audífono se enciende
cuando se retira de la carcasa. Una carcasa
completamente cargada puede recargar el
audífono dos veces.

2Uso es
Uso
Gire el audífono para que se
adapte de manera cómoda.
Calce
Retire el audífono de la carcasa
y colóquelo con cuidado en la oreja.
Ajuste
Conéctelo y listo
Siga las instrucciones de voz para
conectar el teléfono al audífono.

3es Conversación
Conversación
Área táctil para llamada/
comando de voz
Micrófono trasero
Micrófono frontal
Toque para contestar/ignorar una
llamada o iniciar los comandos de voz.

4Conversación es
Quítese el audífono de la
oreja para:
•Transferir una llamada al teléfono.
•Pausar la música.
Llamada entrante
Contestar Say “answer”
(Diga “contestar”)
o toque el
audífono.
Ignorar Say “ignore”
(Di “ignorar”).
Opciones de llamada
Comando
de voz Toque el audífono. Say a command,
like “Call Francis
Martin, mobile”.
(Digauncomando,
como “Llamar a
Enrique Casas,
celular”.)
Nota: esta función
varía según el
teléfono.
Finalizar
llamada Toca el audífono.
Cambiar el
volumen Use el teléfono.

5es Moto Voice
Póngase el audífono en la
oreja para:
•Contestar una llamada entrante.
•Transferir una llamada al audífono.
•Reanudar la música en pausa.
Moto Voice
Dígale al audífono Moto Hint y lo que
desea.Obtengainstrucciones,revise
su correo de voz, reproduzca su
canción favorita o inicie una
búsqueda usando Moto Voice.
•Si tiene MotoVoice en el teléfono
y lo entrenó con una frase de
inicio, puede comenzar a usar el
control de voz.
•Si debe configurar Moto Voice,
vaya a aplicación en el teléfono.
Nota: necesitará la función Moto
Voice en su teléfono Moto X o
Android para usar el control de voz
en el Moto Hint. Si el teléfono no
tiene Moto Voice, el audífono aún
admite comandos por voz (consulte
la página 4).

6Iluminación es
Iluminación
Luz indicadora de audífono
Nota: escuchará una indicación
cuando la batería tenga poca carga
.
Luz indicadora de carga de
la carcasa
En la oreja Apagado.
Fuera de la
carcasa Se enciende brevemente
para enviar
energía al
audífono.
Carga con cable de la carcasa y
del audífono
Audífonoenla
carcasa El audífono y la carcasa se están
cargando.
Carcasa La carcasa se
está cargando.
Luz Estado de
carga
Blanco
parpadeando Cargando.
Blanco fijo Totalmente
cargado.