Motorola DIMETRA MTS 2 User manual

When printed by Motorola
Global Customer Documentation
DIMETRATM
System Documentation
Dimetra IP
September 2009
MTS 2 and MTS 4
Installation, Configuration
and Basic Service Manual
6802800U74-N

Copyrights
The Motorola products described in this document may include copyrighted Motorola computer programs. Laws in the United States and other countries
preserve for Motorola certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs contained in
the Motorola products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola.
Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents or patent applications of Motorola, except for the normal nonexclusive, royalty-free license to use that arises by operation of law in the sale
of a product.
Disclaimer
Please note that certain features, facilities and capabilities described in this document may not be applicable to or licensed for use on a particular system, or
may be dependent upon the characteristics of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola contact
for further information.
Trademarks
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their
respective owners.
Copyrights
© 200 - 2009 Motorola, Inc. All rights reserved.
No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any formorby
any means, without the prior written permission of Motorola, Inc.
European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive
The European Union’s WEEE directive requires that products sold into EU countries must have the crossed out trashbin label on the product (or the package
in some cases).
As defined by the WEEE directive, this cross-out trashbin label means that customers and end-users in EU countries should not dispose of electronic and
electrical equipment or accessories in household waste.
Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection
system in their country.
6

CMM labeling and disclosure table
The People’s Republic of China requires that Motorola’s products comply with
China Management Methods (CMM) environmental regulations. (China
Management Methods refers to the regulation
Management Methods for
Controlling Pollution by Electronic Information Products
.) Two items are used to
demonstrate compliance; the label and the disclosure table.
The label is placed in a customer visible position on the product.
• Logo 1 means that the product contains no substances in excess of the
maximum concentration value for materials identified in the China
Management Methods regulation.
• Logo 2 means that the product may contain substances in excess of the
maximum concentration value for materials identified in the China
Management Methods regulation, and has an Environmental Friendly
Use Period (EFUP) in years, fifty years in the example shown.
Logo 1 Logo 2
The Environmental Friendly Use Period (EFUP) is the period (in years) during
which the Toxic and Hazardous Substances (T&HS) contained in the Electronic
Information Product (EIP) will not leak or mutate causing environmental pollution
or bodily injury from the use of the EIP. The EFUP indicated by the Logo 2 label
applies to a product and all its parts. Certain field-replaceable parts, such as
battery modules, can have a different EFUP and are marked separately.
The Disclosure Table is intended only to communicate compliance with China
requirements; it is not intended to communicate compliance with EU RoHS or any
other environmental requirements.
© 200 Motorola, Inc.9

This page intentionally left blank.

Service Information
EMEA Systems Support Centre (ESSC)
The EMEA Systems Support Centre provides a remote Technical Support Service to help customers resolve
technical issues and quickly restore networks and systems. This team of highly skilled professionals is available to
cutomers with current service agreements in place that include the Technical Support Service. The ESSC
technical experts may be accessed through the EMEA Integrated Call Center either electronically or using the
telephone numbers listedbelow. If you are unsure as to whether or not your current service agreement entitles you
to benefit from this service, or if you would like more information about the Technical Support Service, please
contact your local customer support or account manager for further information.
Contact details:
E-mail: [email protected]
List of Telephone numbers:
It is recommended that access from any other country uses [phone]
European Systems Component Centre (ESCC)
The European Systems Component Centre provides a repair service for infrastructure equipment. Customers
requiring repair service should contact the Customer Information Desk to obtain a Return Material Authorisation
number. The equipment should then be shipped to the following address unless advised otherwise.
Motorola GmbH, European Systems Component Centre, Am Borsigturm 130,13507 Berlin, Germany
Contact details:
E-Mail: [email protected]
Telephone: [phone]
Telefax: [phone]
Monday - Friday 08:00 am to 06:00 pm (CET)
Parts Identification and Ordering
Request for help in identification of non-referenced spare parts should be directed to the Customer Care
Organization of Motorola’s local area representation. Orders for replacement parts, kits and assemblies should be
placed directly on Motorola’s local distribution organization or via the Extranet site Motorola Online at
https://emeaonline.motorola.com.
Country In Country Number to Dial
AUSTRIA 01206091087
DENMARK 043682114
FRANCE 0157323434
GERMANY 06950070204
ITALY 0291483230
LITHUANIA 880 030 828
NETHERLANDS 0202061404
NORWAY 24159815
PORTUGAL 0217616160
SAUDI ARABIA 800 844 5345
SOUTH AFRICA 0800981900 (EICC)
SPAIN 0912754787
RUSSIA 810 800 228 41044 ( Alternative 810 800 120 1011)
UNITED KINGDOM 01256 484448

EMEA Test Equipment Support
Information related to support and service of Motorola Test Equipment is available by calling the Motorola Test
Equipment Service Group in Germany at [phone], Telefax [phone], through the
Customer Care Organization of Motorola’s local area representation, or via the Internet at
http://www.gd-decisionsystems.com/cte/.
Your Input
...is much appreciated. If you have any comments, corrections, suggestions or ideas for this publication or any
other requirements regarding Motorola publications, please send an e-mail to [email protected]m.
Updated Versions of this Manual
......are available at our Extranet site Motorola Online. Contact us at [email protected] for access.

