Motorola MBP161TIMER User manual

MODELS:
MBP161TIMER
MBP161TIMER-2
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Digital Baby Monitor
1. Insert the DC plug of
the power adapter
with the bigger DC
plug into the DC jack
on the back of the
baby unit, as shown.
2. Connect the other
end of the power
adapter to a suitable
electrical outlet.
A. Baby unit power supply
DC JACK
DC PLUG
B. Parent unit battery installation and power supply
A rechargeable battery pack is supplied and should be
fitted, so that the parent unit can be carried to another
location without losing the link with the baby unit(s).
Charge the parent unit before using it for the first time
or when the parent unit indicates that battery is low.
1. Slide off the battery compartment cover.
2. Insert the plug of the rechargeable battery pack into
the jack inside the battery compartment.
3. Fit the battery pack into the compartment, with the
label THIS SIDE UP facing up.
4. Slide the battery compartment cover back until it
clicks into place.
5. Insert the DC plug of the power adapter with the
smaller DC plug into the DC jack on the side of the
parent unit.
6. Connect the other end of the power adapter to a
suitable electrical outlet.
The charging indicator comes on.
DC PLUG
DC JACK
The parent unit comes with a desktop stand attached to the back of the unit. To place the
parent unit on a desk, simply pull out the stand, as shown.
NOTE
Place the parent unit on a flat, even surface.
C. Desktop stand on parent unit
WARNING:
Strangulation Hazard. Children have
STRANGLED in cords. Keep this cord
out of the reach of children (more than
3ft (1m) away). Never use extension
cords with AC Adapters. Only use the
AC Adapters provided.

2. Basic explanation of the display icons
3. General Information
If your product is not working properly...
1. Read this Quick Start Guide or the User’s Guide.
2. Visit our website: www.motorola.com
3. Contact Customer Service:
Parent Unit
Connection status
- Displays when the parent unit is linked to the baby unit.
- Flashes when the link between the baby unit and the parent unit is lost or the parent unit is out of
range of the baby unit.
Battery status
-scrolls when battery is charging.
-displays when battery is fully charged.
-displays when battery is low and needs charging.
-displays when battery is empty and needs charging.
Sound Alert - Displays when sound alert is ON.
- Flashes when sound alert is triggered.
Volume off - Displays when speaker volume is turned off.
Nightlight - Displays when nightlight is ON.
Lullaby - Displays when lullaby is playing.
US and Canada 1-888-331-3383
Email: [email protected]
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this
product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
respective owners.
© 2014 Motorola Mobility LLC. All rights reserved.
Printed in China
US_EN Version 4.0