Motorola MOTO BUDS 270 ANC User manual

MOTO BUDS 270 ANC
BLUETOOTH TRUE WIRELESS EARBUDS
For: MOTO BUDS 270 ANC
User Guide

6
1. Getting started ................................................................... 7
2. Getting to know your true wireless earbuds...........9
3. Using the true wireless earbuds ................................ 10
3.1 Select the earcaps .......................................................................................... 10
3.2 Wear the earbuds ........................................................................................... 10
3.3 Reconnect the earbuds to your Bluetooth device............................. 10
3.4 Operation .............................................................................................................11
3.4.1 Turn on/o...........................................................................................11
3.4.2 Call control ..........................................................................................11
3.4.3 Music ......................................................................................................11
3.4.4 Activate voice assistant..................................................................11
3.4.5 Noise cancellation and ambient sound ....................................11
3.4.6 Restore factory settings................................................................12
3.5 LED status indicators ........................................................................... 12
4. Help........................................................................................13
5. Technical Specifications................................................ 14
6. General information.........................................................15

7
1. Getting started
Location
Important
The earbuds are resistant to dripping and splashing water, but the charging
case is not waterproof. Make sure you wipe o any moisture on the earbuds
thoroughly before putting them into the charging case.
Range of earbuds and the Bluetooth device
Make sure the earbuds and Bluetooth device are placed within range of each
other.
Charging the battery
Important
Warning! Use only the approved rechargeable Lithium-ion battery supplied
with your MOTO BUDS 270 ANC.
Charging case
Connect one side of the supplied USB-C charging cable to the Type-C
charging port, and the other side to the USB AC adaptor.
Fig. 2a
The LED indicators on the charging case flash then stay on when charging is
complete. They show the current battery level. For the first time use, charge
the battery for at least 5 hours continuously. After the first time charge, it takes
approximately 2 hours for a normal charge.
Battery performance
In ideal conditions, a fully charged battery should give up to 6.0 hours usage
time or up to 50 hours standby time.
The charge capacity of the rechargeable battery will reduce with time as it
wears out, giving the earbuds less usage / standby time.
Getting started

8
Battery low warning
If you hear 'LOW BATTERY' every 3 minutes, recharge the battery.
Earbuds
Put the earbuds into the charging case. Charging starts automatically. The red
LEDs on both earbuds turn on until charging is complete.
Connecting your earbuds
Pair your earbuds with the Bluetooth device for the first time
1. Open the charging case top lid to turn earbuds on.
• You will hear 'POWER ON'. The LEDs on both earbuds will flash blue for
a second and you will hear 'LEFT CHANNEL', 'RIGHT CHANNEL'.
• Then the LED indicator flashes every 5 seconds on the left earbud and
red and blue alternately on the right earbud. Earbuds enter pairing
mode. You will hear 'PAIRING'.
2. Make sure the Bluetooth function of you device is activated. Earbuds will
do pairing automatically.
3. Select MOTO BUDS 270 ANC from the Bluetooth menu of your device. You
will hear 'HELLO MOTO, CONNECTED' when pairing is successful. The blue
LED on both earbuds will flash slowly.
Note
Make sure your device is compatible with Bluetooth and earbuds.
Your MOTO BUDS 270 ANC are now ready for use.
Fig. 2b
MOTO BUDS 270 ANC
Fig. 3b
Fig. 3a
Getting started

9
2. Getting to know your true wireless earbuds
Overview
1 Microphones
2 Multi-function button (MFB)
3 LED indicators
4 Replaceable earcaps (size M)
5 Charging case
6 USB Type-C charging socket
7 Earbud charging contacts
8 Battery level indicators
2
1
3
4
Fig. 1a
6
5
Fig. 1b
8
7
Fig. 1c
Getting started

10
3. Using the true wireless earbuds
3.1 Select the earcaps
1. Select from 3 dierent size of replaceable earcaps which fit your ears the
best. The earbuds come with size M attached as default.
2. Fit the earcaps into the earbuds.
3.2 Wear the earbuds
Insert the earbuds into ears and rotate to fit comfortably.
3.3 Reconnect the earbuds to your Bluetooth device
1. Turn on your Bluetooth device with the Bluetooth feature activated.
2. Open the charging case top lid to turn on your earbuds.
• The earbuds will auto reconnect to the last connected Bluetooth device.
Note
If the earbuds cannot find and connect to any Bluetooth device with 5 minutes,
they will switch o automatically.
Fig. 4a
Fig. 4b
Fig. 4c
Using the true wireless earbuds