Document
History
Document History
■■■■■■■■■ ■■■■■■■■■ ■■■■■■■■ ■■■■■■■■■ ■■■■■■■■ ■
■
■
■
■
Edition Description Date
6802800U74–A Initial Edition July 2006
6802800U74–B Minor changes Aug. 2006
6802800U74–C Table 4–4 updated Aug. 2006
Table 4–5 updated and note inserted
Table 5–6 updated
6802800U74–D Service Cable and Connector Box Description section updated Oct. 2006
6802800U74–E Updates throughout the manual Feb. 2007
6802800U74–F Expansion Cabinet updates throughout the manual, and
addition of Expansion Options chapter. Aug. 2007
6802800U74–G 800 MHz updates throughout the manual. Nov. 2007
6802800U74–H BTS Q108 SPU updates, including the addition of redundant
power connector on the Site Controller. Mar. 2008
6802800U74–J •Regulatory CE Labelling Compliance updated
•Chapter 16, "MTS 4 Outdoor Enclosure" added
•Added info about Base Radio dekey when Standby SC
is powered on.
•Added info about frequencies in receiver band that can
cause high bit error rate to occur
•Updated FRU number for RX Splitter
June 2008
6802800U74–K •Updated MTS site link configuration info in Table 8–9
•Updated RF cabling/Connections for MTS 4 with two
TX/RX antennas and up to one additional RX antenna
(Table 5–13 and Figure 5–12)
•Revision to FRU numbers for MTS fan and Hybrid
Combiner
•Other minor updates
Dec. 2008
6802800U74–L •Updated manual with TEDS compatibility.
•Updates to the Power Supply Unit (PSU) DC Input
Power.
•Other minor updates throughout the manual.
Apr. 2009
6802800U74-N September 2009 i

Document History
Edition Description Date
6802800U74–M •Ethernet Site Link Cabling hardware installation
information added.
•Ethernet Site Link cabling and interconnection added.
•Configuring Ethernet Site Link added.
June 2009
6802800U74–N •Ethernet Site Link Retro-fitkitandconfigurations added.
•Added section MTS LVD Kit Installation to Hardware
Installation chapter.
Sep. 2009
ii 6802800U74-N September 2009

Table
of
Contents
Contents
■■■■■■■■■ ■■■■■■■■■ ■■■■■■■■ ■■■■■■■■■ ■■■■■■■■ ■
■
■
■
■
MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
IconConventions........................................ -xxvi
RegulatoryCEMarkingCompliance............................... -xxvii
Chapter 1: MTS Overview
MTSPlatform........................................... 1-2
MTS2Components........................................ 1-3
MTS4Components........................................ 1-4
ExpansionCabinetComponents.................................. 1-6
MTSModules........................................... 1-8
RFDistributionSystem.................................... 1-8
Preselector........................................ 1-8
Duplexer......................................... 1-8
PostFilter........................................ 1-9
CavityCombiners..................................... 1-9
HybridCombiner..................................... 1-9
RxSplitter........................................ 1-9
SiteController........................................ 1-9
XHUB............................................1-10
BaseRadio(BR).......................................1-10
Transceiver........................................1-10
Power Amplifier.....................................1-10
PowerSupplyUnit......................................1-10
BackupBattery......................................1-10
CoolingFans......................................... 1-11
Chapter 2: General Safety
GeneralSafety.......................................... 2-1
MainsSafety........................................... 2-4
BatterySafety........................................... 2-5
Chapter 3: Site Preparation
SitePlanning........................................... 3-1
SiteSurvey.......................................... 3-2
SiteConsiderations...................................... 3-3
CabinetsConsiderations...................................... 3-4
MTS2CabinetConsiderations................................. 3-4
MTS4CabinetConsiderations................................. 3-6
6802800U74-N September 2009 iii

Contents
ExpansionCabinetConsiderations............................... 3-8
AntennaConsiderations......................................3-10
RFAntenna..........................................3-10
GPSAntenna......................................... 3-11
SurgeArrestors........................................ 3-11
X.21/E1NetworkInterfaceConsiderations............................. 3-11
SpecialConsiderations.......................................3-12
Electrical Service Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Hazardous Materials and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
SeismicActiveAreas.....................................3-12
EnvironmentalConsiderations...................................3-13
Temperature.........................................3-13
Humidity...........................................3-13
CorrosiveEnvironment....................................3-14
AirQuality..........................................3-14
ElectricalRequirements......................................3-14
ApplicableCodesandPractices................................3-15
ACandDCPowerSupplies..................................3-15
ServiceCurrentRating..................................3-16
ACandDCCurrentLoad.................................3-20
BackupBattery......................................3-20
SurgeArrestors........................................3-21
PowerPanel.........................................3-21
UserAlarms,ControlOutputs,andDoorAlarm...........................3-21
GroundingRequirements .....................................3-22
Chapter 4: Hardware Installation
InstallationOverview....................................... 4-1
PersonnelConsiderations................................... 4-2
Receipt of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Pre-InstallationChecklist..................................... 4-3
CabinetTransportation....................................... 4-4
SafetyConsiderations..................................... 4-4
MovingtheMTS2Cabinet.................................. 4-4
LiftingtheMTS4andExpansionCabinet ........................... 4-4
CabinetInstallation........................................ 4-7
CabinetBracingConsiderations................................ 4-7
FloorMountingInstructions.................................. 4-8
MountingPlateInstructions.................................. 4-11
MountingaMountingPlate................................ 4-11
SecuringCabinettoaMountingPlate...........................4-15
WallFixing..........................................4-16
ElectricalConnections.......................................4-16
GroundingConnection ....................................4-17
BatterySystemGrounding.................................4-20
GroundConnectionsCheck................................4-20
PowerSupplyConnections ..................................4-20
–48 VDC Input Power and Backup Battery Charging Connections . . . . . . . . . . . . . . 4-20
110VAC–240VACInputPowerConnections.......................4-25
BackupBatterySensorConnections............................4-28
MTSLVDKitInstallation.................................4-31
RFAntennaConnections .....................................4-35
Expansion Cabinet Connections..................................4-37
TXConnections........................................4-38
iv 6802800U74-N September 2009

