Motobilt MB5060 User manual

motobilt.com | 334-219-2333
MB5060 - Assembly Instructions JT Gladiator Full Roof Rack
REV:
1
MB5060 - JT GLADIATOR FULL CAB
ROOF RACK
ASSEMBLY INSTRUCTIONS

MB5060-01 MB5060-02
MB5060-03
Qty 2
MB5060-04
Qty 5
MB5060-06 - Weldment, Mount B
Qty 4
MB5060-07
Qty 4
Rubber Edge Trim
Vinyl End Cap
Qty 6
1/4"-20 x .75" SS BUTTON HEAD SCREW
Qty 57
1/4"-20 NYLON INSERT LOCK NUT
Qty 33
MB5060-09 - Weldment, Mount A
Qty 2
MB5060-10
Qty 2
MB5060-11
Rubber Strip
Qty 6
motobilt.com | 334-219-2333
MB5060 - Assembly Instructions JT Gladiator Full Roof Rack
REV:
2
CONTENTS

motobilt.com | 334-219-2333
MB5060 - Assembly Instructions JT Gladiator Full Roof Rack
REV:
3
ASSEMBLY STEP 01
MB5060-04
Qty 5
MB5060-02
MB5060-03
Qty 2
1/4"-20 x .75" SS BUTTON HEAD SCREW
1/4"-20 NYLON INSERT LOCKNUT
FRONTREAR
1/4"-20 x .75" Button Head Socket Screw
1/4"-20 Nylon-Insert Locknut
MB5060-11
MB5060-01

Front Mount Middle / Rear Mount
Front Mount
Middle / Rear Mount
motobilt.com | 334-219-2333
MB5060 - Assembly Instructions JT Gladiator Full Roof Rack
REV:
4
ASSEMBLY STEP 02
Vinyl End Cap
Leg Mount
Mount Clamp
DO NOT TIGHTEN BOLTS ALL
THE WAY AT THIS TIME TO
DRIP RAIL MOUNT
EPDM Strip
MB5060-06 Weldment
MB5060-09 Weldment

motobilt.com | 334-219-2333
MB5060 - Assembly Instructions JT Gladiator Full Roof Rack
REV:
5
ASSEMBLY STEP 03
REMOVE RED TAPE BACKING AFTER
PLACING TRIM ON FRONT AIR DAM.
TRIM EXCESS EDGE TRIM IF NEEDED.
Rubber Edge Trim

motobilt.com | 334-219-2333
MB5060 - Assembly Instructions JT Gladiator Full Roof Rack
REV:
6
ASSEMBLY STEP 04
AFTER SECURING MOUNT CLAMP TO THE
DRIP RAIL GO BACK AND TIGHTEN THE
BOLTS FROM STEP 02
LOWER RACK ONTO DRIP RAIL, A SECOND
PERSON CAN HELP MAKE THIS EASIER