Motorola CLS Series User manual

CLS SERIES
TWO-WAY RADIO
MODELS CLS1810T
USER GUIDE
'
6880309S61-TB
6880309S61-P.book Page 25 Wednesday, June 3, 2020 1:56 PM

6880309S61-P.book Page 26 Wednesday, June 3, 2020 1:56 PM

Contents
i
Documentation Copyrights ............. 1
Disclaimer ......................................... 1
Computer Software Copyrights ...... 2
Batteries, Chargers, and Audio
Accessories Safety Information 3
Operational Safety Guidelines ........ 4
Acoustic Safety ............................... 5
FCC Licensing Information ............. 7
Supplier's Declaration of Conformity 9
Class B Digital Device .................. 10
Radio Frequency Exposure Safety
Standards .................................. 11
Product Safety and RF Exposure
Compliance. .............................. 11
Notice to Users ............................... 12
Introduction .................................... 13
Radio Controls ............................... 14
Installing the Batteries .................. 15
Charging the Battery .................... 16
Turning Your Radio On and Off .... 19
Adjusting the Volume ................... 20
Reading the Display ...................... 20
Talking and Receiving ................... 21
Basic Radio Operation .................. 21
Signal Strength and Channel Busy
Indicators ................................... 21
Talk Range ................................... 22
Locking the Keypad ...................... 22
Monitoring a Channel .................... 22
Programming Mode ........................ 23
Entering Programming Mode ........ 23
Cloning Radio Settings .................. 24
Troubleshooting ............................ 25
......................................................... 28
6880309S61-P.book Page i Wednesday, June 3, 2020 1:56 PM

Notes
ii
6880309S61-P.book Page ii Wednesday, June 3, 2020 1:56 PM

Documentation Copyrights
1
Documentation Copyrights
No duplication or distribution of this document or any portion thereof shall take place
without the express written permission of Motorola Solutions.
No part of this manual may be reproduced, distributed, or transmitted in any form or
by any means, electronic or mechanical, for any purpose without the express written
permission of Motorola Solutions.
Disclaimer
The information in this document is carefully examined, and is believed to be entirely
reliable. However, no responsibility is assumed for inaccuracies.
Furthermore, Motorola Solutions reserves the right to make changes to any products
herein to improve readability, function, or design. Motorola Solutions does not
assume any liability arising out of the applications or use of any product or circuit
described herein; nor does it cover any license under its patent rights, nor the rights
of others.
6880309S61-P.book Page 1 Wednesday, June 3, 2020 1:56 PM

Computer Software Copyrights
2
Computer Software Copyrights
The information in this document is carefully examined, and is believed to be entirely
reliable. However, no responsibility is assumed for inaccuracies.
Furthermore, Motorola Solutions reserves the right to make changes to any products
herein to improve readability, function, or design. Motorola Solutions does not
assume any liability arising out of the applications or use of any product or circuit
described herein; nor does it cover any license under its patent rights, nor the rights
of others.
6880309S61-P.book Page 2 Wednesday, June 3, 2020 1:56 PM

Batteries, Chargers, and Audio Accesso-
3
Batteries, Chargers, and Audio Accessories Safety Information
This document contains important safety and operating instructions. Read these
instructions carefully and save them for future reference. Before using the battery
charger, read all the instructions and cautionary markings on:
• the charger
• the battery
• the radio attached with battery
1. To reduce risk of injury, charge only the rechargeable Motorola Solutions-
authorized batteries. Charging the other batteries may cause explosion, personal
injury, and damage.
2. Use of accessories not recommended by Motorola Solutions may result in fire,
electric shock, or injury.
3. To reduce damage to the electric plug and cord, pull by plug rather than the cord
when disconnecting the charger.
4. An extension cord should not be used unless necessary. Use of an improper
extension cord may result in fire and electric shock. If an extension cord must be
used, make sure that the cord size is 18 AWG for lengths up to 2.0 m (6.5 feet),
and 16 AWG for lengths up to 3.0 m (9.8 feet).
5. Do not operate the charger if it has been broken or damaged in any way. Take it
to any qualified Motorola Solutions service representatives.
6. Do not disassemble the charger; it is not repairable and replacement parts are
not available. Disassembly of the charger may result in risk of electrical shock or
6880309S61-P.book Page 3 Wednesday, June 3, 2020 1:56 PM