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual Contents
ConnectionsBetweenSiteControllerandXHUBController...................4-39
ConnectingPowertotheXHUBControllers..........................4-40
CANBusCabling.......................................4-41
RXConnection........................................4-41
GPSConnections.........................................4-43
SiteReferenceOperationModes................................4-44
TrackingCriteria.......................................4-45
GPSStartUp.........................................4-46
InitialStart........................................4-46
WarmStart........................................4-46
SoftRestart........................................4-46
Remote GPS Antenna/Receiver Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47
Remote GPS Receiver Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48
Remote GPS Receiver Cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48
GPSAntennaConnection...................................4-51
GPSAntennaLineLoss..................................4-52
AvoidingGPSInterference ..................................4-52
X.21, E1-120ΩCabling......................................4-53
EthernetSiteLinkCabling.....................................4-56
Ethernet Site Link RetrofitKit.................................4-56
Using Ethernet Site Link RetrofitKitforMTS2 ......................4-57
Using Ethernet Site Link RetrofitKitforMTS4 ......................4-58
Using Ethernet Site Link RetrofitKitforMTS4PrimeandExpansionCabinet........4-59
ExternalAlarmCabling......................................4-60
FinalCheck-out..........................................4-63
FinalCheck-outSetup.....................................4-63
ExpansionCabinetPower-Up.................................4-63
RecommendedTools,Parts,andTestEquipmentforInstallation...................4-65
RecommendedTools.....................................4-65
RecommendedTestEquipment.................................4-66
RecommendedParts......................................4-67
RecommendedTorque.....................................4-67
Screws............................................4-68
Chapter 5: Interconnection and Internal Cabling
AC/DCPowerCabling ...................................... 5-1
UserAlarms/Controls,X.21,RGPS,andGPSCabling........................ 5-7
E1andEthernetCabling...................................... 5-11
EthernetSiteLinkCabling...................................5-17
RFCabling............................................5-27
CANBusCabling.........................................5-51
MTS2CANBusCabling...................................5-51
MTS4CANBusCabling...................................5-54
ExpansionCabinetCANBusCabling .............................5-58
Chapter 6: Configuration and Testing
SetupandTestingOverview.................................... 6-1
Preparation............................................ 6-2
MMICommandsandMTSModesofOperation......................... 6-2
TestEquipment........................................ 6-3
ServiceCableandConnectorBoxDescription ......................... 6-4
ServiceTerminalSetup.................................... 6-7
CAN Bus Configuration...................................... 6-8
PSUCANBusCommands................................... 6-8
6802800U74-N September 2009 v

Contents
FansCANBusCommands .................................. 6-9
DPMCANBusCommands.................................. 6-9
ATCCCANBusCommands.................................. 6-9
OtherCANBusCommands..................................6-10
Site Controller Configuration and Verification............................6-10
SiteControllerSetup..................................... 6-11
E1ConnectionTest......................................6-12
X.21ConnectionTest.....................................6-12
SiteReferenceCheck.....................................6-12
Base Radio Configuration and Verification.............................6-13
BaseRadioStartupSequence.................................6-14
Selecting Base Radio Position and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
SettingandAccessingBaseRadioPosition...........................6-16
Setting and Accessing Base Radio Position Using Test Application. . . . . . . . . . . . . . 6-17
SettingandAccessingBaseRadioPositionUsingBoot1...................6-17
SettingBaseRadioIP.....................................6-18
Base Radio Receiver Configuration...............................6-19
Configuring the pm_config................................6-21
Station VerificationProcedures.................................6-22
Base Radio Software Revision Verification.........................6-22
BaseRadioTestApplicationSoftwareUpgrade(optional)..................6-23
Transmitter Verification..................................6-23
Receiver Verification...................................6-26
DisplayingBaseRadioAlarms...............................6-28
ViewingtheTransmitSpectrum(optional).........................6-29
SynchronizingNon-VolatileMemory(NVM)Regions......................6-30
Chapter 7: Radio Frequency Distribution System
RFDSTheoryofOperation .................................... 7-1
CANBus........................................... 7-2
RFDSFrequencyBandandBandwidth............................. 7-2
MTS2RFDS........................................... 7-3
MTS2FilterTray....................................... 7-3
MTS2Preselector ...................................... 7-6
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
MTS2Duplexer....................................... 7-9
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
HybridCombinerinMTS2..................................7-13
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
MTS4RFDS...........................................7-15
MTS4FilterTray.......................................7-15
MTS4Preselector ......................................7-19
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21
MTS4Duplexer.......................................7-22
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23
HybridCombinerinMTS4..................................7-25
PostFilter..........................................7-25
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27
CavityCombiner.......................................7-29
CavityCombiner-TheoryofOperation..........................7-29
Cavity Combiner - FRU Replacement Process . . . . . . . . . . . . . . . . . . . . . . . 7-30
ExpansionCabinetRFDS.....................................7-33
RXSplitter..........................................7-36
FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37
vi 6802800U74-N September 2009

