Motorola ASTRO XTS 2500 User manual

Motorola XTS-2500 User Guide
LTC/Hospital version October 2013
BASIC CONTROLS
ON/OFF – Volume (11)
Turn the radio on by rotating the
Power/Volume control knob clockwise.
Adjust the volume to a comfortable level
while pressing the volume adjust button
(15)
HOME select (17)
Press the button with the “house” icon to
change the radio to the programmed
HOME talkgroup.
PTT – Push to Talk (14)
Press and hold the PTT button and wait for
the triple beep (permission to talk) signal
from the AWIN network before speaking.
Display backlight (13)
In dark locations, to see the display, press
the backlight button. This is a toggle
button that turns the light on and off.
ZONE SELECTION
The Soft keys on the face of the radio can
be used to change between zones on the
radio. Press the soft key (7) under the
“zone” label in the display
Just like the function of a spreadsheet, the
scroll right arrow (18) steps to a higher
zone number until you pass the last zone,
after which it will roll over to the first
zone.
The scroll left arrow (18) functions the
same way, and will roll to the last zone
when you pass the first zone.
The channel selector knob (9) is used to
select a Talkgroup in the currently selected
zone.
The programming template is described
on the second page of this document. The
highlighted Talkgroups are of particular
interest to healthcare users.

Motorola XTS-2500 User Guide
LTC/Hospital version October 2013