Batteries, Chargers, and Audio Accesso-
4
fire.
7. To reduce risk of electric shock, unplug the charger from the AC outlet before
attempting any maintenance or cleaning.
Operational Safety Guidelines
• Turn off the radio while charging.
• The charger is not suitable for outdoor. Use only in dry locations or conditions.
• Connect charger to an appropriately fused and wired supply of the correct voltage
(as specified on the product only).
• Disconnect charger from line voltage by removing main plug.
• Connect the equipment to an outlet which is easy to access and near.
• For equipment using fuses, replacements must comply with the type and rating
specified in the equipment instructions.
• Maximum ambient temperature around the power supply equipment must not
exceed 40 °C (104 °F).
• Power output from the power supply unit must not exceed the ratings stated on
the product label located at the bottom of the charger.
• Make sure the cord is not stepped on, tripped over, subjected to water, damage, or
stress.
6880309S61-P.book Page 4 Wednesday, June 3, 2020 1:56 PM

Batteries, Chargers, and Audio Accesso-
5
Acoustic Safety
To protect your hearing:
• Use the lowest volume necessary to do your job.
• Increase the volume only if you are in noisy surroundings.
• Reduce the volume before connecting headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• If you experience hearing discomfort, ringing in your ears, or speeches that are
muffled, you should stop listening to your radio through your headset or earpiece,
and have your hearing checked by your doctor.
Exposure to loud noises from any source for extended periods of time
may temporarily or permanently affect your hearing. The louder the
radio volume, the less time is required before your hearing can be
affected. Hearing damage from loud noises is sometimes
undetectable at first and can have a cumulative effect.
C a u t i o n
6880309S61-P.book Page 5 Wednesday, June 3, 2020 1:56 PM

Batteries, Chargers, and Audio Accesso-
6
Notes
6880309S61-P.book Page 6 Wednesday, June 3, 2020 1:56 PM

FCC Licensing Information
7
FCC Licensing Information
This device complies with Parts 90 and 15 of the Federal Communications
Commission (FCC) Rules. Operation is subject to the condition that this device does
not cause harmful interference. The radio operates on radio frequencies that are
regulated by the Federal Communications Commission (FCC). To transmit on these
frequencies, you are required to have a license issued by the FCC. Application is
made available on FCC Form 601 and Schedules D, H, and Remittance Form 159.
To obtain these FCC forms, request document 000601 which includes all forms and
instructions. If you wish to have the document faxed, mailed or have questions, use
the following contact information.
• Fax - Contact the Fax-On-Demand system at 1-202-418-0177
• Mail - Call the FCC forms hotline at 1-800-418-FORM or 1-800-418-3676
• Contact - For questions regarding FCC license, contact 1-888-CALL-FCC, 1-888-
225-5322, or http://www.fcc.gov.
Before filling out your application, you must decide which frequency you can operate
on. Refer to “Frequencies and Bandwidth” section for frequency information. For
questions on determining the radio frequency, call Motorola Solutions Product
Services at: 1-800-448-6686.
Changes or modifications not expressly approved by Motorola Solutions may void
the user authority granted by the FCC to operate this radio and should not be made.
6880309S61-P.book Page 7 Wednesday, June 3, 2020 1:56 PM

FCC Licensing Information
8
To comply with FCC requirements, transmitter adjustments should be made only by
or under the supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed services as
certified by an organization representative of the user of those services.
Replacement of any transmitter component such as crystal, semiconductor, and
others not authorized by the FCC equipment authorization for this radio could violate
FCC rules.
Note: Use of this radio outside the country where it was intended to be distributed is
subject to government regulations and may be prohibited.
6880309S61-P.book Page 8 Wednesday, June 3, 2020 1:56 PM