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual Contents
CavityCombiner.......................................7-38
Chapter 8: Site Controller
SiteController-TheoryofOperation................................ 8-3
SiteController-Indicators,Switches,andConnectors........................ 8-4
SiteController-FrontPanel.................................. 8-4
SiteController-FrontPanelIndicators(LED)....................... 8-5
SiteController-FrontPanelSwitches........................... 8-7
SiteController-FrontPanelConnectors.......................... 8-7
SiteController-RearPanel.................................. 8-9
SiteController-RearPanelConnectors .......................... 8-9
SiteController-CANBus.....................................8-10
SiteController-UpdatingCANBusTrackIDMappingList...................8-13
SiteController-GPSModule...................................8-14
CheckingandReplacingSiteControllerLithiumBattery.......................8-15
MTS-RestorationProcedures...................................8-18
MTS–ReplacingSiteController................................8-19
MTS - ConfigurationBackup...............................8-19
MTS-ReplacingSiteControllerFRU...........................8-21
MTS-RestoringtheSiteControllerSoftware........................8-23
MTS - ConfiguringE1Links ...............................8-28
MTS - ConfiguringEthernetSiteLink...........................8-30
MTS - ConfiguringCANBus...............................8-33
MTS - ConfiguringCoolingFans .............................8-34
MTS-LoadingKi'sIntoMTS.................................8-34
MTS-RefreshingKi'sfortheMTS............................8-35
MTS-ConnectingKVLtotheAuC............................8-35
MTS-DownloadingKi'sfromtheAuCtoKVL(Locally)..................8-36
MTS-DownloadingKi'sfromtheAuCtoKVL(RemotelyUsingGSM)...........8-36
MTS-CheckingtheInventoryinKVL...........................8-37
MTS-DownloadingKi'sfromKVLtotheSiteController/BRC...............8-37
MTS - Uploading the Site Receipts (Locally) . . . . . . . . . . . . . . . . . . . . . . . . 8-38
MTS - Uploading the Site Receipts (Remotely using GSM) . . . . . . . . . . . . . . . . . 8-38
MTS-SiteControllerPost-RestorationChecks.........................8-39
MTS-SiteControllerPost-RestorationChecks......................8-39
AddingRedundantSiteController...............................8-43
ListofEquipmentintheExpansionKit...........................8-43
HowtoInstall ......................................8-44
ConfiguringRedundantSiteController...........................8-46
MTS–SiteControllerSoftwareVersionCheck.........................8-50
VerifyingTestApplicationVersion.............................8-50
UpgradingTestApplication................................8-51
Chapter 9: XHUB Controller
XHUBController–TheoryofOperation.............................. 9-2
XHUB Controller – Indicators, Switches, and Connectors...................... 9-3
XHUBController–FrontPanel................................ 9-4
XHUBController–FrontPanelIndicators(LED)...................... 9-4
XHUBController–FrontPanelSwitches.......................... 9-5
XHUBController–FrontPanelConnectors........................ 9-5
XHUBController–RearPanel ................................ 9-6
XHUB Controller – Rear PanelConnectors......................... 9-6
MTS-ReplacingXHUBControllerFRU.............................. 9-6
6802800U74-N September 2009 vii

Contents
Chapter 10: Base Radio
BaseRadio-Overview......................................10-2
BaseRadio-TheoryofOperation.................................10-3
Transceiver(XCVR).....................................10-6
Power Amplifier.......................................10-6
BaseRadio-IndicatorsandConnectors...............................10-8
Base Radio Replacement Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Electrostatic Discharge Precaution.............................. 10-10
BaseRadio-Restoration .................................. 10-11
Chapter 11: Power Supply Unit
PowerSupplyUnit(PSU)-TheoryofOperation .......................... 11-2
PSU-CANBusMonitoring,Alarms,andControls....................... 11-2
BackupBattery........................................ 11-4
BackupBatteryChargingProcedure............................ 11-4
Fans............................................. 11-5
PowerSupplyUnit(PSU)-Indicators,Switches,andConnectors................... 11-5
PSUIndicators(LEDs).................................... 11-6
PSUSwitch.......................................... 11-8
PSUConnectors ....................................... 11-8
Power Supply Unit (PSU) - FRU Replacement Process. . . . . . . . . . . . . . . . . . . . . . . 11-10
PSURemoval........................................ 11-10
PSUInstallation....................................... 11-10
PSUTrackIDUpdate.................................... 11-11
Chapter 12: Cooling Fans
CoolingFansOverview......................................12-1
CoolingFansTheoryofOperation.................................12-2
PSUFanControl.......................................12-3
AlarmsandControlsAvailableThroughPSUCANBusInterface.................12-3
Airflow............................................12-4
Cooling ...........................................12-5
Cooling Fans FRU Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6
Chapter 13: MTS Troubleshooting
SiteControllerTroubleshooting..................................13-1
SiteControllerFaultIndications................................13-1
LEDFaultIndications ....................................13-2
TroubleshootingFlowChart ...............................13-4
Troubleshooting:Power..................................13-5
Troubleshooting:statussc.................................13-5
Troubleshooting: SC ConfigFile..............................13-6
Troubleshooting:statusbts................................13-6
Troubleshooting: BRC ConfigFilesandCodeFile.....................13-7
Troubleshooting: General Check of a Site Controller File..................13-8
MMIFaultIndications.....................................13-9
Troubleshooting:GPSandSiteReferenceFaults......................13-9
GPS Receiver Detailed Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
TroubleshootingSiteLinkFaults............................. 13-14
OtherSiteControllerSymptoms............................... 13-20
Base Radio / RFDS / MiscellaneousTroubleshooting....................... 13-20
BaseRadioTroubleshooting................................. 13-20
viii 6802800U74-N September 2009

