Mountain Buggy protect i-Size User manual

3

5

7
8
910
13
11
12
14

7

...as a child safety seat installed in a vehicle

9

for the protection of your baby

11

13
Press the harness release button
and at the same time pull both
shoulder straps forward.

15
Pull the strap end
Caution! Pull the strap end straight
towards you, not upwards or
downwards. Please pay attention to
the strap end. Whilst travelling
(especially outside the car) it should
always be attached to the cover.
For the safety of your baby, please check that…

17
The baby insert is only suitable
for infants with height from 40 to
75CM. If your child is taller than
75CM, please take out the baby
insert
Unfold support leg until it
locks in place. Press the
ISOFIX release buttonto
slide the lSOFIX connectors
to theend.
Caution: Please only move to next step
when ISOFIX has been slid to the end
and the red marks have appeared.

19
Put the
infant
carrier into
the base.
Unfold support leg
until it locks in place.
Press the ISOFIX
release button to
slide the ISOFIX
connectors to the
end.