Supplier's Declaration of Conformity
9
Supplier's Declaration of Conformity
Supplier’s Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Name: Motorola Solutions, Inc.
Address: 2000 Progress Pkwy,
Schaumburg, Il. 60196, U.S.A.
Phone Number: 1-800-927-2744
Hereby declares that the product:
Model Name: CLS1810T
conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d), and
section 15.109(a)
6880309S61-P.book Page 9 Wednesday, June 3, 2020 1:56 PM

Supplier's Declaration of Conformity
10
Class B Digital Device
For a Class B digital device or peripheral, the instructions furnished the user shall
include the following or similar statement, placed in a prominent location in the text
of the manual:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
6880309S61-P.book Page 10 Wednesday, June 3, 2020 1:56 PM

Radio Frequency Exposure Safety Stan-
11
Radio Frequency Exposure Safety Standards
Product Safety and RF Exposure Compliance.
•
ATTENTION
This radio is restricted to Occupational use only to satisfy FCC RF energy
exposure requirements. Before using the radio, read the RF Energy Exposure and
Product Safety Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness and control for
Compliance with applicable standards and Regulations.
For a list of Motorola Solutions-approved antennas, batteries, and other accessories,
visit the following website:
http://www.motorolasolutions.com
C a u t i o n
Before using the radio, read the operating instructions for safe usage
contained in the Product Safety and RF Exposure booklet contained with
your radio.
6880309S61-P.book Page 11 Wednesday, June 3, 2020 1:56 PM

Notice to Users
12
Notice to Users
This device complies with Part 15 of the FCC rules per the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications made to this device, not expressly
approved by Motorola Solutions, could void the authority of the
user to operate this equipment.
C a u t i o n
6880309S61-P.book Page 12 Wednesday, June 3, 2020 1:56 PM

Introduction
13
Introduction
This user guide covers the operation of your radios.
Your dealer or system administrator may have customized your radio for your specific
needs. Check with your dealer or system administrator for more information.
You can consult your dealer or system administrator about the following:
• Is your radio programmed with any preset conventional channels?
• Which buttons have been programmed to access other features?
• What optional accessories may suit your needs?
• What are the best radio usage practices for effective communication?
• What maintenance procedures that helps promote longer radio life?
For product information, refer to www.motorolasolutions.com
For product related questions, contact
1-800-448-6686
6880309S61-P.book Page 13 Wednesday, June 3, 2020 1:56 PM

Radio Controls
14
Radio Controls
020976o
Use to:
Turn radio on/off
Adjust radio volume
Use Push to Talk to:
Tal k
Exit a menu
Use to:
Lock the keypad
Use to:
Monitor the frequency
Microphone
Accessory Jack
Speaker
Use and to:
Change channels
Change menu settings
6880309S61-P.book Page 14 Wednesday, June 3, 2020 1:56 PM

Radio Controls
15
Installing the Batteries
Your radio uses a rechargeable Lithium Ion (Li-Ion) battery.
Li-Ion Battery
1. If the battery door is already in place, push down on the
recess on the door and slide it off the radio.
2. Insert the battery, printed arrows first, into the battery
compartment and press down to secure firmly in place.
3. Slide and snap the battery door into place.
6880309S61-P.book Page 15 Wednesday, June 3, 2020 1:56 PM

Radio Controls
16
Charging the Battery
Use only the charger supplied with the radio, or other Series power
accessories. For optimum battery life, do not charge the battery for prolonged periods
after it is fully charged. Charging the battery over the weekend is acceptable.
Using the Drop-in Charger
1. Place the charger on a flat surface.
2. Insert the plug of the power cord into the jack
on the charger.
3. Plug the cord into an AC outlet.
4. Turn the radio off.
5. Insert the radio (with battery installed) into
the front charging pocket.
Note: The radio will fit in the charger with the holster on.
The drop-in charger will also sequentially charge
a spare Li-Ion battery. The spare battery will not
begin to charge until the radio battery is fully
charged. Both batteries will charge in approximately 8 to 10 hours.
6880309S61-P.book Page 16 Wednesday, June 3, 2020 1:56 PM