Motocaddy S1 Lite User manual

REGISTERONLINE
www.motocaddy.com/warranty
S1 Lite Push Trolley
Instruction Manual

Page 2
Locating your Serial Number
The serial number for the Motocaddy S1 Lite Push Cart is located on the underside of the trolley frame. This number is
required when registering your warranty online and should be kept handy for future use.
The same number should also be on the box received with your trolley. Please ensure you keep hold of the packaging in case
you need to return your trolley for any reason. A proof of purchase must also be kept in case your trolley requires servicing
during its warranty period.
Please keep a record of your trolley serial number here for future reference
MCS
Locating your Serial Number / Attaching the Wheels
Fig 1
Attaching the Wheels
The S1 Lite Push Cart has no denitive left or right wheel. To attach the wheels:
1. Press the button on the underside of the rear bar (g. 1) and insert the axle fully
2. Release the button and pull the wheel out slightly until it clicks
To remove the rear wheels, simply push/hold the button and pull the wheel outwards.

Page 3
Adjusting the Front Wheel Alignment
In the unlikely event that your trolley is not tracking in a straight line, the alignment of the front wheel can be adjusted to rectify
the fault. This problem can be caused by a number of factors including a slightly loose bag support or an unevenly packed golf
bag. Should you wish to alter the alignment of the front wheel, please follow these simple steps:
1. Use a at blade screwdriver to remove the plastic cap on the right hand side of the front wheel housing (g. 1)
2. Insert an Allen key into the tting underneath and turn anti-clockwise to loosen slightly (g. 2)
3. There two small metal dials on either side of the housing that are used to realign the wheel (g. 3 & 4)
4. If your trolley is veering to the right, turn the left dial clockwise and the right dial anti-clockwise
5. If your trolley is veering to the left, turn the right dial clockwise and the left dial anti-clockwise
6. Tighten the Allen key bolt and cover with the plastic cap. You may need to apply a small amount of glue to secure fully
This procedure can be carried out until the trolley is moving in a straight line (you may only need to adjust one dial at a time).
Adjusting the Front Wheel Alignment
Fig 1 Fig 2 Fig 3 Fig 4

Page 4
This Motocaddy trolley is tted with the QUIKFOLD system, allowing you to fold and unfold your trolley quicker than ever before.
Unfolding your Trolley
1. Press and hold the upper QUIKFOLD release button (g. 1)
2. Lift the handle and release the button (g. 2)
3. Unfold the upper frame section fully (g. 3)
4. Lift the main frame from the central hinge using the section marked ‘Hold Here’ until the QUIKFOLD system clicks in place.
Do not hold/touch the trolley anywhere else during this process (g. 4)
5. Unfold the upper bag support
NB : Do not lift from the handle (step 4 above) as this will complicate the folding process and may damage your trolley.
Unfolding your Trolley
Fig 1 Fig 3Fig 2 Fig 4

Page 5
Folding your Trolley
Folding your Trolley
1. Ensure that the upper bag support has been folded up to avoid damage to the frame whilst folding.
2. Press and hold the lower QUIKFOLD release button (g. 1)
3. Lower the main frame completely, releasing the button at any point (g. 2)
4. Once the frame is completely at, fold the handle towards the front wheel until the QUIKFOLD system clicks in place (g. 3)
5. You may need to gently push as indicated if you do not hear a click (g. 4)
NB : To avoid injury, ensure the latch has clicked in place securely before carrying.
Fig 1 Fig 2 Fig 3 Fig 4

Page 6
Using the Upper and Lower Bag Supports
Using the Upper Bag Supports
The upper bag support straps are secured using the following steps:
1. Stretch the elasticated strap around the bag & loop the rounded bar underneath the hook (g. 1)
2. Position the two placement straps centrally on your golf bag (g. 2)
Using the Lower Bag Supports
This Motocaddy trolley is tted with the EASILOCK™ bag attachment system.
If you are using an EASILOCK™ compatible golf bag please follow these simple instructions:
1. Remove the two pre-tted lower bag straps by depressing the rear button and sliding (g. 3)
2. Match up the indicating line on the golf bag with the line on the lower bag support
3. Lower the bag until the pins lock in position. You should hear a small click
If you are using a non-EASILOCK™ golf bag, please use the following instructions:
1. Stretch the lower bag strap around the bag base & loop the rounded bar underneath the hook
2. Position the two placement straps centrally on the base of your golf bag
Please ensure all straps are hooked securely before releasing. Failure to do so could result in injury.
Fig 2
Fig 3
Fig 1

Page 7
Adjusting the Bag Supports / Using the Parking Brake
Adjusting the Bag Supports
The bag support straps are manufactured from elasticated material to allow your golf bag to be
held tightly in place.
The strap should be adjusted to be reasonably tight around the golf bag:
1. Unclip the elasticated straps from the housing by pulling outwards in the direction shown (g. 1)
2. Move the bar as required to tighten or loosen the strap tting. Pulling the bar downwards will
tighten, pushing it upwards will loosen (g. 2)
3. Ensure that the straps are clipped back into the housing before use (g. 3)
Using the Parking Brake
The foot brake on the S1 Lite Push Cart is designed to be used as a parking brake (like a hand
brake of a car or foot brake on a pram). When applying the brake, please ensure that the trolley
has completely stopped moving.
WARNING: attempting to apply the brake whilst the trolley is still in motion may cause
damage to the trolley and could invalidate the warranty.
Always ensure that the parking brake has been disengaged before attempting to set off again.
Fig 1
Fig 2
Fig 3

Motocaddy Ltd, Units 15 - 18 Stansted Distribution Centre,
Start Hill, Great Hallingbury, Hertfordshire, CM22 7DG, United Kingdom
t: [phone] e: [e-mail] w: www.motocaddy.com
We are dedicated to protecting the environment and encourage the recycling of Motocaddy products through a free
collection and disposal service. To nd out more or to locate your nearest Motocaddy recycling point, please contact
us through our website.
MC.17.16.003 EASILOCK™ Patent (GB) - GB2519073