Motorola Verve RIDER Instruction sheet

RIDER
RIDER
Read me
en

Your wireless earbuds
Your wireless earbuds
1en
Wear
Power
S
tatus Light
Volume
& Track
Control
+
_
/
Calls, Voice
& Music
/
Calls, Voice
& Music

Step 1: Charge up & power on
Step 1: Charge up & power on
2 en
Note: Before use, charge until the status light
turns green.
(Wall charger
not included.)
Charge up.
Power on.
Press and hold
Power

Step 2: Pair your earbuds
Step 2: Pair with BluetoothTM
3en
1Turn on Bluetooth on your device.
2Turn on your wireless earbuds.
3On your device, go to the
Bluetooth menu to pair & connect.
Enter 0000 if prompted.
4When the device and earbuds
connect, you’ll hear a tone.
Light is
solid blue.
Light blinks
blue.

Download Hubble Connect forVerveLife
Step 3: Download App
4 en
Download Hubble Connect for VerveLife
from The App Store®or Google Play™to
enjoy some extra functionality such as
Battery Meter and last known location of your
headset.

Calls, Voice & Music Control
Calls, Voice & Music Control
5en
The buttons at the ends of your earbuds
perform the same functions. Press either
button to control calls, voice commands, and
music.
Note: Voice control may not work on some
devices or in all languages.
Note: Some features are phone/network
dependent
Volume down
Or press & hold
to restart a track or
play the last track.
Volume up
Or press & hold
to play the next track.
+
Music Play/Pause
Answer/End Calls
Start Voice Command
Music Play/Pause
Answer/End Calls
Start Voice Command

mute during call press
Calls, Voice & Music Control6 en
Music
play/pause press
press and hold
then say the command
volume down/up press
next/previous track press and hold
Note: Depends on your
phone’s music controls.
change EQ settings press at at the
same time to go to the next
sound prole
Calls
Voice
answer/end call press
reject a call press and hold
or
to issue a voice
command
or
+
or
+
or
+
and
or
+
and
+
or

Advanced
Advanced
7en
Status Lights
Pairing mode
Connected
Low battery
Charging
Full charge
Charge level check
Power off
blinking blue
steady blue
blinking red
steady red
steady green
steady green for 2 seconds
fading in/out blue

Advanced
Charge Level Check
8 en
Note: Not available on all models.
Note: Your battery is designed to last the life
of the product. It should only be removed by
a recycling facility. Any attempt to remove or
replace your battery may damage the
product and void your warranty.
Power
Press quickly to hear
remaining play time.

Advanced
Reset
9en
Turn off Bluetooth for all connected devices. Turn on
the wireless earbuds, then press and hold
and both volume buttons until the status light shows
alternating red and blue. You’ll hear a tone.
Note: This product contains exposed magnets and
may damage magnetic information, such as credit
card strips and ID cards.