Motorola DTR SERIES User manual

ENGLISH
M
QUICK REFERENCE
DTR SERIES™ PORTABLE RADIO
Programming
Your radio is ready to use after a fully-charged battery has been installed.
However, your radio should be programmed to ensure compatibility with existing
DTR Series radios and to fully utilize all features.
To enter Programming Mode:
1.Hold down and press the PTT button three times.
2.Press the Right .
3.Press .
4.Press the Left .
5.Hold down and press the PTT button three times.
2450
Antenna
Audio Jack
Connect audio accessories
Volume Controls
Push-to-Talk (PTT)
Option Keys
Home Key
Power Button
Menu Key
Navigation Keys
Use to scroll menu
Plug-in Charging
To select display options
Use to exit the current
Button
Microphone
and Connect Data
Accessories
idle screen
settings
menu and return to the
Speaker
Select
Program Menu
Contacts
Text Messages
Settings
Exit
Contacts
Program Text Messaging
Settings
Display
VibraCall
Clock/Alarm
Volume
Call Forward
Reset Defaults
Manager Mode*
Language
Radio History
Ambient Noise
Scroll List
Scan Lists
Advanced
* DTR2450 only.
Menu
See All Groups
For further information, refer to your specific product User Guide included on the CD-ROM.
243V01_DTRQuickRefCard_EN.fm Page 1 Thursday, June 15, 2006 11:38 AM

ENGLISH
GETTING STARTED
SENDING A VOICE CALL
RECEIVING A VOICE CALL
1. INSTALL THE BATTERY
Push down on the latch at the top of the battery door and lift
off the radio. Insert the battery, as shown, into the battery
compartment and press down to secure in place
2. CHARGE THE BATTERY
Connect the charger to the drop-in charging tray and insert
the radio. The battery meter on the radio display will stop
flashing when fully charged.
3. TURN THE RADIO ON
Press the Power Button (hold to turn off)
NOTE:Batteries are shipped uncharged from the factory. Always charge a new
battery to capacity before initial use, charge time is dependent upon
charger type.
1. Turn the radio on and select the recipient(s) by either:
• Selecting from the scroll list, using the navigation keys
• Selecting from Contacts by pressing Menu and using the navigation keys
• Selecting from Recent Calls by pressing Menu then selecting Recent Calls
2. Press and hold the PTT button on the side of the radio
until the talk permit tone is received, then speak clearly
into the microphone. If “User Not Available” displays, the
recipient is either in another radio call, out of range, or
turned off. Try to connect again. When making a group
call, at least one member of the group must be available.
3. Release the PTT button to listen.
1. Turn radio on and set volume level.
2. Switch to desired Public Group using the navigation keys
3. When a Private or Group call is received, it will be heard at the volume level
you have set. Press the PTT to respond.
MAN WITH RADIO
MOTOROLA, the Sylized M Logo, are registered in the
U.S. Patent and Trademark Office. All other product or
service names are the property of their respective
owners.
©Motorola, Inc. 2006. All rights reserved.
@6864243V01@
6864243V01 (EN)
243V01_DTRQuickRefCard_EN.fm Page 2 Thursday, June 15, 2006 11:38 AM