Movado Connect Instruction Manual

Connect your watch with your phone
Your Android Wear watch works together with your phone, so you'll need to connect
them.
Before you start, make sure your watch and phone are compatible.
1. Turn on your watch.
2. On your phone, open the Android Wear app . Tap Set it up.
3. When you see your watch’s name, tap it.
4. You’ll see a code on your phone and watch.
If the codes are the same: On your phone, tap Pair. Pairing can take a few minutes, so be
patient.
If the codes are different: Restart your watch and try again. If the codes still don't
match, try these troubleshooting steps.
5. To finish set up, follow the onscreen instructions. Make sure the box for notifications to
Android Wear is checked.
Note: When your phone and watch are paired, you’ll see "Connected" on the Android
Wear app on your phone. When they’re not paired, you’ll see Disconnected on
your watch’s screen.
Change your watch's language
Your watch's language will be the same as your phone's. To change the language on your
watch, switch to a new language on the device it's connected with.
Connect multiple watches
You can pair multiple watches to a single phone or tablet.
1. Pair the first watch using the steps above.
2. For the next watches, follow steps 1-5 above.
3. Instead of seeing a pairing code, on your phone, tap the triangle next to the watch's
name.
4. Tap Pair with a new watch and follow the instructions on the screen to finish.
Note: You can’t pair a watch with more than one phone or tablet.

Related help
If you're having trouble connecting your watch, try these troubleshooting steps.
Different ways to pair your watch
Android phone users only: You can pair multiple watches to one phone or tablet.
But you can only pair your watch with one iPhone, Android phone or tablet at a time.
If you have more than one phone or tablet you want to pair with your watch, or if you have
more than one watch, keep in mind the following:
One watch and multiple phones or tablets
You can’t pair one watch with multiple phones or tablets at the same time.
You can switch which phone or tablet your watch is paired with, but you need to reset
your watch to factory settings first. Then you can pair your watch to the new phone or
tablet.

For watches paired with Android: Multiple watches and one phone or tablet
The below information applies only to watches paired with Android devices.
You can pair multiple watches to a single phone or tablet. Simply repeat the pairing
steps for each watch. Below the watch you’ll see if it’s connected or disconnected. Your
watch will be disconnected if it can’t communicate with your phone or if you’ve
chosen to disconnect it from the settings.
Only one watch can be paired with an iPhone at a time.
Trouble pairing existing watch to a new phone
You can pair an existing watch with a new phone or tablet, but you need to reset your
watch to factory settings first. Then you can pair your watch.
Connect to Wi-Fi
The information in this article applies only to Android Wear 2.0 or up. Check your watch's
version of Android Wear.
Your watch can automatically connect to saved Wi-Fi networks when it loses the Bluetooth
connection with your phone.
Get started
1. If your screen is dim, tap it to wake up the watch.
2. Swipe down from the top of the screen.
Android Wear 2.0 and up: Tap Settings scroll down and tap Connectivity
Android Wear 1.5 and below: Swipe left and tap Settings
3. If Wi-Fi is set to off, tap Wi-Fi to turn it on Automatic.
Add or change your watch’s Wi-Fi network
1. If your screen is dim, tap it to wake up the watch.
2. Swipe down from the top of the screen.
Android Wear 2.0 and up: Tap Settings scroll down and tap Connectivity

Android Wear 1.5 and below: Swipe left and tap Settings
3. Tap Wi-Fi Add Network.
4. To enter a password if a password is required, tap Enter on phone. When prompted, enter
the password on your phone. Then tap Connect.
Follow the same steps to change the W-Fi network your watch connects to.
Note: Your watch can't connect to Wi-Fi networks that take you to a page before you can
connect (for example, Wi-Fi networks at places like hotels or coffee shops).
Trouble connecting your watch to Wi-Fi?
If you're using Android Wear 1.5 or below, learn how to troubleshoot your watch's Wi-Fi
connection.
Connect Bluetooth devices to your watch
Note: The steps below are different depending on your watch's Android Wear version.
Check your watch's Android Wear version.
You can pair Bluetooth accessories, such as headphones or a heart rate monitor, to your
watch.
Connect Bluetooth headphones
You can use Bluetooth headphones to listen to audio from your watch.
Step 1: Get headphones ready
Follow the instructions that came with your Bluetooth headphones to put them in pairing
mode.
Step 2: Connect your watch
Learn how to check your watch's version of Android Wear.
1. If your screen is dim, tap the screen to wake up the watch.
2. Swipe down from the top of the screen.

Android Wear 2.0 and up: Tap Settings System Connectivity Bluetooth
Available devices
Android Wear 1.5 and below: Swipe left and tap Settings Devices
3. Your watch will search for nearby devices. When you see the name of your headphones,
tap it to connect.
Your watch will then connect with the headphones.
Connect a Bluetooth device that has an app
Some Bluetooth devices, like heart rate monitors, come with an app for your watch. If you
have one of these, open its app on your watch. Follow the instructions to pair the accessory
to your watch
Note: Android Wear does not support ANT+ accessories.