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual Contents
TroubleshootingOverview ............................... 13-20
BaseRadioAlarms................................... 13-21
RecommendedTestEquipment............................. 13-40
TroubleshootingProcedures............................... 13-40
RoutineCheckout.................................... 13-40
Reported/SuspectedProblem .............................. 13-42
BaseRadioFaultIndications................................. 13-43
MiscellaneousTroubleshooting ............................... 13-45
Chapter 14: Technical Specifications
Environmental and Standards Specifications.............................14-1
Environmental Specifications.................................14-1
Standards Specifications....................................14-2
Cabinet and Module Specifications.................................14-4
DimensionsoftheMTS2,MTS4,andMTS4ExpansionCabinets................14-4
RF Specifications.......................................14-4
Transmitter..........................................14-7
Receiver...........................................14-9
Site Controller Specifications ................................ 14-11
InternalGPSModuleInput ................................. 14-11
MTS 2 Duplexer Specifications ............................... 14-11
MTS 2 Preselector Specifications............................... 14-12
MTS 4 Duplexer Specifications ............................... 14-12
MTS 4 Post Filter Specifications............................... 14-13
MTS 4 Preselector Specifications............................... 14-13
Auto Tune Cavity Combiner (ATCC) Specifications...................... 14-13
Manual Tune Cavity Combiner (MTCC) Specifications.................... 14-14
Hybrid Combiner Specifications............................... 14-14
Base Radio Specifications.................................. 14-14
Power Supply Unit Specifications.............................. 14-15
XHUB Controller Specifications............................... 14-16
RX Splitter Specifications.................................. 14-16
ConnectorsUsedinMTS2andMTS4............................ 14-16
Chapter 15: Expansion Options
AddingAdditionalBaseRadiotoMTS2..............................15-2
ListofEquipmentintheExpansionKit.............................15-2
HowtoInstall.........................................15-2
Configuration........................................ 15-10
AddingAdditionalModuleCagetoMTS4............................ 15-10
ListofEquipmentintheExpansionKit............................ 15-10
HowtoInstall........................................ 15-11
Configuration........................................ 15-13
AddingAdditionalBaseRadiointoExistingModuleCageforMTS4................ 15-13
ListofEquipmentintheExpansionKit............................ 15-13
HowtoInstall........................................ 15-14
Configuration........................................ 15-24
AddingRedundantSiteController................................ 15-25
ListofEquipmentintheExpansionKit............................ 15-26
HowtoInstall........................................ 15-26
ConfiguringRedundantSiteController............................ 15-29
Expanding to 4 Channel CavityCombiner............................. 15-33
ListofEquipmentintheExpansionKit............................ 15-33
AutoTunedCavityCombiner.............................. 15-34
6802800U74-N September 2009 ix

Contents
ManualTunedCavityCombiner............................. 15-34
HowtoInstall........................................ 15-34
Configuration........................................ 15-37
ExpandingHybridCombiner................................... 15-38
ListofEquipmentintheExpansionKit............................ 15-38
HowtoInstall........................................ 15-38
Configuration........................................ 15-38
ExpandingfromMTS2toMTS4Cabinet............................ 15-39
ListofEquipmentintheExpansionKit............................ 15-39
HowtoInstall........................................ 15-39
Configuration........................................ 15-42
AddingRedundantXHUBController............................... 15-42
ListofEquipmentintheExpansionKit............................ 15-42
HowtoInstall........................................ 15-43
Configuration........................................ 15-43
Chapter 16: MTS 4 Outdoor Enclosure
Introduction............................................16-1
Appendix A: Field Replaceable Units (FRUs)
Field Replaceable Units for MTS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Field Replaceable Units for MTS 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
SurgeArrestorsandSuppliers................................... A-8
ACPowerandE1/X.21InterfaceSurgeArrestors........................ A-8
AntennaSurgeArrestors.................................... A-9
LightningArrestors...................................... A-9
Appendix B: Planned Maintenance Inspection (PMI)
Appendix C: Static Precautions and ESD Strap
Static Sensitive Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
ESD Wrist Strap Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
Appendix D: TETRA/Dimetra Acronyms
x6802800U74-N September 2009

