Motorola MR535 User manual

Motorola MR535
LED Flashlight User Guide
Congratulations on your purchase of the Motorola MR535 high- performance, high durability
flashlight. The Motorola MR535 utilizes CREE XP-G2 LED technology that is geared for
optimum effectiveness and high efficiency. Its ability to endure rugged use is enabled by the
aircraft grade aluminum with premium Type II anodized anti-abrasive finish. It is lightweight
and compact in design making it a great option for portability. Use it in any situation such as
hunting, hiking, camping, caving, general household, recreational activities, rugged sports,
industrial work or emergency situations. Please take a few moments to read this user guide to
ensure that you get the best performance and years of trouble free service.
Flashlight Operation
Your Motorola MR535 flashlight has a side switch for on/off operation and is equipped with 4
illumination light modes to suit your varied needs.
Turn ON
Press and hold the side switch for 1 to 3 seconds and release to turn the light on.
Turn OFF
Press and hold the side switch for 1 to 3 seconds. The light will turn off. Release the side switch.
Lockout Mode
Your Motorola MR535 is equipped with a lockout mode to minimize or prevent unintended
operation
Enter Lockout Mode.
With the light off, press and hold the side switch for 3 to 4 seconds. The MR535 will flash 2 times
to indicate the light is in lockout mode.
Exit Lockout Mode.
With the light off and in lockout mode, press and hold the side switch until the light turns on. The
MR535 will exit lockout mode and return to the brightness setting selected when placed into
lockout mode.
Changing the Brightness Setting
Your Motorola MR535 has 3 different preset brightness levels as follows:
high →medium →low
With the light on, single press and release the side switch to cycle through the different
brightness levels.
Memory Function
Your Motorola MR535 flashlight has a memory function. The light will memorize the selected
brightness setting when turning the light off. The next time the light is turned on, it automatically
resumes to the previously selected brightness level.
Note that the memory function does NOT include the strobe mode. If the light is turned off while
in strobe mode, the light will come back on in the last brightness setting (high, medium, low)
that was active prior to strobe mode.
Strobe Mode
Your Motorola MR535 flashlight is equipped with a strobe mode that can be accessed from any
light setting including the OFF position, except when the light is in lockout mode. When strobe
mode is entered, the light will automatically switch to the high brightness setting.
To enter strobe, quickly double click the side switch to activate the strobe mode.
To exit strobe mode, quickly double click again. The flashlight will exit from strobe mode and
return to the last light setting, including OFF.
Battery Charge Indicator Light
Note: When the charge indicator light is blinking, it means to indicate
the battery is nearly depleted and needs to be charged.
Maintenance and Precautions
· Do not disassemble the sealed head. Doing so can cause damage to the
flashlight and will void the warranty.
· Use a high-quality battery to mitigate the risk of the flashlight being damaged by
electrolyte leakage or battery breakage.
· If the flashlight will not be used for a long time, remove the battery to avoid damage
caused from battery leakage.
· Lubricate the O-rings regularly using a Q-Tip®. Apply a small dab of silicone grease or
petroleum jelly to the contacts to prevent corrosion. Doing so will keep the flashlight
properly sealed against water. If the O-rings are damaged after prolonged use, replace
them.
Package includes
· 1 Motorola MR535 LED Flashlight
· 1 16340 Rechargeable Li-ion Battery, 550mAh
· 1 Belt Clip
· 1 micro-USB Cable
· 1 User Guide
Product Description
Battery Installation
1. Unscrew the tail switch cap and insert 1x16340
rechargeable (Li-Ion) battery (included).The (+)
terminal on the battery should face toward the
flashlight’s head.
2. Replace the tail switch cap and turn on the
flashlight as indicated in any of the options
listed below.
Charging the MR535
The Motorola MR535 charge indicator light will blink during the ON modes to indicate the
battery is depleted and needs to be charged.
1. With the light in the OFF mode, open the rubber plug on the micro-USB
charging port to reveal the micro-USB charging connector.