11
Using the true wireless earbuds
3.4 Operation
3.4.1 Turn on/o
Task Operation
Turn on Open the charging case top lid. You will
hear 'POWER ON'.
Turn o
Put the earbuds in the charging case and
close the charging case top lid. You will
hear 'POWER OFF'.
3.4.2 Call control
Task Operation
Answer/End a call Left/right MFB: Tap once.
Reject a call Left/right MFB: Press and hold for 2s.
3-way call
Pick up calls/Put calls on hold/
switch calls Left/right MFB: Tap once.
Reject calls/Continue current call Left/right MFB: Press and hold for 2s.
End current call/Resume on hold
calls Left/right MFB: Tap twice.
3.4.3 Music
Task Operation
Play/Pause Left/right MFB: Tap once.
Previous track Right MFB: Tap 3 times.
Next track Right MFB: Tap twice.
3.4.4 Activate voice assistant
Task Operation
Siri, Google Right MFB: Press and hold for 2s.
3.4.5 Noise cancellation and ambient sound
Task Operation
Switch the noise cancellation/
ambient sound on/o Left MFB: Tap twice.

12
3.4.6 Restore factory settings
1. Switch o both earbuds.
2. Press both MFBs for 10 seconds.
3. Put both earbuds into the charging case.
4. Follow pairing instructions to do pairing (see page 8).
3.5 LED status indicators
Power on Flash blue for 1 second
Power o Flash red for 2 seconds
Pairing Flashes blue every 5 seconds (left earbud)
Flashes red and blue alternately (right earbud)
Connected Flashes blue every 5 seconds
Charging Steady red
Fully charged O
Using the true wireless earbuds

13
Help
4. Help
The true wireless earbuds do not turn on.
• The battery level is too low. Recharge your earbuds.
The true wireless earbuds do not connect with the Bluetooth device.
• Ensure the Bluetooth function of the Bluetooth device has been turned on.
• Ensure the Bluetooth function of the previous connected device has been
turned o.
• Ensure you follow the instructions in this user manual to connect the
earbuds (see page 8).
The true wireless earbuds keep disconnecting.
• The battery level is too low. Recharge your earbuds.
• Ensure the true wireless earbuds and Bluetooth device are operated within
range.
• Remove the true wireless earbuds from the pairing list and connect them
with the Bluetooth device again.
Poor audio quality.
• Ensure the true wireless earbuds and Bluetooth device are operated within
range.
• Remove the true wireless earbuds from the pairing list and connect them
with the Bluetooth device again.
Only one side of the earbuds has sound.
• The battery level of one earbud is too low. Recharge your true wireless
earbuds.
• One earbud has disconnected from another earbud.
• Try to reconnect the true wireless earbuds with the Bluetooth device.
• Reset the earbuds if the problem is not solved.
The other side's voice cannot be heard.
• Adjust the volume on the Bluetooth device.
My voice cannot be heard.
• Check the Bluetooth device to ensure the voice is going through the true
wireless earbuds.
• Remove the earbuds from the ears and speak close to the microphone.
Music plays on my Bluetooth device not through the earbuds.
• Check on your Bluetooth device if you have selected to listen to music
through the earbuds.

14
5. Technical Specifications
Bluetooth profiles HFP (Handsfree Profile); A2DP (Advanced
Audio Distribution Profile); AVRCP (Audio
Video Remote Control Profile)
Bluetooth version 5.2
Battery Lithium-ion 350mAh 3.85V on charging case
Music time 6 hours (maximum)
Talk time 5 hours (maximum)
Standby time 50 hours (maximum)
Frequency range 2.402 – 2.480GHz
Transmission power 7dBm
Operation range 10 meters (33 feet)
Operation temperature 0°C - +45°C
Note
Specifications are subject to change without prior notice.
Technical Specifications