Motorola VERVE Loop User manual

LOOP
LOOP
en
Read me rst

Your wireless earbuds
Your wireless earbuds
1
en
Status Light
Volume
Volume
Power, Calls &
Music Control
+
_

Step 1: Charge up & power on
Step 1: Charge up & power on
2en
Note: Before use, charge until the status light turns blue.
(Wall charger
not included.)
Press and hold
Power
Power on.
Charge up.

Step 2: Pair with BluetoothTM
Step 2: Pair with BluetoothTM
3
en
1Turn on Bluetooth on your device.
2Turn on your wireless earbuds.
3On your device, go to the
Bluetooth menu to pair & connect.
Enter 0000 if prompted.
4When the device and earbuds
connect, you’ll hear a tone.
Light blinks blue
slowly.
Light blinks
blue.

Calls & Music Control
Calls & Music Control
4en
Press the buttons on the control box to control calls, voice
commands and music.
Note: Voice control may not work on some devices or in
all languages.
Volume up
+
Volume down
_
Music Play/Pause
Answer/End Calls
Or double press to play
the next track
Or triple press to restart
a track or play the last
track.
Note: Some features are phone/ network dependent.

Calls & Music Control 5
en
Music
play/pause press
volume down/up press or
next/previous track double press or triple press
change EQ setting press and at the same
time during music playback
Calls
answer/end call/ press
receive call in call
waiting mode and
music mode
mute during call press and hold and
reject a call press and hold or
Voice
to issue a voice press and hold or
command during idle or music playback
mode, then say the command

Advanced
Advanced
6en
Status Lights
Pairing mode blue indicator blinks twice
repeatedly
Connected blue indicator blinks twice
periodically
Low battery red indicator blinks slowly
Charging steady red
Full charge steady blue
Power o blue indicator comes on for 1 sec

Charge Level Check
Charge Level Check
7
en
Note: Your battery is designed to last the life of the
product. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
may damage the product and void your warranty.
Press and
hold +and –
together in
idle mode

Reset8 en
Reset
Turn o Bluetooth for all connected devices. Turn o the
wireless earbuds, then press and hold and both volume
buttons until the status light shows alternating red and blue
for ve times. You’ll hear a tone.

9
en
Hubble ConnectTM for VerveLifeTM
• Locate a lost earbud: Locate on a map the last time your
earbud was connected to your device.
• Voice Prompts (Android only): Choose either English voice
prompt or tone.
Hubble Connect for VerveLife can greatly enhance your
earbud experience. Download app for free at the App
Store®or Google PlayTM (AndroidTM 4.3 or higher)
Hubble Connect for VerveLife