List
of
Figures
List of Figures
■■■■■■■■■ ■■■■■■■■■ ■■■■■■■■ ■■■■■■■■■ ■■■■■■■■ ■
■
■
■
■
Figure1-1:MTS2Cabinet .................................... 1-3
Figure1-2:MTS4Cabinet .................................... 1-5
Figure1-3:MTSExpansionCabinet................................ 1-7
Figure3-1:MTS2CabinetDimensions............................... 3-4
Figure3-2:SuggestedMTS2SiteLayout.............................. 3-5
Figure3-3:MTS4CabinetDimensions............................... 3-6
Figure3-4:SuggestedMTS4SiteLayout.............................. 3-7
Figure3-5:ExpansionCabinetDimensions............................. 3-8
Figure3-6:SuggestedExpansionCabinetSiteLayout........................ 3-9
Figure3-7:Opto-isolatedAlarmInputStructure...........................3-22
Figure4-1:LiftingPointforMTS4andExpansionCabinet..................... 4-5
Figure 4-2: Placing the MTS 4 and the Expansion Cabinet in the Vertical or Horizontal Position . . . . 4-6
Figure4-3:MTS–MountingBrackets............................... 4-8
Figure4-4:MTS2–DrillHolePositionfortheMountingBrackets..................4-10
Figure 4-5: MTS 4 and Expansion Cabinet – Drill Hole Position for the Mounting Brackets . . . . . . 4-10
Figure4-6:MTS–MountingBracketsandtheCabinet ....................... 4-11
Figure4-7:MTSMountingPlate..................................4-12
Figure4-8:MTS2–DrillHolePositionfortheMountingPlate...................4-14
Figure4-9:MTS4–DrillHolePositionfortheMountingPlate...................4-14
Figure4-10:PositionofSecurityScrews..............................4-15
Figure4-11:MTS–WallFixing..................................4-16
Figure 4-12: Station Ground Point on the MTS 2 Junction Panel . . . . . . . . . . . . . . . . . . . 4-18
Figure 4-13: Station Ground Point on the MTS 4 Junction Panel . . . . . . . . . . . . . . . . . . . 4-18
Figure 4-14: Station Ground Point on the Expansion Cabinet Junction Panel. . . . . . . . . . . . . . 4-19
Figure4-15:CabinetGrounding..................................4-19
Figure4-16:–48VDCConnectionontheMTS2JunctionPanel...................4-21
Figure4-17:-48VDCConnectionsontheMTS4JunctionPanel ..................4-22
Figure 4-18: -48 VDC Connections on the Expansion Cabinet Junction Panel . . . . . . . . . . . . . 4-22
Figure 4-19: DC Plug MTS 2 (Motorola P/N 3166501A01) – Blue/Black Wires . . . . . . . . . . . . 4-24
Figure 4-20: DC Plug MTS 2 (Motorola P/N 3166501A01) – Red/Black Wires . . . . . . . . . . . . 4-24
Figure 4-21: DC Plug MTS 4 (Motorola P/N 3166501A02) – Blue/Black Wires . . . . . . . . . . . . 4-24
Figure 4-22: DC Plug MTS 4 (Motorola P/N 3166501A02) – Red/Black Wires . . . . . . . . . . . . 4-24
Figure 4-23: 110-240 VAC Connection on the MTS 2 Junction Panel . . . . . . . . . . . . . . . . . 4-26
Figure 4-24: 110 – 240 VAC Connections on the MTS 4 Junction Panel. . . . . . . . . . . . . . . . 4-26
Figure 4-25: 110-240 VAC Connections on the Expansion Cabinet Junction Panel . . . . . . . . . . . 4-27
Figure4-26:ACSocket(IECConnector)..............................4-28
Figure 4-27: Backup Battery Sensor ConnectiononMTS2JunctionPanel..............4-29
Figure 4-28: Backup Battery Sensor Connections on MTS 4 Junction Panel . . . . . . . . . . . . . . 4-29
Figure 4-29: Backup Battery Sensor Connections on Expansion Cabinet Junction Panel . . . . . . . . 4-30
Figure4-30:BackupBatteryTemperatureSensorCable.......................4-30
Figure4-31:MTSLVDKitRelayConnectionDiagram.......................4-32
Figure4-32:MTSLVDKitBatteryCableConnections.......................4-33
6802800U74-N September 2009 xi

List of Figures
Figure4-33:MTSLVDKitPlusandMinusSigns..........................4-33
Figure4-34:MTSLVDKitBackplatePlugs ............................4-34
Figure4-35:MountingtheMTSLVDKit..............................4-34
Figure4-36:BaseRadioAntennaConnections–MTS2.......................4-35
Figure4-37:BaseRadioAntennaConnections–MTS4.......................4-36
Figure 4-38: Connection Between MTS 4 Prime Cabinet and MTS 4 Expansion Cabinet – Phasing
Harness..............................................4-38
Figure 4-39: Connections Between MTS 4 Prime Cabinet and MTS 4 Expansion Cabinet – Two
Filters..............................................4-39
Figure4-40:ConnectionsBetweenSiteControllerandXHUBController...............4-40
Figure4-41:PowerConnectiontotheXHUBControllers......................4-41
Figure 4-42: RX Connection Between MTS 4 Prime Cabinet and MTS4 Expansion Cabinet . . . . . . 4-42
Figure4-43:HolesinTopLidforRxCables............................4-43
Figure 4-44: Remote GPS Receiver Connection on MTS 2 Junction Panel. . . . . . . . . . . . . . . 4-47
Figure 4-45: Remote GPS Receiver Connection on MTS 4 Junction Panel. . . . . . . . . . . . . . . 4-47
Figure 4-46: Connector Pin-outs and Color code of Deutsch Connector . . . . . . . . . . . . . . . . 4-48
Figure4-47:RGPSModularDataSurgeProtector..........................4-49
Figure4-48:RGPSConnectorPinout................................4-49
Figure4-49:GPSAntennaConnectiononMTS2JunctionPanel...................4-51
Figure4-50:GPSAntennaConnectiononMTS4JunctionPanel...................4-52
Figure 4-51: E1/X.21 and Ethernet Site Link Connectors on the MTS 2 Junction Panel. . . . . . . . . 4-53
Figure 4-52: E1/X.21 and Ethernet Site Link Connectors on the MTS 4 Junction Panel. . . . . . . . . 4-54
Figure4-53:SiteLinkConnectorE1Pinout.............................4-54
Figure4-54:SiteLinkConnectorX.21Pinout............................4-55
Figure4-55:AlarmWiringConnectiononMTS2JunctionPanel...................4-60
Figure4-56:AlarmWiringConnectiononMTS4JunctionPanel...................4-61
Figure4-57:ExternalAlarmConnectorPinout...........................4-61
Figure4-58:MTS2ScrewsPositions................................4-69
Figure4-59:MTS4ScrewsPositions................................4-70
Figure4-60:ExpansionCabinetScrewPositions..........................4-71
Figure5-1:AC/DCPowerCablingDiagramforMTS2....................... 5-2
Figure5-2:AC/DCPowerCablingDiagramforMTS4....................... 5-4
Figure5-3:AC/DCPowerCablingDiagramforExpansionCabinet.................. 5-6
Figure 5-4: User Alarms/Controls, X.21, RGPS,andGPSCablingDiagramforMTS2......... 5-8
Figure 5-5: User Alarms/Controls, X.21, RGPS and GPS Cabling Diagram for MTS 4 . . . . . . . . . 5-10
Figure5-6:E1andEthernetCablingDiagramforMTS2 ......................5-12
Figure5-7:E1andEthernetCablingDiagramforMTS4 ......................5-14
Figure 5-8: E1 and Ethernet Cabling for MTS 4 with Expansion Cabinet (to the Right). . . . . . . . . 5-16
Figure5-9:EthernetSiteLinkCablingforMTS2..........................5-18
Figure 5-10: Ethernet Site Link Cabling for MTS4withSingleSiteController............5-20
Figure 5-11: Ethernet Site Link Cabling for MTS 4 with Dual Site Controller . . . . . . . . . . . . . 5-22
Figure 5-12: Ethernet Site Link Cabling for MTS 4 Expansion Cabinet with Single Site Controller . . . 5-24
Figure 5-13: Ethernet Site Link Cabling for MTS 4 Expansion Cabinet with Dual Site Controller . . . . 5-26
Figure 5-14: RF Cabling Diagram for MTS 2 with One TX/RX ant. and Up to Two Additional RX
ant.................................................5-29
Figure 5-15: RF Cabling Diagram for MTS 2 with Two TX/RX ant. and Up to One Additional RX ant.
.................................................5-31
Figure 5-16: RF Cabling/Connections for MTS 4 with one TX/RX ant. and Up to Two Additional RX ant.
.................................................5-33
Figure 5-17: RF Cabling/Connections for MTS 4 with Two TX/RX ant. and Up to One Additional RX
ant.................................................5-35
Figure 5-18: RF Cabling/Connections for MTS 4 with One TX ant. and Up to Three Additional RX
ant.................................................5-37
Figure 5-19: RF Cabling/Connections for MTS 4 with Two TX ant. and Up to Three Additional RX
ant.................................................5-39
xii 6802800U74-N September 2009