2. Connect the MR535 to a power outlet using the included cable.
3. The charge indicator light will turn red to indicate the battery is charging.
4. Once the battery is fully charged, the charge indicator light will turn blue.
5. Remove the micro-USB cable and re-seat the rubber plug on the micro-USB charging port
to maintain waterproof integrity
NOTE: The flashlight will not illuminate while charging..
With the light on, the charge indicator light (located on the side switch) will flash once
per second when the battery charge has reached 30% of full charge. When the battery
charge has reached 10%, the charge indicator light will flash to indicate low battery
capacity.
16340
Head
Tall Cap
Switch
micro-USB
Port

· Clean the flashlight contacts periodically, especially if the light flickers or does not light up.
There are different reasons for a flickering or non-working light:
A: The battery may need to be replaced.
Solution: Replace the old/defective battery with a new one (be sure to double
check correct installation of + and - terminals).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Use a Q-Tip® to apply a tiny amount of alcohol to clean the contact
points.
If the above methods do not work, please refer to the warranty policy listed in
this user guide.
Warning The Motorola MR535 is a high-intensity lighting device and capable of
causing eye damage. Avoid shining the light directly into the eyes. LED radiation (RG-2)
Product Specifications
Product Warranty
Mode
500lm 180lm 20lm
1h 2h 15h
CREE XP-G2
Output
(lumens)
Runtime
LED
IC
FCC
1 X 16340 Rechargable Li-ion, 550mAh
Batteries
99mm(L) * 27.9mm(D)
Flashlight
Dimensions
2.5-4.2V
Working
Voltage
75g
Weight w/o
Batteries
159m
Beam
Distance
6300cd
Peak Beam
Intensity
IPX-8 (2 meters submersible rating)
Waterproof
1.5m
CAN ICES-3(B)/NMB-3(B)
Impact
Resistance
High Medium Low
9Hz
--
Stroble
This device complies with Part 15 of the FCC Rules. Operations is subject to the
following two conditions: (1) this divice may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS
PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT WILL
MOTOROLA MOBILITY LLC, MOTOROLA TRADEMARK HOLDINGS, LLC, LENOVO GROUP LIMITED,
MANUFACTURER, DISTRIBUTOR, OR ZENUS TECHNOLOGY LIMITED BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS)
RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or
limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
Consumer Products and Accessories Limited Warranty (“Warranty”)
Thank you for purchasing this Motorola branded product manufactured under licenseby Zenus
Technology Limited, 5000 Peachtree Industrial Blvd., Suite 160, Berkeley Lake, GA 30071.
("ZENUS")
What Does this Warranty Cover?
Subject to the exclusions contained below, ZENUS warrants that this Motorola branded product
("Product")or certified accessory ("Accessory") sold for use with this product is manufactured to
be free from defects in materials and workmanship under normal consumer usage for the period
outlined below. This Warranty is your exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
What will ZENUS do?
ZENSU or its authorized distributor at its option and within a commercially reasonable time, will at
no charge repair or replace any Products or Accessories that do not conform to this Warranty. We
may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products,
Accessories or parts.
Product Covered
Consumer Products
Consumer Accessories
Consumer Products and
Accessories that are
Repaired or Replaced
Length of Covered
One (1) year (or as otherwise required by law) from
the date of the products original purchase by the first
consumer purchaser of the product.
Ninety (90) days from the date of the accessories
original purchase by the first consumer purchaser of
the product.
The balance of the original warranty or for ninety
(90) days from the date returned to the consumer,
whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and
batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the
product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of MOTOROLA or ZENUS, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the
use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are
excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing,
adjustment, installation, maintenance, alteration, or modification in any way by someone other than
MOTOROLA, ZENUS or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are
excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any
communication service or signal you may subscribe to or use with the Products or Accessories is
excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
USA and CANADA: (866) 740- 8245 or email at [e-mail]
Manufactured, distributedor sold by Zenus Technology Limited, official licensee for this product.
MOTOROLA, the Stylized Motorola Logo and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC, and are used under license. All other trademarks
are the property of their respective owners. ©2017 Motorola Mobility LLC.
Please contact customer service at (866) 740- 8245 for questions, comments, warranty, support or
service related to this product.