Motorola ME6051R Series User manual

User's Guide
Digital 1.8 GHz
DIGITAL CORDLESS
TELEPHONE
WITH *CALLER ID AND
HANDSET SPEAKERPHONE
Model ME6051R Series
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the
property of their respective owners. © Motorola, Inc. 2004.

R (Flash) key

29
Access a CallWaiting Line /
Holding and transferring calls (PABX)
Changing the HandsetVolume

ME6051-1 ME6051-2 ME6051-3 ME6051-4

CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT AND VOID THE WARRANTY.
Note: To ensure the battery charging properly, clean the charging contacts on the
handset and charger with a soft, dry cloth once a month. Clean more often if the unit is
subject to grease, dust or high humidity.
Insert the 2 xAAA (600mAh/1.2V) Ni-MH re-chargeable batteries
supplied, observing the correct polarity.
Replace the cover on the battery compartment, press to release latch and pull the battery
door upwards. Place the handset in the base station.

Note:When a suitable headset is connected calls
are made or answered using the key.
*user must subscribe to the network's caller id service.
+ more than one handset required.
Operation with 2 standardAAA
re-chargeable batteries
Backlight display
+
+
Caller ID* on CallWaiting
(dependent on network) Programmable call block
*

Display Icons
Key to view CALL LOG memory
or outgoing
or outgoing
R(Flash) key,Access a CallWaiting Line / Hold
and transfer calls when connected to PABX

1-25
1-25
EMERGENCY
AUTO ANS
5-SET TIME 6
ENTER NAME
ENTER NO
1- 2-
ENTER PIN
1-10
100/250/600
HH : MM
Note:The acutal languages available
will depend on the country version.

15