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual List of Figures
Figure5-20:HolesinTopLidforRxCables............................5-41
Figure 5-21: RF Cabling/Connections for Expansion Cabinet with One TX/RX ant. and Up to Two Additional
RXant...............................................5-43
Figure 5-22: RF Cabling/Connections for Expansion Cabinet with Two TX/RX ant. and Up to One Additional
RXant...............................................5-45
Figure 5-23: RF Cabling/Connections for Expansion Cabinet with One TX ant. and Up to Three Additional
RXant...............................................5-48
Figure 5-24: RF Cabling/Connections for Expansion Cabinet with Two TX ant. and up to Three Additional
RXant...............................................5-50
Figure 5-25: CAN Bus Cabling Diagram for MTS 2 with TX/RX on 1 ant. RX on 2 ant. . . . . . . . . 5-52
Figure 5-26: CAN Bus Cabling Diagram for MTS 2 with TX/RX on 2 ant. RX on 1ant. . . . . . . . . 5-53
Figure 5-27: CAN Bus Cabling Diagram for MTS 4 with TX/RX or TX on 1 ant. . . . . . . . . . . . 5-55
Figure 5-28: CAN Bus Cabling Diagram for MTS 4 with TX/RX or TX on 2 ant. with ATCCs . . . . . 5-57
Figure 5-29: CAN Bus Cabling Diagram for MTS4 and Expansion Cabinet with ATCCs . . . . . . . . 5-59
Figure 5-30: CAN Bus Cabling Diagram for MTS4 and Expansion Cabinet with MTCCs and Redundant Site
Controller.............................................5-60
Figure6-1:BasicServiceCable.................................. 6-5
Figure6-2:ServiceConnectorBox................................. 6-6
Figure6-3:ServiceConnectorBoxPinout............................. 6-6
Figure6-4:BRCIndicators....................................6-15
Figure6-5:BaseRadiosCabinetPositionsandNumbering......................6-16
Figure6-6:SpectrumAnalyzerDisplayofTransmittedSignal....................6-29
Figure 7-1: MTS 2 TX/RX on 2 ant. - Filter Configuration...................... 7-4
Figure 7-2: MTS 2 TX/RX on 2 ant., RX on 1 ant - Filter Configuration................ 7-5
Figure 7-3: MTS 2 TX/RX on 1 ant., RX on 1 ant - Filter Configuration................ 7-5
Figure 7-4: MTS 2 TX/RX on 1 ant., RX on 2 ant - Filter Configuration................ 7-5
Figure7-5:MTS2Preselector................................... 7-6
Figure7-6:SchematicDiagramofMTS2Preselector........................ 7-7
Figure7-7:MTS2Duplexer.................................... 7-9
Figure7-8:SchematicDiagramofMTS2Duplexer.........................7-10
Figure7-9:HybridCombiner ...................................7-13
Figure 7-10: MTS 4 TX/RX on 2 ant. - Filter Configuration.....................7-16
Figure 7-11: MTS 4 TX/RX on 2 ant., RX on 1 ant. - Filter Configuration...............7-17
Figure 7-12: MTS 4 TX on 2 ant., RX on 2 ant. - Filter Configuration.................7-17
Figure 7-13: MTS 4 TX on 2 ant., RX on 3 ant. - Filter Configuration.................7-17
Figure 7-14: MTS 4 TX/RX on 1 ant., RX on 1 ant. - Filter Configuration...............7-18
Figure 7-15: MTS 4 TX/RX on 1 ant., RX on 2 ant. - Filter Configuration...............7-18
Figure 7-16: MTS 4 TX on 1 ant., RX on 2 ant. - Filter Configuration.................7-18
Figure 7-17: MTS 4 TX on 1 ant., RX on 3 ant. - Filter Configuration.................7-19
Figure7-18:MTS4Preselector..................................7-20
Figure7-19:SchematicDiagramofMTS4Preselector .......................7-20
Figure7-20:MTS4Duplexer...................................7-22
Figure7-21:SchematicDiagramofMTS4Duplexer........................7-23
Figure7-22:PostFilter......................................7-26
Figure7-23:SchematicDiagramofPostFilter...........................7-26
Figure7-24:AutoTuneCavityCombiner .............................7-29
Figure7-25:ExpansionCabinetwithSingleDiversity........................7-34
Figure 7-26: Expansion Cabinet with Dual Diversity.........................7-35
Figure7-27:ExpansionCabinetwithTripleDiversity........................7-35
Figure7-28:ExpansionCabinetRXSplitter.............................7-36
Figure 7-29: Schematic Diagram of RX Splitter...........................7-36
Figure8-1:SiteController-FrontView .............................. 8-2
Figure8-2:SiteController-RearView............................... 8-2
Figure 8-3: Site Controller-FunctionalBlockDiagram....................... 8-3
Figure8-4:SiteController-FrontPanel.............................. 8-4
6802800U74-N September 2009 xiii

