Motorola Buds Specification sheet

en
more text
motorola buds
let’s get started

1en Here’s what you get
Here’s what you get
check it out
Enjoy crystal clear calls and rich stereo sound with your
Motorola Buds Bluetooth® headset. Make calls on the go, and
listen to your music the way you like it. This stylish, lightweight
headset is designed for all day comfort.
Go ahead, check it out:
Hi. Meet your new headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Give it some juice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ready? Turn it on (or off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connect & go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stream some music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Take a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Advanced. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Problems? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Get what you need. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Safety, Regulatory, & Legal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Note: This headset is not designed for exposure to moisture.
We recommend that you don’t work out while wearing the
headset.
Caution: Before using your product, please read the safety,
regulatory, and legal information at the back of this guide.

2Hi. Meet your new headset en
Hi. Meet your new headset
take a good look
Wear
Call/Music Buttons
Calls/Play
Button
Volume Buttons
Up
Down
Left
Earbud
Right
Earbud
Power Button
Press & hold
to turn on or o.
Charge
(Micro USB)
Your earbuds automatically
adjust in your ear for a
perfect t.
Track Button
Status
Light

3en Give it some juice
Give it some juice
charge up
You’ll want to fully charge your headset before you use it. Plug
the charger into the micro USB port.
The headset status light shows the charge level:
•Red:Headset is charging.
• Green: Headset is fully charged.
Tip: Be sure to completely close the USB charging cover to
protect it from water or sweat damage.
Caution: Your battery is designed to last the life of your
device. It should only be removed by a recycling facility. Any
attempt to remove or replace your battery will damage the
device, void your warranty, and could cause injury.

4Ready? Turn it on (or off) en
Ready? Turn it on (or off)
power up
Turn on: Press and hold the Power button until the status light
flashes blue.
Turn off: Press and hold the Power button until the status light
turns steady blue and fades out.
Tip: To save battery power, turn off the headset when you’re
not using it.
Wear it
Your earbuds have moves, just like you. They automatically
adjust in your ear for a perfect fit.
Store it
Touch each earbud to the stem when you’re not listening to
music, or when you need to store your headset.
11 2

5en Connect & go
Connect & go
set up Bluetooth®
1
Turn on Bluetooth on your device.
2
Turn on your headset.
4
When the device and headset connect,
you’ll hear “pairing complete” or a tone.
3
Go to the Bluetooth menu on your device
to pair & connect with the headset. Enter
passcode 0000 if prompted.

6Stream some music en
Stream some music
play music from your phone or music player
To stream music to your headset, start playing music on your
music player. You can control music from your music player or
use the buttons on your headset stems.
Music pauses when you make or receive a call and resumes
playing when the call ends.
Notes:
•This feature is phone dependent.
•Music controls are dependent on the music player.
To…
play/pause music Press the Call/Play button one
time.
skip to next track Press the Track button one time.
go back a track Press the Track button two times.
change music
bass/treble settings
Press and hold the Call/Play
button until you hear “EQ
changed” or a tone.
hear remaining music
play time
Press both volume buttons while
music playback is paused. Not
supported for all headsets.

7en Take a call
Take a call
it’s good to talk
Notes:
•Some features are phone/network dependent.
•Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the laws
and drive safely.
To…
answer a call Press the Call/Play button.
reject a call Press and hold a volume button
until you hear a tone.
make a voice dial call Press and hold the Call/Play
button until you hear a tone.
mute or unmute a call Press and hold both volume
buttons until you hear “mute on”,
“mute off” or a tone.
end a call Press the Call/Play button.
answer second
incoming call
Press the Call/Play button.
reject second
incoming call
Use the phone keypad to reject a
second incoming call.

8Advanced en
Advanced
more clever stuff
Headset status light
Reset headset
To reset default factory settings on your headset, turn
Bluetooth® power off for all connected devices. Turn the
headset on, then press and hold the Call/Play and both
volume buttons until the status light shows alternating red and
blue pulses.
Caution: This feature erases all device pairing information
stored on your headset.
If light shows… your headset is…
flashing blue powered on and searching for a
device
steady blue for three
seconds, then off
connected to a device
flashing red in a low battery state
steady blue, then
fading out
powering off
steady red attached to charger, battery
charging
steady green attached to charger, battery fully
charged

9en Problems?
Problems?
we have solutions
A few frequently asked questions—with answers, of course.
Find more at www.motorola.com/support.
• My headset will not enter pairing mode
Make sure that any devices previously paired with the
headset are turned off, then turn the headset off and on. Go
to the Bluetooth® menu on your phone to pair and connect
with the headset (see “Connect & go” on page 5).
• My phone doesn't find my headset when searching
Reset your headset (see “Reset headset” on page 8), then
pair your phone and headset (see “Connect & go” on
page 5).
• My headset will not pair with my phone
Reset your headset (see “Reset headset” on page 8), then
pair your phone and headset (see “Connect & go” on
page 5).
• My headset connected before, but now it's not working
Make sure your phone is on and the phone’s Bluetooth
feature is turned on. If the phone’s Bluetooth feature was
turned off or was turned on only temporarily, you may need
to restart the Bluetooth feature and pair your phone and
headset again (see “Connect & go” on page 5).