List of Figures
Figure8-5:SiteController-RearPanel............................... 8-9
Figure8-6:SiteController-CANBus...............................8-10
Figure8-7:SiteController-CaptiveScrews ............................8-16
Figure8-8:SiteController-LithiumBatteryLocation........................8-17
Figure8-9:SiteController-CaptiveScrews ............................8-22
Figure9-1:XHUBController................................... 9-1
Figure9-2:XHUBController–FunctionalBlockDiagram...................... 9-3
Figure10-1:BaseRadio .....................................10-2
Figure10-2:BaseRadioFrontPanel................................10-3
Figure10-3:BaseRadio–FunctionalBlockDiagram........................10-5
Figure10-4:Low-powerPAFunctionalBlockDiagram.......................10-7
Figure10-5:High-powerPAFunctionalBlockDiagram.......................10-7
Figure11-1:PowerSupplyModule................................. 11-1
Figure11-2:PSUFrontPanel................................... 11-6
Figure12-1:MTSFankit.....................................12-2
Figure 12-2: MTS 2 Airflow....................................12-4
Figure 12-3: MTS 4 Airflow....................................12-5
Figure13-1:SiteControllerLEDs.................................13-3
Figure13-2:TroubleshootingFlowChart..............................13-4
Figure13-3:Procedure1TroubleshootingFlowchart....................... 13-41
Figure13-4:Procedure2TroubleshootingFlowchart....................... 13-42
Figure13-5:BaseRadioLEDs.................................. 13-43
Figure 15-1: RF Cabling Diagram for MTS 2 with one TX/RX ant. and up to two additional RX ant. before
Expansion............................................15-3
Figure 15-2: E1 and Ethernet Cabling Diagram for MTS 2 before Expansion . . . . . . . . . . . . . 15-4
Figure 15-3: RF Cabling Diagram for MTS 2 with one TX/RX ant. and up to two RX ant. after
Expansion............................................15-8
Figure15-4:E1andEthernetCablingDiagramforMTS2afterExpansion..............15-9
Figure 15-5: RF Cabling of MTS 4 with one TX ant. before Expansion . . . . . . . . . . . . . . . 15-15
Figure 15-6: RF Cabling of MTS 4 with twoTX ant. before Expansion . . . . . . . . . . . . . . . 15-16
Figure 15-7: E1 and Ethernet Connections of MTS 4 Before Expansion . . . . . . . . . . . . . . . 15-17
Figure15-8:TXConnectorsonCavityCombiner......................... 15-19
Figure 15-9: RF Cabling Diagram of MTS 4 with one TX ant. after Expansion . . . . . . . . . . . 15-21
Figure 15-10: RF Cabling Diagram ofMTS4withtwoTXant.afterExpansion........... 15-22
Figure15-11:E1andEthernetCablingofMTS4afterExpansion................. 15-23
Figure15-12:SiteController................................... 15-25
Figure15-13:ExampleofanAutoTunedCavityCombiner.................... 15-33
Figure 15-14: ATCC Cabling Diagram for MTS 4 with 1 TX ant. before Expansion . . . . . . . . . 15-35
Figure 15-15: ATCC Cabling Diagram for MTS 4 with 1 TX ant. after Expansion . . . . . . . . . . 15-37
Figure15-16:M4ScrewPosition................................. 15-40
Figure15-17:M3Screwposition................................. 15-41
FigureA-1:PositionofModulesinMTS2Cabinet......................... A-5
FigureA-2:PositionofModulesinMTS4cabinet ......................... A-6
FigureA-3:PositionofModulesinExpansionCabinet ....................... A-7
FigureC-1:ConnectingtheESDStrap............................... C-3
xiv 6802800U74-N September 2009